• 대한교통학회지
• /
• 제31권5호
• /
• pp.60-70
• /
• 2013

본 연구는 신호 교차로에서 대형 화물차의 정지로 인해 야기되는 온실가스 배출과 교차로 효율 저하를 완화하기 위해 좌회전 현시의 대형 화물차 대상 우선신호 알고리즘을 제안하고 효과를 분석한다. 대형 화물차의 진입 속도와 좌회전 속도를 고려한 녹색신호 연장 기법을 적용하며, 우선신호 제공으로 인해 발생할 수 있는 일반차량의 지체 증가를 완화하기 위해 두 가지 보상 전략을 수립하여 비교한다. 제안된 알고리즘의 효과를 분석하기 위해 PARAMICS를 이용한 시뮬레이션 분석을 수행하며 Comprehensive Modal Emissions Model (CMEM)을 이용하여 온실가스 배출량을 산정하였다. 실제 교통망의 3지 신호교차로를 대상으로 분석한 결과 비첨두시에는 대형 화물차에 능동적 보상 전략을 통해 지속적으로 우선권을 부여하는 것이 온실가스 및 연료소모량 감축에 효과가 있는 것으로 분석되었으며, 대형 화물차의 정지 감소로 인해 총통행시간도 개선되는 것으로 나타났다. 이러한 결과로부터 제안된 알고리즘은 교통량이 많지 않은 공단 입구의 좌회전 현시에 효과적으로 적용될 수 있을 것으로 판단된다.

• International Journal of Automotive Technology
• /
• 제6권3호
• /
• pp.221-227
• /
• 2005

Aim of this study is to investigate an aerodynamic effect of a drag-reducing device on a heavy-duty truck. The vehicle experiences two different kinds of aerodynamic forces such as drag and uplifting force (or downward force) as it is traveling straight forward at constant speed. The drag force on a vehicle may cause an increase of the rate of fuel consumption and driving instability. The rolling resistance of the vehicle may be increased as result of the negative uplifting or downward force on the vehicle. A device named roof-fairing system has been applied to examine the reduction of aerodynamic drag force on a heavy-duty truck. As for a engineering design information, the drag-reducing system should be studied theoretically and experimentally for the best efficiency of the device. Four different types of roof-fairing model were considered in this study to investigate the aerodynamic effect on a model truck. The drag and downward force generated by vehicle has been obtained from numerical calculation conducted in this study. The forces produced on four fairing models considered in this study has been compared each other to evaluate the best fairing model in terms of aerodynamic performance. The result shows that the roof-fairing mounted truck has bigger negative uplifting or downward force than that of non-mounted truck in all speed ranges, and drag force on roof-fairing mounted truck has smaller than that of non-mounted truck. The drag coefficient $(C_D)$ of the roof-fairing mounted truck (Model-3) is reduced up to $41.3\%$ than that of non-mounted trucks (Model-1). A downward force generated by a roof-fairing mounted on a truck is linearly proportional to the rolling resistance force. Therefore, the negative lifting force on a heavy-duty truck is another important factor in aerodynamic design parameter and should be considered in the design of a drag-reducing device of a tractor-trailer. According to the numerical result obtained from present study, the drag force produced by the model-3 has the smallest of all in all speed ranges and has reasonable downward force. The smaller drag force on model-3 with 2/3h in height may results of smallest thickness of boundary layer generated on the topside of the container and the lowest intensity of turbulent kinetic energy occurs at the rear side of the container.

• 한국자동차공학회논문집
• /
• 제14권2호
• /
• pp.194-201
• /
• 2006

Roof-fairing and deflector system have been used on heavy-duty trucks to minimize aerodynamic drag force not only for driving stability of the truck but also for energy saving by reducing the required driving power of the vehicle. In this study, a numerical simulation was carried out to see aerodynamic effect of the drag reducing device on the model vehicle. Drag and lift force generated on the five different models of the drag reducing system were calculated and compared them each other to see which type of device is efficient on the reduction of driving power of the vehicles quantitatively. An experiment has been done to see airflow characteristics on the model vehicles. Airflow patterns around the model vehicles were visualized by smoke generation method to compare the complexity of airflow around drag reducing device. From the results, the deflector systems(Model 5,6) were revealed as a better device for reduction of aerodynamic drag than the roof-fairing systems(Model 2,3,4) on the heavy-duty truck and it can be expected that over 10% of brake power of an engine can be saved on a tractor-trailer by the aerodynamic drag reducing device at normal speed range($80km/h{\sim}$).

• 한국수소및신에너지학회논문집
• /
• 제35권2호
• /
• pp.121-128
• /
• 2024

In this study, a dynamic simulation model of a heavy-duty truck, equipped with a fuel cell power-train, has been developed and the dynamic behavior of the fuel cell stack has bee investigated using. Output change simulations were performed according to several drive cycle load change of a fuel cell truck. Mathworks' Simulink and Simscape program were used to develop the model. The model is comprised of fuel cell power train, power converter system and truck vehicle part. The vehicle runs at targeted speed of the truck, which is set as the load of the system. The dynamic behavior of the fuel cell stack according to the weight difference were analyzed, and based on this, the dynamic characteristics of the fuel cell output power and battery state with simple load was analyzed.

