• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.62 no.3
• /
• pp.145-150
• /
• 2013

A novel AC to DC PWM converters with unity input power factor are proposed to overcome the above shortcoming. The main function of these converters is to shape the input line current to force it exactly in phase with the input AC voltage. Therefore, the input power factor can be improved to near unity and the input current harmonics can be eliminated. In this paper, half-bridge converter with two active switches and two diodes are utilized for low-cost type UPS configuration. By having only two semiconductors in the current path at any time, losses can be reduced over the conventional boost topology. Also, this converter provides controllable dc-link voltage, high power factor, and low cost type converter by simple power circuits. Simulation results show that the proposed half-bridge converter/inverter control technique can be applied to single-phase low-cost type UPS systems successfully.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1117-1119
• /
• 2002

In this paper, we have developed a ZVS half-bridge converter with a clamping circuit for the DC power source of PDP circuit. The clamping circuit in the developed converter reduces the oscillating current of the switch by resonant inductor and parasitic parameters in output rectifier diodes. Finally, comparing the experimental results of the developed converter to the conventional ZVS half-bridge converter, it is clarified that the developed converter is more efficient and lower noise than the conventional one.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.514-516
• /
• 2008

A new four level half-bridge converter is proposed in this paper. Compared to a conventional half-bridge converter and an asymmetric half-bridge converter, the proposed converter has less stress on power switching components and have smaller output inductor. Zero-voltage-switching condition is also achieved with the proposed converter. The operational principle, DC conversion ratio and ZVS analysis are presented. Experimental results are demonstrated to verify the feasibility and advantages of the new topologies.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.289-291
• /
• 2005

In this paper results of the experiment which used LLC resonant half bridge DC-DC converter to a portable electrical equipment. LLC resonance Half Bridge DC-DC converter which was used in this experiment improved an efficiency because it reduced switching, conduction losses and with synchronous rectifier. As a result of the experiment, this proposed converter could verified an increase of 2% to the efficiency more than diode rectifier.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.147-149
• /
• 2007

A new half bridge converter without DC offset of magnetizing current is proposed. The proposed half bridge converter can realize no DC offset of magnetizing current as well as no circulating current, and guarantee ZVS operation. Therefore it has high efficiency and high power density, especially in wide input range. The operational principle, DC conversion ratio and ZVS analysis are presented. Experimental results demonstrate that the proposed converter can achieve a significant improvement in the efficiency.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1392-1394
• /
• 2005

In this paper results of the experiment which used LLC resonant Half Bridge DC-DC converter to a portable electrical equipment. LLC resonant Half Bridge DC-DC converter which was used in this experiment improved an efficiency because it reduced switching, conduction losses and with synchronous rectifier. As a result of the experiment, this proposed converter could verified an increase of 2% to the efficiency more than diode rectifier.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.150-152
• /
• 1998

ZVS Half-Bridge converter is proposed. This converter is operating in fixed switching frequency to regulate output voltage. The ZVS is maintained by Partial resonance during the OFF interval of both switches. Using self-driven synchronous rectifier, this circuit minimizes the Power loss in the rectification circuit. 50[W] ZVS Half-Bridge converter is simulated and built. Two results has been compared.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.516-518
• /
• 1994

A new class of zero-voltage switching (ZVS) pulse width modulated (PWM) half-bridge converter is investigated. The new converter is capable of switching zero voltage and keeping advantages of quasi-resonant half-bridge converter while maintaining constant frequency operation. The theoretical analysis of a ZVS PWM half bridge converter is presented and is verified by PSPICE simulation results.

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.169-172
• /
• 2004

This paper presents the Asymmetric Half-Bridge converter using current-doubler rectifier. Resonant conditions of the asymmetrical soft switching Half-Bridge converter is analyzed. Current-doubler converter has small voltage and current ripple. The comparison of topology compared to the secondary rectification for center-tap type and current-doubler type are discussed. Experimental result are obtained on a 5V, 20A DC/DC Half-Bridge converter MOSFET based prototype for the 100W.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.128-130
• /
• 2005

본 논문은 ZVS asymmetrical half-bridge converter 에서 무부하시 전력소모 분석과 감소 방안에 대한 연구이다. Asymmetrical half-bridge converter는 영전압 스위칭을 통해 효율 증가가 가능하고, 낮은 EMI 발생의 장점으로 인해 최근 많이 사용되고 있다. 그러나 최근 이슈가 되고 있는 대기전력 소모의 관점에서는 기존의 hard switching converter에 비해 오히려 손실이 증가한다. 이는 공진형 컨버터의 무부하시 동작이 기생전류에 의한 도통손실이 크기 때문이다. 따라서 본 논문에서는 이를 개선 할 수 있는 방법을 제시하고 70W급의 실험용 SMPS의 제작을 통해 제안된 방법의 타당성을 검증한다.