• 한국항공우주학회지
• /
• 제45권8호
• /
• pp.639-646
• /
• 2017

본 논문에서는 군용 항공기를 위한 새로운 하중 모니터링 시스템에 대하여 소개하였다. 이 시스템은 항공기에 장착되는 센서와 탑재장비 및 지상에서 운용되는 지상분석장비로 구성된다. 이 시스템을 이용하여 항공기에 작용하는 구조정적하중을 비행파라미터로 추정할 수 있을 뿐 아니라, 정적하중, 동적하중 및 예상치 못한 이벤트에 의한 구조물의 응답을 센서로 측정할 수 있다. 특히 다점 측정이 가능한 광섬유 센서를 사용하였다. 탑재장비는 관련 군사규격서의 요구도를 만족하도록 설계되었으며, 일련의 환경시험으로 입증하였다. 본 시스템은 비행시험에 앞서 지상구조시험에 사용되고 평가되었으며, 향후 비행시험평가를 통하여 군용 항공기의 구조하중 모니터링 시스템으로 사용될 예정이다.

• 한국가스학회지
• /
• 제4권3호
• /
• pp.19-25
• /
• 2000

지진 발생 시 일어날 수 있는 대규모 가스 폭발과 같은 2차 재앙을 미연에 방지하기 위해 천연가스 공급관리소에 설치하는 지진 감지 및 전송 시스템을 개발하였다. 천연가스 공급관리소에서 지진 감지 시스템을 효율적으로 설치하고 운용하기 위하여, 공급관리소의 지반 노이즈패턴 분석을 통하여 지반의 운동을 좀더 정밀히 계측할 수 있는 센서 설치 위치와 설치 방법을 제안하였다. 지진 발생 시 가스 차단 여부를 신속히 판단하기 위해 PGA(Peak Ground Acceleration)와 지진파가 가지는 에너지와 밀접한 연관성을 가지는 Sl(Spectrum Intensity)를 실시간으로 계산하는 알고리즘을 개발하였고 이를 지진 감지 시스템 내에 실현하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.165-170
• /
• 2006

In the Civil Aviation field, the international trend (through ICAO, EUROCONTROL) is to adopt one positioning system that allows to follow more flight phases. This will allow to release themselves by ground installations and optimize the traffic flows following the aRea Navigation (RNAV) concept. In order to realize this goal the European Scientific Community are focusing on Augmentation Systems based on Satellite infrastructure (SBAS - Satellite Based Augmentation System) and on Ground based ones (GBAS - Ground Based Augmentation System). The goal of this work is to present some results on SBAS and GBAS performances. Regarding SBAS, the Department of Applied Sciences of Parthenope University, after the acquisition of a Novatel OEM4 SBAS receiver has created a monitoring station that reflect as much as possible a standardized measure environment for EGNOS Data Collection Network (EDCN), established by Eurocontrol. The Department of Applied Science has decided to carry out a own monitoring survey to verify the performance of EGNOS that can be achieved in South Europe region, a zone not very covered by official (EDCN) monitoring network. Regarding GBAS, we started from a data set of measurements carried out at the GBAS of Milan-Linate airport where we work on a ground installation (GMS - Ground Monitoring Station) that supervises the GBAS signal and that represent, for our purposes, the Aircraft subsystem. So the set of data collected is to be considered in RTK mode and after the measures session we processed them with the software PEGASUS v 4.11. Both experiences give us the possibility to evaluate the GNSS1 performance that can be achieved.

• Nuclear Engineering and Technology
• /
• 제52권10호
• /
• pp.2151-2161
• /
• 2020

The study presents a review of research advancements in the field of gamma radiation detection systems for emergency radiation monitoring, particularly two major sub-systems namely (i) the radiation detector and (ii) the detection platform - air-borne and ground-based. The dynamics and functional characteristics of modern radiation detector active materials are summarized and discussed. The capabilities of both ground-based and aerial vehicle platforms employed in gamma radiation monitoring are deliberated in depth.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1196-1202
• /
• 2007

In construction of high speed railway, the fan shape is limited to achieve reduction of required travel time and concrete railway which has structural stability and induces small maintenance cost with allowable ground settlement is recently applied. So construction of concrete railway on soft ground in which considerable ground settlement occurs increases and settlement management in soft ground section is required. Field monitoring on ground movement and integrated geotechnical information system which manages construction, design, and field monitoring data are essential for settlement management of concrete railway subgrade. Site investigation data are also required due to future repair work. Therefore in this study, integrated geotechnical information system for construction and maintenance of concrete railway is developed. The developed system consists of a database and an application program. The database contains site investigation, construction, design, and field monitoring data throughout a railway. Application program performs various functions on managing and utilizing information in the database with graphic visualization of output. And by providing integrating information with comprehensible visual displays, the applicability and effectiveness of the developed system for construction and maintenance management were confirmed.

