• 한국통신학회논문지
• /
• 제35권1B호
• /
• pp.62-67
• /
• 2010

본 연구는 다양한 산업 환경에 적용되는 RFID 태그 개발에 있어 RFID 태그 패키징 개발과 RFID 태그 플립칩(flip chip) 접합 방법이 산업 환경 맞춤형 RFID 태그 개발에 미치는 영향에 대해 분석하였다. RFID 태그 플립칩(flip chip) 접합은 와이어 접합(wire bonding), 초음파 접합(ultrasonic bonding), 열융착 접합(heat plate bonding), 레이저 접합(laser bonding)으로 구분되어 있으며, 이런 접합 방법은 다양한 RFID 태그 개발의 적용 환경에 따라 적합한 접합 방법이 있음을 본 연구를 통해서 알 수 있었다. 극고온, 극저온, 다습, 고내구성 등 다양한 산업 환경 중 극고온 환경에서의 RFID 태그 개발은 빛 에너지를 흡수하여 열 에너지로 전환하는 레이저 접합 방법과 직접적인 열 전달 방식인 열융착 접합 방법은 접속 재료인 ACF의 손상으로 인해 부적합하고, 와이어를 이용하여 직접 범프와 패턴을 연결하는 와이어 접합 방법이 적합함을 알 수 있었다.

• The Korean Journal of Ecology
• /
• 제14권4호
• /
• pp.399-413
• /
• 1991

Benthic macroinvertebrate communities and environments at the upper and lower sites of levees in the middle reaches of paenae stream, a tributary of the naktong river,were investigated in four seasons from August 1989 to may 1990. Current velocities were significantly fast at the loer sites than the upper sites of levees. Substratum compositions were also different between these two sites. Abundances of major species of benthic macroinvertebrates occurring in four seasons were primarily dtermined by temperature. in each location of levees, however, current velocities and substratum particle sizrs were important in determining species were generally higher than upper sites of levees. Biological indices were also high at the lower sites of levees. diversity, evenness and dominance indices were positively correlated with the quantity of the middle-sized large pebbles(3∼5cm in diameter) in stream bed.

• 제어로봇시스템학회논문지
• /
• 제22권5호
• /
• pp.367-373
• /
• 2016

In this paper, range measurement performance of LRF (Laser Range Finder) module and image contrast of color CCD camera are evaluated under the aerosol (high temperature steam) environments, which are simulated severe accident conditions of the LWR (Light-Water-Reactor) nuclear power plant. Data of LRF and color CCD camera are key informations, which are needed in the implementation of SLAM (Simultaneous Localization and Mapping) function for emergency response robot system to cope with urgently accidents of the nuclear power plant.

• 한국세라믹학회지
• /
• 제47권6호
• /
• pp.578-582
• /
• 2010

$ZrB_2$ has a melting point of $3245^{\circ}C$ and a relatively low density of $6.1\;g/cm^3$, which makes this a candidate for application to ultrahigh temperature environments over $2000^{\circ}C$. Beside these properties, $ZrB_2$ is known to have excellent resistance to thermal shock and oxidation compared with other non-oxide engineering ceramics. In order to enhance such oxidation resistance, SiC was frequently added to $ZrB_2$-based systems. Due to nonsinterability of $ZrB_2$-based ceramics, research on the sintering aids such as $B_4C$ or $MoSi_2$ becomes popular recently. In this study, densification and high-temperature properties of $ZrB_2$-SiC ceramics especially with $B_4C$ are investigated. $ZrB_2$-20 vol% SiC system was selected as a basic composition and $B_4C$ or C was added to this system in some extents. Mixed powders were sintered using hot pressing (HP). With sintered bodies, densification behavior and high-temperature (up to $1400^{\circ}C$) properties such as flexural strength, hardness, and so on were examined.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2004년도 학술대회지
• /
• pp.209-212
• /
• 2004

The O-ring seal is a usual component part in various mechanical apparatuses for sealing that makes efficient performance of the equipments. The sealing performance of 0-ring is effected in environments of the O-ring seal, like that applied pressures, working temperatures, interferences and materials. In this paper, an pressurized, NBR O-ring is calculated by experimental methods and analysed numerically using the MARC finite element program. The calculated experimental and FEM results showed that the Contact force O-ring decreases as a function of temperature.

• Journal of Ginseng Research
• /
• 제12권1호
• /
• pp.53-62
• /
• 1988

A field experiment was conducted in the arid interior of British Columbia, Canada to assess the seasonal soil temperature and moisture regimes in an American ginseng garden. As a consequence of the man-modified microclimate (elevated shade canopy and surface covering of mulch), the growing environment of the crop was fundamentally altered when compared to adjacent agricultural growing environments. In the ginseng garden, soil temperatures were found to remain low throughout the growing season whereas soil moisture remained high when compared with the outside garden environment. These results indicate that even in the hot, arid environment of the interior of British Columbia, the growing of ginseng is undertaken in sub-optimal conditions for the major part of the growing season. This poses challenges for the producers of the crop to modify the architecture of the gardens to enhance the soil regime without creating a deleterious aerial environment.

