• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.488-490
• /
• 2008

This study aims to design the high-capacity vol-oxidizer using simulated fuels instead of spent nuclear fuels. Simulated fuels are fabricated by blending tungsten powder with silicon carbide powder, and thereafter, paraffin coating covers simulated fuels to increase their strength. An oxidation experiment using simulated fuels have been carried out in order to analyze oxidation characteristics similar to spent fuels. After oxidation, simulated fuels were almost oxidized to be powders. Increased volume of simulated fuels approached to spent fuels. These results can be utilized as important informations for designing a high-capacity vol-oxidizer.

• Journal of the Korean Ceramic Society
• /
• v.56 no.3
• /
• pp.233-255
• /
• 2019

Thermal batteries are reserve batteries with molten salts as an electrolyte, which activates at high temperature. Due to their excellent reliability, long shelf life, and mechanical robustness, thermal batteries are used in military applications. A high-performance cathode for thermal batteries should be considered in terms of its high capacity, high voltage, and high thermal stability. Research progress on cathode materials from the recent decade is reviewed in this article. The major directions of research were surface modification, compounding of existing materials, fabrication of thin film cathode, and development of new materials. In order to develop a high-performance cathode, a proper combination of these research directions is required while considering mass production and cost.

• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.4
• /
• pp.247-262
• /
• 1979

Majority of reclaimable soils in hillside lands in Korea are red yellow soils, with exception in Jeju island, where most of reclaimable hillside lands are composed of volcanic ash soils. Songjeong, Yesan and Samgag series are the major soil series of red yellow soils which are available for the reclamation. When observed in the fields, they are distinguished as reddish brown clay loam, red yellow sand loam and yellowish brown sand loam. They have moderately good physical properties but their chemical properties are generally poor for crop cultivations. The chemical properties of red yellow soils, as compared to long time cultivated (matured) soils, are characterized by very low pH, high in exchangeable Al content and phosphorus fixation capacity. Also extraodinary low available phosphorus and organic matter contents are generally observed. On the other, the chemical properties of volcanic ash soils are characterized by high armophous Fe and Al hydroxides and organic matter contents, which are the causative factors for the extremely high phosphorus fixation capacity of the soils. The phosphorus fixation capacity of volcanic acid soils are as high as 5-10 times of that of red yellow soils. Poor growth of crops on newly reclaimed red yellow soils are mainly caused by very low available P and pH and high exchangeable Al. Relatively high P fixation capacity renders the failure of effective use of applied P when the amount of application is not sufficient. Applications of lime to remove the exchangeable Al and relatively large quantity of P to lower the P fixation capacity and to increase the available P are the major recommendations for the increased crop production on red yellow hillside soils. Generally recommendable amounts of lime and P to meet the aforementioned requirements, are 200-250kg/10a of lime and $30-35kg\;P_2O_5/10a$. Over doses of lime. frequently induces the K, B, arid Zn deficiencies and lowers the uptake of P. In volcanic ash soils, it is difficult to alter the exchangeable Al and the P fixation capacity by liming and P application. This may be due to the peculiarity of volcanic ash soil in chemical properties. Because of this feature, the amelioration of volcanic ash soils is not as easy as in the case of red yellow soils. Application of P as high as $100kg\;P_2O_5/10a$ is needed to bring forth the significant yield response in barley. Combined applications of appropriate levels of P, lime, and organic matter, accompanied by deep plowing, results in around doubling of the yields of various crops on newly reclaimed red yellow soils.

• Journal of Korean Society on Water Environment
• /
• v.21 no.6
• /
• pp.569-574
• /
• 2005

In this study, alginic acid that had an high affinity for a heavy metal and was noted for biological adsorbent was modified by an oxidizer, $KMnO_4$. Chemical modification changed hydroxyl of the alginic acid into carboxyl and compare with alginic acid, modified alginic acid exhibited a characteristics that carboxyl groups are comparatively high. For the use of them as an adsorbent, beads were prepared by dropping alginic acid and modified alginic acid solution in dilute 2 wt% $CaCl_2$ solution for non water soluble. The amount of removed $Cu^{2+}$ and $Pb^{2+}$ by modified alginic acid beads showed 84.7 mg and 90.9 mg per gram of beads, respectively. And it showed the amount of adsorbed heavy metal ions 10~20% higher than that of alginic acid beads in range of pH 4~7. In particular, modified alginic acid have a good adsorption capacity for $Cu^{2+}$ and $Pb^{2+}$ by Freundlich adsorption isotherm. According to this study, it is verified that alginic acid that is a nature high molecular substance improved capacity for actual application by increased heavy metal adsorption capacity by chemical modification.

• Korean Journal of Food Science and Technology
• /
• v.22 no.7
• /
• pp.805-811
• /
• 1990

Hydrolysis of soybean proteins was carried out by immobilized trypsin and/or alpha-chymotrypsin. The partially hydrolyzed products of soybean proteins were evaluated for their molecular weights and molecular charges by using Ferguson's plot. The ratio of average molecular weights to average molecular charges($\bar{M}/log\;\bar{Y}_o$) of modified soybean proteins could be used to predict functional properties such as solubility, water holding capacity, oil holding capacity, and emulsifying ability. The low ratio of modified soybean proteins indicated high solubility. while the high ratio showed high water holding capacity. The appropriate ranges of the ratios were necessary for maximun oil holding capacity and emulsifying ability.