• Smart Structures and Systems
• /
• 제7권4호
• /
• pp.303-317
• /
• 2011

A specially designed tendon, which is proposed by embedding an FBG sensor into the center king cable of a 7-wire strand tendon, was applied to monitor the prestress force and load transfer of ground anchor. A series of tensile tests and a model pullout test were performed to verify the feasibility of the proposed smart tendon as a measuring sensor of tension force and load transfer along the tendon. The smart tendon has proven to be very effective for monitoring prestress force and load transfer by measuring the strain change of the tendon at the free part and the fixed part of ground anchor, respectively. Two 11.5 m long proto-type ground anchors were made simply by replacing a tendon with the proposed smart tendon and prestress forces of each anchor were monitored during the loading-unloading step using both FBG sensor embedded in the smart tendon and the conventional load cell. By comparing the prestress forces measured by the smart tendon and load cell, it was found that the prestress force monitored from the FBG sensor located at the free part is comparable to that measured from the conventional load cell. Furthermore, the load transfer of prestressing force at the tendon-grout interface was clearly measured from the FBGs distributed along the fixed part. From these pullout tests, the proposed smart tendon is not only expected to be an alternative monitoring tool for measuring prestress force from the introducing stage to the long-term period for health monitoring of the ground anchor but also can be used to improve design practice through determining the economic fixed length by practically measuring the load transfer depth.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.452-461
• /
• 2008

Previous settlement prediction method based on settlement monitoring such as hyperbolic, monden method were developed under instantaneous loading condition and have restriction to be applied to soft ground under ramp loading condition. In this study, settlement prediction method under ramp loading was developed. New settlement prediction method under ramp loading considers influence factors of consolidation settlement and increase accuracy of settlement prediction using field monitoring data after ramp loading. Large consolidation tests for ideally controlled one dimensional consolidation under ramp loading condition were performed and the settlement behavior was predicted based on the monitoring data. As a result, new prediction method is expected to have great applicability and practicability for the prediction of settlement behavior.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1712-1716
• /
• 2008

Performance of ground improvement project using prefabricated vertical drains of condition, in which approximately 10m dredged fill overlies original soft foundation layer in the coastal area has been conducted. From field monitoring results, excessive ground settlement compared to predicted settlement in design stage developed during the following one year. In order to predict the final consolidation behavior, recalculation of consolidation settlements and back analysis using observed settlements were conducted. Field monitoring results of surface settlements were evaluated, and then corrected because large shear deformation was occurred by construction events in the early stages of consolidation. To predict the consolidation behavior, material functions and in-situ conditions from laboratory consolidation test were re-analyzed. Using these results, height of additional embankment is estimated to satisfy residual settlement limit and maintain an adequate ground elevation. The recalculated time-settlement curve has been compared to field monitoring results after additional surcharge was applied.

• 한국항행학회논문지
• /
• 제15권6호
• /
• pp.1025-1033
• /
• 2011

본 논문은 상용 HSDPA(High Speed Downlink Packet Access)이동통신 모뎀을 이용한 무인항공기 항법 모니터링용 Peer-to-Peer 통신시스템 구현에 대하여 연구 하였다. 본 시스템은 통신 중계용 서버, 탑재통신 장비 및 다수의 모니터링 장치로 구성되며, 상용 HSDPA 모뎀을 이용하여 무인항공기 항법정보를 서버를 통하여 다수의 모니터링 장치로 실시간 전송한다. 본 논문에서는 이러한 시스템에서 발생할 수 있는 현상들을 관찰 하고자 지상실험 및 비행실험을 통해 데이터를 확보 하였다. 실험 결과, 통신환경에 따라 탑재통신장치와 모니터링 장치 사이의 지연시간이 평균 약 300msec 가량 측정 되었으며, 탑재통신장치와 서버간의 데이터의 체증(congestion) 및 패킷 손실이 발생하였지만, 차량을 이용한 고속의 장거리 이동 테스트와 무인기 비행에 의한 고도 테스트를 통하여 무인기 항법 모니터링 시스템 구현이 가능함을 확인 하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1046-1053
• /
• 2006

In the large scale recent reclaiming works performed within the wide spatial boundary, evaluation of long-term consolidation settlement and residual settlement of the whole construction area is sometimes made with the results of the limited ground investigation and measurement. Then the reliability of evaluation has limitations due to the spatial uncertainty. Additionally, in case of large scale deep excavation works such as urban subway construction, there are a lot of hazardous elements to threaten the safety of underground pipes or adjacent structures. Therefore it is necessary to introduce a damage prediction system of adjacent structures and others. For the more accurate analysis of monitoring information in the wide spatial boundary works and large scale urban deep excavations, it is necessary to perform statistical and spatial analysis considering the geographical spatial effect of ground and monitoring information in stead of using diagrammatization method based on a time-series data expression that is traditionally used. And also it is necessary that enormous ground information and measurement data, digital maps are accumulated in a database, and they are controlled in a integrating system. On the abovementioned point of view, we developed Geomonitor 2.0, an Internet based real time monitoring program with a new concept by adding GIS and geo-statistical analysis method to the existing real time integrated measurement system that is already developed and under useful use. The new program enables the spatial analysis and database of monitoring data and ground information, and helps the construction- related persons make a quick and accurate decision for the economical and safe construction.