• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.518-518
• /
• 2008

We propose an optical-based measuring instrument of catenary system in electric railway. This system was made to utilize line scan camera as inspecting system to measure the stagger and height of overhead contact wire in railway and composed with optical type source and FPGA-based image acquisition system with PCI slot. Vision acquisition software has been used for the application to programming interface for image acquisition, display, and storage with a frequency of sampling. The proposed optical-based measuring instrument to measure the contact wire geometry shows promising on-field applications for online condition motoring. Also, this system can be applied to measure the hight and stagger or other geometry of different type of overhead catenary system.

• KIEAE Journal
• /
• v.3 no.3
• /
• pp.19-25
• /
• 2003

The Address No.0 of Eco-friendly Architecture offers unique experience for those who visit the place to envisage the future architecture where nature, human and building exist in harmony. It is open to the general public including the students of elementary and secondary schools. This house has been built to provide opportunities for the general public to experience eco-friendly architecture. It's floor area is 42 pyung($140m^2$) and the overall site has the area of 180 pyung($600m^2$). The following illustrates some of its prominent features : ${\bullet}$ Remodeling of a traditional Korean residence ${\bullet}$ Application of passive solar systems ${\bullet}$ Use of clerestory windows and daylighting systems(washroom and machine room) ${\bullet}$ Operation of solar water heaters with flat plate collectors ${\bullet}$ Construction of Biotop(small ecological world) ${\bullet}$ Water circulation for Biotop by photovoltaic(150W) and wind power(400W) generation ${\bullet}$ Outdoor hot water supplied by all-glass evacuated solar tubes. Through this Address No.0 of Eco-friendly Architeture conclusions are as followings. 1. The array of tubes in collector has the best nice in that the number of tube is nine and the tilt angle is the latitude $+20^{\circ}$. 2. The thermal performance of the all-glass solar vacuum collector was excellent than of the flate-plate solar collector. 3. The adaption of new small wind power systems to buildings were proved to produce a profit if it is considered the expense of environment improvement and the wind speed increasing according to rise of building hight.

• Korean Journal of Plant Resources
• /
• v.18 no.2
• /
• pp.279-284
• /
• 2005

The study was conducted to investigate the correlation and regression analysis between the factors - diameter, hight and crown width - and collection amount of Rhus lacquer by the sex of Rhus verniciflua. The relationship between the diameter and the collection amount of the lacquer by the sex of the lacquer tree indicated that, for both of the male and the female, the lacquer amount was likely to increase as the diameter got larger. In general, the male trees tended towards the higher amount of the lacquer than the female. The relationship between the crown width and the collection amount of the lacquer by the sex showed little difference. As the crown became wider, however, the lacquer amount showed the increasing trend. The regression analysis by the sex of the tree indicated that the major factors of the female had larger influence on the lacquer amount than those of the male. The no differences of statistical significance were found among the diameter, the height, the crown width, and the lacquer amount.

• Fire Science and Engineering
• /
• v.28 no.5
• /
• pp.44-51
• /
• 2014

In this study, the Mock-up office space experiments have been performed for the fire behavior analysis of the compartmented space used for the performance-based fire safety design of buildings. Mock-up test was conducted using the compartmented office space dimensions, which are 2.4 m wide, 3.6 m wide, and 2.4 m hight. Test was conducted with the combustible materials such as a desk, a chair, a computer ect. The fire load in the Mock-up office space was $18.74kg/m^2$. As a result, the temperature of the central compartment space to reach $600^{\circ}C$ were 394 to 408 s. The temperature of the corner near the entrance edge to reach $600^{\circ}C$ were 404 to 420 s. At this study, the temperature curve in the compartmented space has been predicted using the temperature data appling the BFD curve. The BFD curve factor based on the fire tests was determined by the maximum temperature of $900^{\circ}C$, 7 min to reach the maximum temperature, and the shape coefficient of 1.5. The initiating fire was rapidly increased to 9 min, and decreased.

• Journal of the Korean Vacuum Society
• /
• v.6 no.2
• /
• pp.103-108
• /
• 1997

Silicon field emitter arrays (FEAs) have been fabricated by a novel method employing a two-step tip etch and a spin-on-glass (SOG) etch-back process using double layered thermal/tetraethylortho-silicate (TEOS) oxides as a gate dielectric. A partial etching was performed by coating a low viscous photo resist and $O_2$ plasma ashing on order to form the double layered gate dielectric. A small gate aperture with low gate leakage current was obtained by the novel process. The hight and the end radius of the fabricated emitter was about 1.1 $\mu\textrm{m}$ and less than 100$\AA$, respectively. The anode emission current from a 256 tips array was turned-on at a gate voltage of 40 V. Also, the gate current was less than 0.1% of the anode current.