• Steel and Composite Structures
• /
• v.33 no.4
• /
• pp.583-594
• /
• 2019

In the areas highly exposed to earthquakes, concrete-filled steel tube columns (CFSTCs) are known to provide superior structural aspects such as (i) high strength for good seismic performance (ii) high ductility (iii) enhanced energy absorption (iv) confining pressure to concrete, (v) high section modulus, etc. Numerous studies were reported on behavior of CFSTCs under axial compression loadings. This paper presents an analytical model to predict ultimate load capacity of CFSTCs with circular sections under axial load by using multivariate adaptive regression splines (MARS). MARS is a nonlinear and non-parametric regression methodology. After careful study of literature, 150 comprehensive experimental data presented in the previous studies were examined to prepare a data set and the dependent variables such as geometrical and mechanical properties of circular CFST system have been identified. Basically, MARS model establishes a relation between predictors and dependent variables. Separate regression lines can be formed through the concept of divide and conquers strategy. About 70% of the consolidated data has been used for development of model and the rest of the data has been used for validation of the model. Proper care has been taken such that the input data consists of all ranges of variables. From the studies, it is noted that the predicted ultimate axial load capacity of CFSTCs is found to match with the corresponding experimental observations of literature.

• Structural Monitoring and Maintenance
• /
• v.6 no.1
• /
• pp.19-32
• /
• 2019

One way to provide safe buildings and to protect tenants from the terrorist attacks that have been increasing in the world is to study the behavior of buildings members after being exposed to dynamic loads. Buildings behaviour after being exposed to attacks inspired researchers all around the world to investigate the effect of impact loads on buildings members like slabs and to deeply study the properties of High Performance Concrete. HPC is well-known in its high performance and resistance to dynamic loads when it is compared with normal weight concrete. Therefore, the aim of this paper is finding out the impact of dynamic loads on RPC slabs' flexural capacity, serviceability loads, and failure type. For that purpose and to get answers for these questions, three concrete slabs with 0.5, 1, and 2% steel fiber contents were experimentally tested. The tests results showed that the content of steel fiber plays the key role in specifying the static capacity of concrete slabs after being dynamically loaded, and increasing the content of steel fiber led to improving the static loading capacity, decreased the cracks numbers and widths at the same time, and provided a safer environment for the buildings residents.

• Journal of Advanced Information Technology and Convergence
• /
• v.10 no.2
• /
• pp.91-101
• /
• 2020

Recently, the demand for high penetration of variable renewable energy (VRE) penetration in a power system is increased. In consequence, distribution systems including microgrids confront the increased installation of VRE-based distributed generation. Despite of the high demand of VRE-based distributed generation in a distribution system, the installation of photovoltaic (PV) system in a distribution system has been restricted by various problems. In other words, the hosting capacity for high VRE penetration in a distribution system is limited. This paper analyzes the improvements of hosting capacity VRE penetration of stand-alone microgrid (SAMG) with energy storage system (ESS) by considering virtual-slack (VS) control based on power sensitivity. With the pre-defined power sensitivity, the ESS operates as virtual slack in the SAMG by controlling its bus voltage and phase angle indirectly. Therefore, the ESS enables the increase of VRE penetration in the SAMG. The proposed VS control is realized by analyzing the ESS as a virtual slack in power flow analysis based on power sensitivity. Then its validity is demonstrated with the case study on the SAMG in South Korea with practical data.

• Steel and Composite Structures
• /
• v.52 no.4
• /
• pp.475-485
• /
• 2024

The mechanical behavior of the steel tube encased high-strength concrete (STHC) composite walls under constant axial load and cyclically increasing lateral load was studied. Conclusions are drawn based on experimental observations, grey evolutionary algorithm and finite element (FE) simulations. The use of steel tube wall panels improved the load capacity and ductility of the specimens. STHC composite walls withstand more load cycles and show more stable hysteresis performance than conventional high strength concrete (HSC) walls. After the maximum load, the bearing capacity of the STHC composite wall was gradually reduced, and the wall did not collapse under the influence of the steel pipe. For analysis of the bending capacity of STHC composite walls based on artificial intelligence tools, an analysis model is proposed that takes into account the limiting effect of steel pipes. The results of this model agree well with the test results, indicating that the model can be used to predict the bearing capacity of STHC composite walls. Based on a reasonable material constitutive model and the limiting effect of steel pipes, a finite element model of the STHC composite wall was created. The finite elements agree well with the experimental results in terms of hysteresis curve, load-deformation curve and peak load.

• PNF and Movement
• /
• v.16 no.2
• /
• pp.187-194
• /
• 2018

Purpose: This study aimed to assess the effect of rowing ergometer training on the aerobic capacity and strength of male high school students over a 12-week period. Methods: Fourteen high school students volunteered to participate in the study. The subjects were divided into two groups: seven subjects in the experimental group and seven in the control group. The subjects in the experimental group performed rowing ergometer training for 75 min per session at three days a week for 12 weeks. The exercise intensity set the maximum heart rate (HRmax) from 40% to 80%. Aerobic capacity was measured by ventilation, cardiac output, and oxygen intake per body weight. Strength was measured by grip strength and back strength before and after training. Results: A significantly increased ventilation (p=0.01), cardiac output (p=0.01), and oxygen intake per body weight (p=0.00) were found in the experimental group. A significantly increased grip strength in the right and left hands (p=0.00, 0.00) and back strength (p=0.04) were observed in the experimental group. Conclusion: Rowing ergometer training can be an effective combined exercise for aerobic capacity and strength of high school students.