• Journal of the Semiconductor & Display Technology
• /
• 제19권3호
• /
• pp.30-35
• /
• 2020

A microlens has been fabricated by various methods such as a thermal reflow, hot embossing, diamond milling, etc. However, these methods require a relatively complex process to control the microlens shape. In this work, we report on a simple and cost-effective method to fabricate a cylindrical microlens (CML), which can diffuse light widely. We have employed a slot-die head with the dual plate (a meniscus guide with a protruded μ-tip and a shim with a slit channel) for coating of a narrow stripe using poly(methyl methacrylate) (PMMA). We have shown that the higher the coating gap, the lower the maximum coating speed, which causes an increase in the stripe width and thickness. The coated PMMA stripe has the concave shape. To make it in the shape of a convex microlens, we have applied the thermal reflow method. When the stripe thickness is small, however, its effect is negligible. To increase the stripe thickness, we have increased the number of repeated coating. With this scheme, we have fabricated the CML with the width of 223 ㎛ and the thickness of 7.3 ㎛. Finally, we have demonstrated experimentally that the CML can diffuse light widely, a feature demanded for light extraction efficiency of organic light-emitting diodes (OLEDs) and suppression of moiré patterns in displays.

• International Journal of Fluid Machinery and Systems
• /
• 제4권1호
• /
• pp.14-24
• /
• 2011

In this paper, design optimization for mixed-flow pump impellers and diffusers has been studied using a commercial computational fluid dynamics (CFD) code and DOE (design of experiments). We also discussed how to improve the performance of the mixed-flow pump by designing the impeller and diffuser. Geometric design variables were defined by the vane plane development, which indicates the blade-angle distributions and length of the impeller and diffusers. The vane plane development was controlled using the blade-angle in a fixed meridional shape. First, the design optimization of the defined impeller geometric variables was achieved, and then the flow characteristics were analyzed in the point of incidence angle at the diffuser leading edge for the optimized impeller. Next, design optimizations of the defined diffuser shape variables were performed. The importance of the geometric design variables was analyzed using $2^k$ factorial designs, and the design optimization of the geometric variables was determined using the response surface method (RSM). The objective functions were defined as the total head and the total efficiency at the design flow rate. Based on the comparison of CFD results between the optimized pump and base design models, the reason for the performance improvement was discussed.

• Journal of the Korean Society of Clothing and Textiles
• /
• 제6권1호
• /
• pp.51-59
• /
• 1982

Growth is marked by changes in body shape as well as in body size. Increase in size is described quantitatively by increments over time : changes in shape are complex and perhaps are not possible to quantify satisfactorily. Simply to define or describe static body shape quantitatively is difficult, and traditionally simple ratios or indices have been used. In order to find out the body proportion and the body type of the Korean males and females from 6 to 24 years, the material of measurements obtained by the Korean Body-build Investigations (measured in 1979) was calculated and analyzed. The results are as follows: 1. The growth of the trunk part of the body precedes that of the lower part. Comparing the growth rate of male and female, the latter is higher than the former, especially in 12. 2. When a comparison is made between 6, 9, 12, 15 years and grown-ups(20$\~$24 years) with their respective stature's taken as 100, then values of these children are larger in the measurements related with head, acromial and waist height but smaller in lower extremities than these of the grown-ups. 3. Body proportion changes gradually from infant to adult body type indicating different phases each sex.

• Journal of the Korean Society of Clothing and Textiles
• /
• 제29권2호
• /
• pp.367-378
• /
• 2005

The purpose of this study was to analyse craniofacial shape by 3D scanner for female adults with age groups. In this study, heads of 452 female adults were measured by 3D scanner. The obtained 25 measurements were analyzed by statistical methods. The results can be summarized as follows; 1. From the basic statistical data analysis, vertex-tragion and the length between the pupils were the longest in their twenties, and grew shorter in elderly groups. The length of nasion-subnasale and the width of mouth increased with an increased in age. 2. According to the analysis of the craniofacial proportions, the head type of female aduls was short-headed. The size of lower face increased with an increase in age. 3. The statistically noticeable differences were found in the measurement of the left and the right sides of face in the age groups of 20, 30, and 40. 4. High correlations were found in two perpendicular lengths, two horizontal lengths and two widths. 5. The order of factor analysis was as follows; the horizontal length, the perpendicular length and the width from highest.

• Proceedings of the Korean Geotechical Society Conference
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.405-416
• /
• 2005

The rubblization technique is breaking the aged concrete pavement slab into rubblized concrete aggregate, and use it as an base material at its original position, then builds overlay above the rubblized base. This method has been successively used in USA due to the advantage of good contructibility, cost-effectiveness as well as the capability of preventing of reflection cracks. However, constructibility and economic performance of rubblization on typical Korean concrete pavements needed to be investigate since to typical Korean concrete pavements have thick slab, as well include lean concrete subbase course. This stud explored optimum breaking depth and suggested minimum 10cm based on reflection crack simulation test. Also proper head shape and impact energy were investigated based on small breaking field tests. It was found that $127kg/cm^2$ of stress with 52.3% of head contact area are breaking requirement. Also, Multi-head type breaker suitable for Korean condition was designed and developed. This multi-head type breaker was designed to rubblize old concrete to the suggested optimum rubblized-depth and rubblized-concrete-aggregate size to prevent reflection crack and maintain high bearing capacity. This machine was used for the test of rubblization of old concrete pavement on a non-use old concrete and a in-serviced road. In these two tests, engineering properties of rubblized base and constructability and cost were investigated. In both tests, the old concrete rubblized to targeted size and depth, and high-level bearing capacity was achieved. Also, superior constructability and lower cost compared with traditional reconstruction was examined.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제34권8호
• /
• pp.1035-1044
• /
• 2010

Head-related transfer function (HRTF) is an acoustic transfer function from a sound source to the ear canal entrance position. HRTFs are very important information in the construction of virtual sound fields. HRTFs also vary for different individuals. In this study, characteristics of HRTF for an average Korean are investigated numerically by comparing with the HRTF for a standard Knowles Electronics Manikin for Acoustic Research (KEMAR). A boundary element (BE) model for an adult Korean is developed using the computerized tomography (CT) data in order to investigate the variation in HRTFs for different individuals. The boundary conditions of the BE model are identified by comparing the numerical results with the experimental results. The numerical model shows that accurate HRTFs can be calculated efficiently over full audible frequency range for individuals.