• 설비공학논문집
• /
• 제24권5호
• /
• pp.443-453
• /
• 2012

This study examines visual perception and spatial satisfaction according to lighting conditions. Field measurements and surveys were performed in three rest space of university buildings where various lighting conditions were employed. Results indicate that overall impression of space improved when low color temperature, such as 3,000 K governed overall lighting environment and accent lighting was used for wall surfaces. Lighting conditions that kept uniform illuminance levels using area light sources containing fluorescent lamps with 6,500 K failed to keep favorable spatial satisfaction for space. High color temperature was not recommended for lighting in rest space. Asymmetrical illuminance levels formed by low color temperature such as 3000 K is recommended to keep positive mood and improve spatial satisfaction in rest space. Overall impression of the space was influenced by visual comfort, color temperature, spatial satisfaction and brightness. Spatial satisfaction for space was effectively impacted by psychological comfort, color temperature and overall impression for lighting conditions. Psychological comfort in space was influenced by color temperature, spatial satisfaction and visual annoyance from reflected light.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2000년도 제21회 KOSCO SYMPOSIUM 논문집
• /
• pp.168-174
• /
• 2000

A diode laser sensor system based on absorption spectroscopy techniques has been developed to measure $CO_2$ concentration and temperature non-intrusively in high temperature combustion environments using a 2.0 ${\mu}m$ DFB(Distributed Feedback) laser. Two optics was fabricated in pig-tail fashion and all optical components were implemented in a single box. The evolution of measurement sensitivity was done using test cell by changing sweep frequency and $CO_2$ concentration. Gas temperature was determined from the ratio of integrated line strengths. Species concentration was determined from the integrated line intensity and the measured temperature. The result show that the system has 2% error in wide operation frequency range and accuracy of $CO_2$ concentration was about 3%. The system was applied to measure temperature and concentration in the combustion region of a premixed $CH_4$ +air triangular flame. The measurement results of gas temperature agreed well with thermocouple results. Many considerations were taken into account to reduce optical noise, etalon effect, beam steering and base line matching problem. The evaluations results and actual combustion measurement demonstrate the practical and applicability for in-situ and real time combustion monitoring in a practical system.

• Ocean Science Journal
• /
• 제40권2호
• /
• pp.79-89
• /
• 2005

Laboratory radiotracer experiments were conducted to determine assimilation efficiencies (AE) from ingested algal food and oxic sediment particles, uptake rates from the dissolved phase, and the efflux rates of Cd, Cr and Zn in the Asiatic clam Corbicula fluminea. Among three elements, AE from both algal and sediment food was greatest for Cd, followed by Zn and Cr. The AEs of tested elements from algal food (Phaeodactylum tricornutum) were consistently higher than those from sediments at a given salinity and temperature. The influence of salinity (0, 4 and 8 psu) and temperature (5, 13 and $21^{\circ}C$) on the metal AEs was not evident for most tested elements, except Cd AEs from sediment. The rate constant of metal uptake from the dissolved phase $(k_u)$ was greatest for Cd, followed by Zn and Cr in freshwater media. However, in saline water, the $(k_u)$ of Zn were greater than those of Cd. The influx rate of all tested metals increased with temperature. The efflux rate constant was greatest for Cr $(0.02\;d^{-1})$, followed by Zn $(0.010{\sim}0.017\;d^{-1})$ and $Cd\;(0.006\;d^{-1})$. The efflux rate constant for Zn in clam tissues depurated in 0 psu $(0.017\;d^{-1})$ was faster than that in 8 psu $(0.010\;d^{-1})$. Overall results showed that the variation of salinity and temperature in estuarine systems can considerably influence the metal bioaccumulation potential in the estuarine clam C. fluminea. The relatively high Cd accumulation capacity of C. fluminea characterized by the high AE, high dissolved influx rate and low efflux rate, suggested that this clam species can be used as an efficient biomonitor for the Cd contamination in freshwater and estuarine environments.

• Journal of Magnetics
• /
• 제17권2호
• /
• pp.86-95
• /
• 2012

This study investigated the effects of adding a third alloying element, Ni, to create $Fe_{70-x}Pd_{30}Ni_x$ (x = 2, 4, 6, 8 at.% Ni) ferromagnetic shape memory alloys (FSMAs). The Ni replaced a portion of the Fe. The $Fe_{70-x}Pd_{30}Ni_x$ alloys were homogenized through hot and cold forging to gain a ~38% reduction in thickness, next they were solution-treated (ST) with annealing recrystallization at $1100^{\circ}C$ for 8 h and quenched in ice brine, and then aged at $500^{\circ}C$ for 100 h. Investigation of the microstructures and magnetostriction indicated that the greater Ni amount in the $Fe_{70-x}Pd_{30}Ni_x$ alloys reduced saturation magnetostriction at room temperature (RT). It was also observed that it was more difficult to generate annealed recrystallization. However, with greater Ni addition into the $Fe_{70-x}Pd_{30}Ni_x$ (x = 6, 8 at.% Ni) alloys, the $L1_0+L1_m$ twin phase decomposition into stoichiometric $L1_0+L1_m+{\alpha}_{bct}$ structures was suppressed after the $500^{\circ}C$/100 h aging treatment. The result was that the $Fe_{70-x}Pd_{30}Ni_x$ (x = 6, 8 at.% Ni) alloys maintained a high magnetostriction and magnetostrictive susceptibility (${\Delta}{\lambda}{_\parallel}{^s}/{\Delta}H$) after the alloys were aged at $500^{\circ}C$ for 100 h. This magnetic property of the $Fe_{70-x}Pd_{30}Ni_x$ (x = 6, 8 at.% Ni) alloys make it suitable for application in a high temperature (T > $500^{\circ}C$) and high frequency environments.