• 한국해양학회지
• /
• v.26 no.3
• /
• pp.242-254
• /
• 1991

Southern sea of Korea was investigated for primary productivity during four scientific cruises of Korea Ocean research and Development Institute. Frontal structure appeared to be an important physical characteristic in enhancing the phytoplankton production in the study area. Relatively high productivity was occurred near the front between Tsushima Warm Current Water and Coastal Waters of China continent in March 1990 and in November 1989, and near the front between Tsushima Warm Current Water and Korean coastal Water in April 1989. In August 1988 high productive zone was limited to the tidal front off the southwestern coast of Korea. Nutrient supply related to the frontal structure might play a dominant role in increasing the primary productivity but mechanisms of nutrient enrichment are not clear. Average column productivity showed its maximum in April 1989 (1727 mgC/m$^2$/day). In the costal Waters of the china Continent incident light may be an important factor in regulating the regulating the phytoplankton production because of low light penetration rate resulting from high turbidity.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.3
• /
• pp.56-62
• /
• 2022

The tank engine clutch flange constitutes a tank on which the engine and transmission of the tank are mounted. The engine clutch flange is fabricated using a difficult-to-cut material that exhibits high strength and hardness. It is difficult to process and requires considerable processing expertise. In addition, the engine clutch flange for the tank requires high machining precision because it is a system in which the connection is detachable. Because it requires high processing precision, the measurement of products equally important as processing. However, productivity is low owing to the significant amount of time required to measure each product using a three-dimensional coordinate measuring machine. Hence, this study is conducted to improve the productivity of the female tank engine clutch flange. Dedicated hobs and jigs are designed and manufactured to convert the existing end-mill cutting processing into hobbing cutting processing. An engine clutch for the tanks is manufactured using the manufactured dedicated hob and jig, and the shortening time is verified by measuring the processing time. In addition, a jig for inspection is designed and manufactured to measure the precision of the product. To verify the inspected product, the product precision is measured using a contact-type three-dimensional coordinate measuring machine and a surface roughness measuring instrument. The study confirmed that the productivity of the engine clutch flange product for tanks can be improved by simplifying the process, reducing the processing time, and simplifying product inspection.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.45 no.1
• /
• pp.22-33
• /
• 2009

Ecological risk assessment(ERA), developed in Australia, can be used to estimate the risk of target, bycatch and protected species from the effects of fishing using limited data for stock assessment. In this study, we employed the ERA approach to estimate risks to tunas, billfishes, sharks, sea turtles and other species by the Korean tuna longline fishery in the Western and Central Pacific Ocean using productivity and susceptibility analyses of the ERA based on low(<1.30), medium(1.30-1.84) and high risk(>1.84). Albacore, bigeye, yellowfin, skipjack and bluefin tunas were generally evaluated in the medium risk. The susceptibility of tuna species, however, had higher risks than the productivity. Billfishes were also at medium risk, while sharks were at high risk by the tuna longline fishery. The risk of productivity was generally high, because most sharks caught by the tuna longline fishery have high longevities, i.e., over 10 years, including ovoviviparous species. Susceptibility, which is related with the selection of fishing gear, was also high, because the longline fishery has no gear modifications to prevent bycatch of protected species. Not only target tuna species were influenced by the tuna longline fishery in the Western and Central Pacific Ocean, but also nontarget species, such as pomfret, mackerels rays, sea turtle were done. Ecosystem-based fishery assessment tools, such as productivity and susceptibility analysis(PSA), have the ability to provide broad scientific advice to the policy makers and stakeholders.

• Journal of Ecology and Environment
• /
• v.32 no.4
• /
• pp.257-265
• /
• 2009

We estimated monthly and annual secondary productivity of pelagic zooplankton in Lake Paldang and Lake Cheongpyong. Secondary productivity was calculated by combining estimated zooplankton biomass and biomass-specific productivity for each site and depth from March to November 2008. In addition to somatic production, we measured production of eggs and exuviae for three dominant species: Daphnia galeata, Bosmina longirostris, Cyclops sp. In terms of biomass, B. longirostris was dominant in Lake Paldang in April and May, B. longirostris showed explosive biomass growth, especially in May. In June and July, B. longirostris and D. galeata were both dominant. Lake Cheongpyeong showed much lower zooplankton biomass than Lake Paldang. In August, there was little or no biomass in both lakes probably due to heavy rain. The Gyeongan River contributed most of the secondary productivity and B. longirostris contributed the most secondary productivity in Lake Paldang. D. galeata also contributed in the Gyeongan River, the South Han River and at the Paldang Dam in spring and fall. Overall, Lake Cheongpyeong showed lower secondary productivity than Lake Paldang. B. longirostris made the largest contribution to secondary productivity in the Cheongpyeong Dam area while D. galeata contributed the most near Nami Island. Somatic production constituted ~80% of the total secondary productivity (the sum of somatic, egg and exuvia production) for D. galeata and B. longirostris. Although production-to-biomass (P/B) ratios were usually <<1 B. longirostris sometimes showed very high P/B ratios, probably due to fish predation. D. galeata showed much lower P/B ratios than B. longirostris after the summer at most sites.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.4
• /
• pp.539-544
• /
• 2013