• Clinical and Experimental Reproductive Medicine
• /
• 제21권2호
• /
• pp.149-156
• /
• 1994

Failure of in vitro fertilization may occur even though oocyte and semen parameters seem satisfactory. Quantified ultrastructural study of spermatozoa was performed in three cases of failed in vitro fertilization. The results were compared to those of four fertile men. Quantification was achieved by cataloguing cell defects of the spermatozoon heads and mid/principal pieces of the flagella. Using the data from each specimen, the percentages of total cellular abnormalities in the head/mid/principal pieces were established. The percentages of anomalies of the midpiece and of the principal piece were not significantly different between failed cases and controls. The percentage of cell alterations of the head (96-100 vs 75${\pm}$3,4%), the percentage of combined anomalies of the head (80-86 vs 52.5${\pm}$1.9%), and the percentages of nuclear shape deformation (68-86 vs 47.5${\pm}$6.3%), acrosomal defects (86-96 vs 50${\pm}$4.3%), and postacrosomal sheath defects (78-88 vs 44.5${\pm}$7.2%) of the head were significantly different between failed cases and controls. Due to the cost and time involved in processing semen samples for electron microscopy, the widespread application of this technique to all couples presenting for IVF certainly is not warranted. However, in selected instances electron microscopy may play a crucial role in identifying an occult male factor.

• Journal of Fashion Business
• /
• 제9권5호
• /
• pp.15-36
• /
• 2005

The purpose of this study was to provide for the useful fundamental data by developing an appearl sizing system according to body types for Chinese adult female. Thus, it was to improve of fittness and coverage rate of exporting domestic clothing to China. As a sample, 1360 female women was seleted aged between 19 and 50 who resident in Beijing and Shanghai in China for characterization body types and development of apparel sizing system by classifying them. As for the method of this study was made of 111 items by indirect measures done during Jun. 23 $\sim$ Aug. 7, 2004. Data analysis were processed by SPSS WIN 10.0 Program was used to for technical statistical analysis, ANOVA(t-test and F-test), factor analysis, duncan's multiple test. The results from the study were as follows: As they are getting older, the horizontal size and length categories related to width, thickness, and circumference increased, and the height and vertical size that show the vertical size of body reduced. 1. The women in the Shanghai area had large head width, head thickness and head circumference, the categories related to the height and head, and the women in the Beijing area had larger in terms of width, circumference, length, angle and other categories. 2. Chinese Adult women's constitutional components determined by factor analysis, six components could be identified: factor 1 : constitutional obesty and width size, factor 2 : longistudinal body size, factor 3 : shoulder form and size, factor 4 : longistudinal upper body size, factor 5 : longistudinal under body size, factor 6 : shoulder dropping.

• Fisheries and Aquatic Sciences
• /
• 제21권12호
• /
• pp.37.1-37.10
• /
• 2018

The larvae and juveniles of Porocottus leptosomus belonging to the family Cottidae were collected (n = 95, 3.9-16.5 mm in body length, BL) from Busan, Korea, in March 2015. The larvae and juvenile were identified using DNA barcoding as P. leptosomus, and their morphological description was presented in detail. The yolk-sac larvae (3.9-5.6 mm BL) body was slightly compressed, the head was large, the eye was round and large, and the anus was before the middle of the body. The preflexion larvae (5.2-10.0 mm BL) body length drastically increased; caudal fin rays began to occur. The flexion larvae (9.4-11.8 mm BL) notochord flexion started; dorsal, pectoral, and anal fin rays began to occur; pelvic fin buds are seen; they possessed a pair of parietal spine; and a pair of supraocular cirri was first to develop. At 12 mm BL, the notochord was completely flexed. The larva stage (3.9-12.6 mm SL) had the stellate melanophores in the head, isthmus, gut, and tail (along to the ventral midline). During the juvenile stage (11.4-16.5 mm BL), melanophores covered the head and began to form five black bands on the side of the body. The larvae of P. leptosomus spent pelagic life, but moved to the bottom during the juvenile stage. The larvae and juveniles of P. leptosomus differ from other cottid larval fishes by body shape, melanophore head pattern, and spine development. P. leptosomus can be distinguished from Porocottus allisi by morphological development and the occurrence of larval fish: preopercular spine development, melanophore pattern, and caudal fin development.

• Korean Journal of Head & Neck Oncology
• /
• 제39권1호
• /
• pp.45-48
• /
• 2023

Angiosarcoma is a very rare subtype of sarcoma. It mainly occurs in the head and neck, and cutaneous angiosarcoma in this region seems to be a distinctive neoplasm with characteristic clinicopathologic features that differ from those of angiosarcoma in other anatomical locations. The prognosis of angiosarcoma in the head and neck region is poor, and the risk of local recurrence and metastasis is high. We reconstructed an atypical angiosarcoma that presented as a solitary nodule with a shape suggestive of hemangioma on the cheek using a modified bilobed local flap. At a 12-month follow-up visit, the patient in this case showed successful recovery after radiation therapy.