• Journal of Technologic Dentistry
• /
• v.38 no.4
• /
• pp.299-304
• /
• 2016

Purpose: This research is conducted for better clinical test of Zirconia as we find out the fracture strength difference of Zirconia on cement gaps of full Crown that made use of Zirconia which is somewhat being used in recent dental technology. Methods: We produced each nine of Zirconia Crown of Zirconia fracture cement gaps A group(0.03 mm), B group(0.05 mm), C group(0.08 mm) on cement gaps by use of CAD/CAM, and compared the results. We could end up getting conclusions as following. Results: There was fracture strength difference per cement gaps but no impact(P<0.05). There was difference between $1.962{\pm}0.259$ from group A and $2.005{\pm}0.367$ from group B, but no impact(P<0.05). There was difference between $1.962{\pm}0.259$ from group A and $2.478{\pm}0.331$ from group C, but it's hard to be considered as an impact(P<0.05). Conclusion: Because of the hight pressure 0.08 mm is fractured and Margin has a lot of empty space due to gap for 0.08 mm. To identify the difference between 0.08 mm and 0.05 mm, 0.08 mm is selected as a gap. Therefore when it comes to using 0.05 mm authentically 0.05 mm is quite practical to use as a gap.

• Journal of the Korean Home Economics Association
• /
• v.34 no.5
• /
• pp.283-292
• /
• 1996

This study examines the character of "Tencel" named as Ecology Fiber and investigates the fitness of it as the textile and the satisfaction in dress when its fastness is compared with that of Rayon classified into Celulose textile. Dye experiment selected 100% Tencel, Rayon for the samples, which were dyed into the direct dye and Turky Blue and Blue of the rective dye and were washed twelve times by the automatic washer. After that, the dye experiment examines the light, laundering, perspiration, rubbing and the composite fastness of the perspiration and hight in the lists of the dye fastness. The results are as follows: 1. The experiment of the color fastness, especially in T-blue of the direct dyestuff, requiring the twelve times-repeatedly-washing by the detergent says that the color fastness of Tencel is superior to that of the cellulose textile ; Rayon. 2. The experiment of the light fastness says that the fastness of Tencel is superior to that of Rayon. 3. The experiment of the laundering fastness says that all of Tencel, Rayon shows the excellent result in the direct dye than in the reactive dye. 4. The experiment of the rubbing fastness says that although Tencel, Rayon show the remarkable result in the desiccant experiment than in the humid one, the rubbing fastness of Tencel is superior to that of others. 5. The experiment of perspiration fastness says that Tencel, Rayon have the closely tightened tendency not to be altered through the acid and alkali perspirations. 6. The experiment of the composite fastness of perspiration and light indicates that the artifical perspirations, though the light lets the fastness of textiles weeken, do very slightly make them loosen, which does not offer the outstanding result. This whole result show that the fastness of Tencel is superior to that of Rayon. The Korean Fiber Enterprise in clothing should make the new and ecological fiber "Tencel" by means of the large amount of investment, and the technique of handing and controlling about it, considering that the dangerous needle of environmental pollution has been slackening the close-related ecological knots of the global environment. global environment.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.3
• /
• pp.56-63
• /
• 2003

A silent type ozone generator using water surface has been studied and improved its ozone generation characteristics by installing dielectric heads in the just under the surface of the wale- At this time, different permittivitis of dielectric beads were used to change the discharge condition of water surface. The current-voltage characteristics and characteristics of ozone generation quantity of the test system were investigated and discharge photos of glass beads were observed The height of Taylor cone may be the cause of the discharge bridge to decrease the ozone generation on the discharge spacing. In this study, the hight of Taylor cone could be controlled greatly by installing dielectric beads just under the water surface. Therefore a higher ozone generation also could be obtained. As the permittivity of dielectric material increased. discharge starting voltage was advanced and maximum 110 ppmy of ozone was generated by using the ferroelectric ball.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2003.05a
• /
• pp.206-211
• /
• 2003

Bans on TBT based antifouling paints have been drafted since 1998 by meeting 42, 43, 45 and 46 for the MEPC(Marine Environmental Protection Committee) of the International Marine Organization, and decided finally at a Diplomatic Conference of the IMO in October 2001. It was a key issue that there should be a global prohibition on the presence of organo-tin compounds in ships by 1 Jan. 2008. TBT Paint Waste from ship happens by vast quantity since 2003. This paper suggests a method to design Treatment System for TBT Paint Waste from Ship. The result of measurement in pyrolysis system were removal rate on 99％. at hight temperature in 1000$^{\circ}C$ and reaction time 1hr. TBT removal was more that 99％.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.2
• /
• pp.26-36
• /
• 2013

Purpose of this study is to develop virtual components and environment for developing a controller of an Active Air Suspension System in laboratory that slough off existing development environment using real vehicle test. This paper presents an air spring modeling and analysis of air suspension system for a commercial vehicle. Preferentially, It was performed vehicle test for pneumatic system and an air spring for characteristic analysis of system. Each component of an air spring suspension system was developed through emulations and modeling of system for pressure and height sensors in the basis on test results in SILS environment. Non-linear characteristics of air spring are accounted for using the measured data. Also, pressure and volume relations for vehicle hight control is considered. After performance verification of virtual model was performed, we developed virtual environment based on HILS for an Active Air Suspension System. We studied estimation and verification technology for control algorithm that developed.