• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.141-150
• /
• 2000

In this study liquefaction hazard potential was assessed by modified Seed and Idriss method and maps of liquefaction hazard potential utilized by LPI(Liquefaction Potential Index) and FE(Equivalent Liquefaction Factor of Safety) were constructed in two dimensional space, Comparisons of liquefaction hazard maps assessed by LPI and FE are represented to verify the FE method proposed in this study. Based on the results of comparing liquefaction hazard map using LPI and FE there is similar distribution trend of zonation indices. from the result of comparison of liquefaction hazard maps of FE base using Hachinohe and ofunato PGA(Peak ground Acceleration) data at one site of port and harbor in Korea the values of FE in liquefaction hazard map using Hachinohe data are underestimated. And in the view of quantitative analysis FE is more convenient than LPI because types of results from FE are factor of safety that widely used in geotechnical practice and aseismic design standard for port and harbor in Korea.

• Nuclear Engineering and Technology
• /
• 제34권6호
• /
• pp.586-595
• /
• 2002

The Seismic probabilistic risk assessment (SPRA) or seismic margin assessment (SMA) have been used for the seismic safety evaluation of nuclear power plant structures and equipments. For the SPRA or SMA, the reference response spectrum should be defined. The site-specific median spectrum has been generally used for the seismic fragility analysis of structures and equipments in a Korean nuclear power plant Since the site-specific spectrum has been developed based on the peak ground motion parameter, the site-specific response spectrum does not represent the same probability of exceedance over the entire frequency range of interest. The uniform hazard spectrum is more appropriate to be used in seismic probabilistic risk assessment than the site- specific spectrum. A method for modifying the seismic fragility parameters that are calculated based on the site-specific median spectrum is described. This simple method was developed to incorporate the effects of the uniform hazard spectrum. The seismic fragility parameters of typical NPP components are modified using the uniform hazard spectrum. The modification factor is used to modify the original fragility parameters. An example uniform hazard spectrum is developed using the available seismic hazard data for the Korean nuclear power plant (NPP) site. This uniform hazard spectrum is used for the modification of fragility parameters.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.165-172
• /
• 2002

We presents an hazard zonation mapping technique in karst terrain and its assessment. From the detailed engineering geological mapping. Controlling factors of sink hole and limestone cave formation were discussed and 4 main hazard factors affecting hazard potential are identified as follows: prerequisite hazard factor(distributions of pre-existing sink holes and cavities), geomorphological hazard factors(slope gradient, vegetation, and drainage pattern etc.) geological hazard factors(lithology, fracture patterns and geological structures etc.) and hydraulic conditions(hydraulic head, annual fluctuation of ground water table and composition of g/w water). From the construction of hazard zonation map along the Jecheon-Maepo area, and vertical cross-sectional hazard zonations specific tunnel site we suggest hazard zonation rating systems.

• 품질경영학회지
• /
• 제31권3호
• /
• pp.193-204
• /
• 2003

In this paper, we consider a periodic preventive maintenance(PM) policy in which each PM reduces the hazard rate but remains the pattern of hazard rate unchanged. And the system undergoes only minimal repairs at failures between PM's. The expected cost rate per unit time is obtained. The optimal number N of PM and the optimal period x, which minimize the expected cost rate per unit time are discussed. Explicit solutions for the optimal periodic PM are given for the Weibull distribution case.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.509-516
• /
• 2001

As the first step for the application of seismic landslide hazard maps to domestic cases, two types of hazard maps on Ul-joo from pseudostatic analysis and Newmark sliding block analysis are constructed and comllared. Arcview, the GIS program and the 1:5,000 digital maps of the test-site are used for the construction of hazard maps and tile parameters for the analyses are determined by seismic survey and laboratory tests. The results from the pseudostatic analysis have more conservative values of lower critical slope angles, although the results from the two different analyses have similar tendencies. In detail, with increasing the peak ground acceleration, the difference between the two analyses in the critical slope angle increases, while the difference decreases with increasing the maximum soil depth.

• 한국산학기술학회논문지
• /
• 제13권7호
• /
• pp.3244-3251
• /
• 2012

대형 해양구조물의 건설과 운영에서 중요한 항목 중의 하나가 재해위험도를 분석하고 평가하는 것이다. 이에 본 연구에서는 수중터널의 건설과 운영 시에 발생할 수 있는 재해 위험요소를 도출하고 퍼지 AHP(Analytic Hierarchy Process) 방법으로 이러한 위험요소의 수준을 파악하고자 하였다. 재해 위험도로는 자연재해 위험도와 인적재해 위험도로 구분하고 이러한 위험도 항목들이 수중터널에 미치는 영향을 전문가 설문을 통하여 조사하였다. 조사된 전문가 설문결과 데이터를 퍼지 AHP 기법으로 분석하여 재해위험도를 각 위험요소별로 정량화하였다. 또한, 수중 터널과 교량, 해저터널, 침매터널의 재해위험도 수준을 분석하여 수중터널이 가지고 있는 고유의 재해위험도 수준을 평가하였다. 재해위험도에서는 쯔나미와 지진이 가장 위험도 인식수준이 높았고, 인적재해 위험도는 화재와 폭발의 위험도 인식이 높은 수준이었다. 또한, 수중터널은 침매터널에 비해서는 1.4배, 교량에 비해서는 3.2배 위험도 인식수준이 높은 것으로 조사되었다.