The effects of culture depth (2-10 cm) and cell density on the growth rate and biomass productivity of Chlorella sp. XQ-200419 were investigated through the use of a self-designed open circular pond photobioreactor-imitation system. With increases in culture depths from 2 to 10 cm, the growth rate decreased significantly from 1.08 /d to 0.39 /d. However, the biomass productivity only increased slightly from 8.41 to 11.22 $g/m^2/d$. The biomass productivity (11.08 $g/m^2/d$) achieved in 4 cm culture with an initial $OD_{540}$ of 0.95 was similar to that achieved in 10 cm culture with an initial $OD_{540}$ of 0.5. In addition, the duration of maximal areal productivity at a 4 cm depth was prolonged from 1 to 4 days, a finding that was also similar to that of the culture at a 10 cm depth. In both cases, the initial areal biomass densities were identical. Based on these results and previous studies, it can be concluded that the influence of culture depth and cell density on areal biomass productivity is actually due to different areal biomass densities. Under suitable conditions, there are a range of optimal biomass densities, and areal biomass productivity reaches its maximum when the biomass density is within these optimal ranges. Otherwise, biomass productivity will decrease. Therefore, a key factor for high biomass productivity is to maintain an optimal biomass density.

• Proceedings of the PSK Conference
• /
• 2002.10a
• /
• pp.338.1-338.1
• /
• 2002

The efficient Erythropoietin(EPO)-expression system in mammalian cells is required for massive production for therapeutic use. Ammonium ion is a major problem in the production of useful proteins by cultured animal cells and therefore it is of importance to devise a system by which a high productivity of human therapeutic recombinant protein can be maintained or enhanced under low ammonium concentration. (omitted)

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.4
• /
• pp.481-488
• /
• 2003

Insulin-like Growth Factors (IGFs) and IGF-binding protein act as intra-ovarian regulators that modulate the proliferation and differentiation of the granulosa and theca cells. Moreover, the IGF system is involved in metabolism by modulating the synthesis and degradation of glycogen and protein in animals. However the effect of the IGF system on egg productivity or body growth in KNOC has not been studied in depth. Therefore, this study was performed to investigate differences of serum IGFs and binding protein expressions between two groups showing high and low egg production or body weight and to elucidate the relationship of IGFs with egg productivity and body growth. KNOCs were divided into high and low groups depending on their egg productivity or body growth, and sera were collected every 10 wk from 20 till 60 wk. Serum IGF-I and -II concentration were measured by RIA using human and mouse antiserum and chicken standards. IGFBP was detected by Western ligand blotting. IGF-I concentrations were significantly greater in the high egg production group compared with those in the low egg production group (30 wk, p<0.01; 20 and 40 wk, p<0.05). Also, differences in IGF-II amounts between the two groups were detected at 60 wk (p<0.05). But IGFBPs in the low egg production group were more intense than that in the high egg production group through the egg laying period. The correlation between IGF-I concentration and number of egg production is significantly positive (20 wk, r=0.2729: p<0.05; 40 wk, r=0.3500: p<0.01), while IGF-II shows no correlation with egg productivity. In male KNOC, IGF-I and -II concentrations in the high body weight group are lower than that in the low body weight group. Body weight also shows a negative correlation with the serum IGF-II concentration in male chickens (20 wk, r=-0.5901: p<0.01). Consequently, we suggest that IGFs and binding protein are (in)directly involved in the egg productivity and body growth in KNOC.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.6
• /
• pp.38-48
• /
• 2013

Focusing on repetitive works of construction, many research have been conducted about application of the learning curve effect. However, it is still controversial, especially on the high-rise project, since the productivity improvement from the learning curve effects are hard to prove. In the previous research, applicability of the learning curve was mainly derived from the labor productivity data. Although the research were based on the real data, they merely concentrated on the simple conclusion that the labor productivity had improved or not, instead of the process interpretation. Therefore, the purpose of this research is to analyze the influence factors of the learning curve effect in high-rise projects and elucidate the offset factors of the effect. Based on these factors, a model for estimating the labor productivity containing the concept of process learning is suggested. Through our research, traditional learning curve theory could be compensated and re-established with having more appropriateness for high-rise projects.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.283-286
• /
• 2000

The effects of dissolved oxygen and pH on the cell growth and mass production of high-molecular weight pullulan by A. pullulans ATCC 42023 were evaluated. For the production of commercially useful pullulan with high-molecular weight, the influence of pH control on the pullulan production and growth of A. pullulans was studied in batch fermentation. It was found that the productivity of high-molecular weight pullulan with pH control at 6.5 was higher than that with no pH control. The influence of dissolved oxygen on the pullulan production and growth was studied. It was found that pullulan yield and synthesis rate increased with oxygen availability.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.283-284
• /
• 2012

High-rise building construction has been increasing for the recent years and the construction process has become more complicated. This suggests a need for precise planning based on reliable data to prevent cost overruns and delays. However, the process planning is implemented based mainly on the experience of engineers that can result in critical damage in cost and time. Accurate productivity estimation and unit cost analysis must be considered important matter to prevent such disaster. This study estimates productivity and unit cost of curtain wall operations in high-rise building construction by simulation techniques and statistical methodologies. This study suggests a decision making methodology for the site personnel that enables to compare various combinations of productivity and unit cost based on reliable data that has been collected in actual construction sites. It is expected that this study contributes to the following research of developing an optimized construction performance assembling model for the site personnel.