• 한국수소및신에너지학회논문집
• /
• 제32권4호
• /
• pp.236-244
• /
• 2021

Fuel cell systems for medium duty truck require high power demands under driving. Since high power demands results in significant heat generation, thermal management is crucial for the performance and durability of medium duty truck. Therefore, various configurations of dual stacks with cooling systems are investigated to understand appropriate thermal management conditions. The simulation model consists of a dynamic fuel cell stack model, a cooling system model equipped with a controller, and the mounted controller applies a feedback controller to control the operating temperature. Also, In order to minimize parasitic power, the comparison of the cooling systems involved in the arrangement was divided into three case. As a result, this study compares the reaction of fuel cells to the placement of the cooling system under a variety of load conditions to find the best placement method.

• International Journal of Advanced Culture Technology
• /
• 제6권3호
• /
• pp.105-116
• /
• 2018

As an international company in the automotive industry for years, Sichuan Hyundai has encountered serious difficulties since its entering into China. With huge investment and great ambition to conquer the China commercial vehicle market, successive setbacks have put the company in jeopardy. Design thinking, emphasizing "user-driven innovation" can help to look for effective and possible solutions from a very strong and effective perspective. This thesis first provides a comprehensive look of the economic background of China in order to get a overall understanding of the market. Then the paper did an analysis of Sichuan Hyundai from the perspective of design thinking. By identifying the reliability bias of Sichuan Hyundai, key problems such as the product, advertisement and cultural communication were discussed. With a emphasis on the intuitive thinking, the paper provides some feasible solutions and also implications for the future development.

• 한국정밀공학회지
• /
• 제13권3호
• /
• pp.132-140
• /
• 1996

This paper developes a torsional vibration model of heavy duty truck drive line for simulation of a driving rattle, which causes very annoying noise to driver at the full load driving condition. Test results show a peak in the fit plots at the frequency of the 2nd harmonics of propeller shaft revolution. A 10 d.o.f. lumped parameter nonlinear torsional vibration model is constructed and engine torque variation is calculated from P- .theta. diagram. Time responses are simulated and compared with the test results, which show fairly good agreement. The effects of paramenter change are investigated, and the optimum configuration is proposed.

• 한국분무공학회지
• /
• 제23권2호
• /
• pp.74-80
• /
• 2018

Emission characteristics of regulated pollutants (CO, NOx, HC and PM) and hazardous air pollutants (HAPs) from diesel heavy duty trucks equipped with EGR+pDPF and SCR for Euro 5 emission standards were investigated using a chassis dynamometer. In the case of regulated pollutants, diesel heavy duty trucks with EGR+pDPF emitted 79% less CO than those with SCR. Also, those with the SCR emitted 36% less NOx than those with the EGR+pDPF. The results of VOCs have show that alkanes emissions for heavy duty trucks with the EGR+pDPF and the SCR have been higher than alkenes, cycloalkanes and aromatics. In the case of individual VOCs, the highest of propene emissions for 11.3~16.1% occupied. For aromatics group, benzene emissions are the highest percentage for 4.4~15.5%. In the future, the results of present study will provide basic data to set up HAPs emissions inventory for mobile source.

• 한국가스학회지
• /
• 제15권1호
• /
• pp.9-14
• /
• 2011

대형 디젤엔진은 주행거리가 길고 배기량이 크기 때문에 차량의 대수는 상대적으로 적지만 대기환경에 미치는 영향은 크다. 시내를 주행하는 시내버스의 경우 한일 월드컵을 계기로 CNG 버스로 전환되었다. 그러나 대형트럭과 장거리 시외버스의 경우 주행거리가 길고 CNG 충전소가 대도시의 시내버스 차고지 위주로 설치되어 있어 이용이 불가능하였다. 단열용기의 적용으로 천연가스를 압축상태가 아닌 액체 상태로 보관이 가능해져 주행거리가 긴 대형트럭이나 장거리 시외버스로의 적용이 가능해졌으며, 혼소엔진의 경우 LNG 충전이 어려운 지역에서는 디젤로 운행이 가능하다. 이와 같은 장점으로 인하여 석유 의존도를 크게 낮출 수 있어 에너지원의 다변화가 가능하며, 디젤차의 고질적인 단점으로 여겨왔던 매연 및 질소산화물뿐만 아니라 저탄소 연료를 사용함으로서 대표적인 온실가스중의 하나인 이산화탄소도 10%이상 저감할 수 있었다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.304-309
• /
• 1998

In recent truck industry, ride quality improvement as well as payload capacity is a very important subject. In order to achieve this goal, it is necessary to study several sub-systems (powertrain, suspension, engine mount, exhaust, etc) of truck which are major components of vehicle. In this research, torsional vibration reduction method of 4$\times$2 truck powertrain is demonstrated by using computer simulation and experiment. First, truck powertrain is modeled as a vibration system and validity of developed model is verified by comparing free vibration results with experiment results. Second, Most key parameters which influence torsional resonance are examined utilizing mode analysis. Finally, frequency responses of truck powertrain are obtained and reduction counterplans of torsional vibration are suggested.