• Spatial Information Research
• /
• 제17권3호
• /
• pp.261-268
• /
• 2009

본 연구는 전국 토양유실분포도와 토양유실위험 등급도를 작성하는 것을 목적으로 하였다. 토양유실분포도는 RUSLE를 이용하였고, 강우-유출 침식성인자(R)는 기상청의 59개 기상관측소의 1977년부터 2006년까지 (30년간)의 강우량 자료를 이용하여 산정하였다. 빈도분석은 FARD를 이용하였고, 전국 R인자를 빈도별로 산정하였다. 전국 R인자 분석에서 낙동강 유역이 가장 작은 값을 한강유역이 큰 값을 갖는 것으로 분석되었다. 토양유실량 분석결과 토지피복별로 초지, 나지 밭의 크기 순서로 토양유실이 발생하고, 전체적으로 약17.2ton/ha 정도의 토양유실이 발생하는 것으로 분석되었다. 단위면적당 평균토양유실량은 나지와 초지에서 많은 토양유실이 발생하고 있다. 5년빈도 강우특성에서 전체 토양유실량은 15,000여 톤의 토양유실이 발생하는 것으로 나타났다. 토지피복별 면적비를 고려하면 논, 산림, 밭작물 재배지역에서 많은 토양유실이 발생하는 것으로 분석되었다. 토양유실 위험 등급도 작성은 토양유실위험 등급을 5개 등급으로 구분하여 수행하였다. 분석결과 토양유실위험 2등급인 보통지역이 전체 토양유실량 위험지역의 78.2%로 가장 많은 부분을 차지하고 있으며, 심각한 토양유실 위험지역은 분석지역 전체 중에서 약 1.1%인 $1,038km^2$정도인 것으로 분석되었다. 토지피복별로 심각한 토양유실 위험지역은 나지, 초지, 밭작물 재배지역의 순으로 각각 $93.5km^2$, $168.1km^2$, $327.4km^2$ 정도가 심각한 등급의 토양유실 위험지역으로 분석되었다.

• 디지털산업정보학회논문지
• /
• 제8권2호
• /
• pp.1-10
• /
• 2012

In this study, software products developed in the course of testing, software managers in the process of testing software test and test tools for effective learning effects perspective has been studied using the NHPP software. The finite failure nonhomogeneous Poisson process models presented and the life distribution applied exponential and log shaped type hazard function. Software error detection techniques known in advance, but influencing factors for considering the errors found automatically and learning factors, by prior experience, to find precisely the error factor setting up the testing manager are presented comparing the problem. As a result, the learning factor is greater than autonomous errors-detected factor that is generally efficient model could be confirmed. This paper, a failure data analysis of applying using time between failures and parameter estimation using maximum likelihood estimation method, after the efficiency of the data through trend analysis model selection were efficient using the mean square error and coefficient of determination.

• 한국방재학회 논문집
• /
• 제6권3호
• /
• pp.1-8
• /
• 2006

지진 지역계수는 역사지진과 계기지진의 기록을 기초로 한 지진의 지역성이 고려된 지역적 지진특성을 고려하여 평가되어진다. 본 연구는 국내 지진자료의 분석을 통해 지역별 지진발생 특성을 정리하고 국내의 지진환경 특성을 검토하여 지진지역 계수 설정을 위한 기초 자료의 제공을 목적으로 한다. 이 연구를 통해 역사지진과 계기지진에 각각의 특성을 정리하였고 이를 비교하여 우리나라의 지진발생 특성에 대한 기초 자료를 얻을 수 있었다.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.458-464
• /
• 2022

Hazard recognition is considered as one of the pre-requisites for effective hazard management and injury prevention. However, in complex and changing environments, construction workers are often unable to identify all possible hazards that can occur in the jobsite. Therefore, identification of factors that impact hazard recognition in the work environment is necessary to reduce safety incidents as well as to develop strategies that can improve worker's hazard recognition performance. This study identified factors/problems that impact worker's hazard recognition abilities and suggested some potential technologies that can mitigate such problems. Literature reviews of journal articles and published reports related to hazard recognition studies were conducted to identify the factors. The study found out that the major factor responsible for affecting worker's hazard recognition abilities were human-related. Industry factors, Organizational factors and Physical factors of the site were the other factors identified from the study that impact worker's hazard recognition performances. The findings from the study can help site personnel recognize areas where effective measures can be directed towards worksite safety of workers while working in complex construction environments.