• 한국의류산업학회지
• /
• 제10권6호
• /
• pp.966-978
• /
• 2008

The aim of this study was to provide size intervals in hand requisite in design of gloves. In this study, a survey was administered to gather information about glove manufacturers' sizing systems. In addition, KS glove standards' size dimensions were analyzed. As well, the ISO hand sizing system was also studied. Based on all the analyses' results, a new glove size intervals were composed. The size comprised the control dimensions of hand length and hand circumference. The size interval was 8mm in hand length and 13mm in hand circumference. The size range was established by making the coverage above 80%. The coverage of the new size interval system for an adult's hand was 86.4% and 13 sizes were suggested. The coverage of the male size system was 86.0% and 10 sizes were suggested. The coverage of the female size system was 87.6% and 8 sizes were suggested. For the unfitted gloves, size ranges based on hand length and hand circumference were developed. For the adults group, S, M, L, and XL were suggested and the coverage of the new size range was 78.8%. For the male group, S, M, and L were suggested and the coverage was 82.3%. For the female group, S, M, and L were also suggested and the coverage was 81.3%.

• 한국안전학회지
• /
• 제23권6호
• /
• pp.62-69
• /
• 2008

As the concerns of dermal exposure of spray painters to isocyanates in the automobile industry, glove performance was examined like permeation rate and breakthrough time including fatigue test. Methylene chloride was used as the solvent for derivatization of the isocyanates with a 97.5% recovery. Ghost wipe pads were used to wipe the surface of the glove material after chemical penetration through the glove material placed under a disposable test cell. Several solvents were tested, such as thinner(xylene, toluene) and cleaning agent(acetone) by using a standard permeation test cell(AS/NZS standard 2161. part 10.3). Solvents accelerate chemical permeation through the gloves more quickly than pure HDI hardener products. The longest breakthrough times were from Nitrosolve gloves, not detected in 8 hours, compared with others like Latex, Neoprene, TNT and Dermo Plus. Therefore Nitrosolve gloves could be recommended as personal protective equipment in crash repair shops. In addition, revised exposure limit of korean regulation should be suggested for employee to minimize the risk of health symptoms.

• 한국소음진동공학회논문집
• /
• 제16권6호
• /
• pp.602-608
• /
• 2006

In order to evaluate performance of anti-vibration gloves, it is necessary to measure the transmitted vibration to the hand and the applied forces at the same time while gripping the vibrating handle. In the study a system was developed to measure both the vibration and the forces. The system consists of a measurement handle with eight strain gauges and two accelerometers and a PC-based system with a software for signal processing and evaluation of the hand-transmitted vibration and for control of applied forces in the pre-determined range. The handle was installed on the vibration shaker which is strong enough so as not to be affected by dynamic coupling with the hand-arm system. Whole procedure of ISO 10819 to determine the vibration transmissibility of anti-vibration gloves was programmed into the system. As an example of the application, three subjects joined the test to get vibration transmissibilities of anti-vibration gloves where each glove was tested twice a subject. Average and standard deviation of vibration transmissibility were also calculated.

• 한국의류학회지
• /
• 제45권6호
• /
• pp.923-934
• /
• 2021

Most apparel products have national standards for sizing; however, for gloves, national sizing standards have not yet been established. This study aims to analyze children's hand dimensions and propose a size specification for children's gloves that shows children's hand-related size information. Among the 3D measurements of sixth Size Korea Project, the measurement data of 19 dimensions related to the hands of 1,057 boys and girls aged 7-13 years old were analyzed. The distribution and growth trend of hand measurements for boys and girls demonstrated considerable mean differences and distribution trends by gender and age as per hand dimensions, which leads to the conclusion that it is necessary to show these results in the children's glove design. Based on these results, the cross-distribution maps of children's hand length and hand circumference were drafted; furthermore, the distribution relationship with an adult hand size was identified. Based on the distribution of hand sizes, the distribution of adult hand sizes overlapped with children's hand sizes was verified, and children's glove size specifications were presented. The results can be used as useful data such as measures for setting the size range and sizing system for children's gloves.

• 패션비즈니스
• /
• 제27권4호
• /
• pp.21-37
• /
• 2023

This study aimed to classify the hand types of adult males aged 20 to 69 years using three-dimensional measurement data from the 2020 8th Korean Anthropometric Survey, the latest measurement data from the National Institute of Standards and Technology Size Korea, and explore the characteristics of each type. Through this, I aimed to draw implications for the development of work gloves. The factors that make up an adult male's hand were categorized into hand and finger thickness factors, palm length factors, and finger length factors. Adult male hands were categorized into four types: small, thin hands and long fingers; thick, long fingers; medium, short hands and fingers; and large, thin, short fingers. The analysis showed that the younger the age, the more slender and long the hands and fingers, and as age increased, hands and fingers became shorter and thicker. Implications for the development of work gloves included the need for size segmentation based on the age of the work glove user, changes in the way glove dimensions are set based on hand length and hand circumference, and the need to segment gloves by the type of work. Hand typing in future research should be done according to occupational groups, and glove patterns should be developed for each type of work based on the results of this study.

• 한국환경보건학회지
• /
• 제37권4호
• /
• pp.298-305
• /
• 2011

Objectives: There has been a great amount of controversy in the food industry over the effectiveness of using gloves. The objectives of this study were to examine the microbial contamination of food handlers' hands and determine if using gloves could ensure safe handling of foods. Methods: Samples were collected through the glove-juice method from the bare and gloved hands of food handlers at work and were analyzed for the presence of aerobic plate counts, total coliform, fecal coliform, Escherichiacoli, Staphylococcus aureus, and Salmonella spp. Microbiological testing was conducted according to the Food Code of Korea. Results: Microbial contamination was consistently higher with bare hands than with gloved hands, although the microbial loads on both hands increased over time. Under certain conditions, there were significant differences between the bacterial loads on bare and on gloved hands (p<0.05). E. coli, S. aureus, and Salmonella spp. were still alive on both bare and gloved hands at the time the food handlers finished their work. Conclusions: Wearing gloves was associated with a marked reduction of bacterial contamination of the hands. However, the practice of continuously wearing gloves during food handling increases the potential for cross-contamination of bacteria. The findings of this study emphasize the need for a rational use of gloves, and strict adherence to hand hygiene compliance among food handlers.

• 대한가정학회지
• /
• 제43권8호
• /
• pp.115-122
• /
• 2005

The hand performs functions such as grabbing and other movements. In order to accomplish these movements in various kinds of operational environments, appropriate gloves must be worn to protect your hands. Choosing the appropriate type of glove is very important when wearing gloves in these types of operational environments. The reasons one wears gloves varies depending on age and gender. Unmarried women in their early twenties, for example, occasionally wear gloves for decoration rather than for functional reasons. However, previous studies examined a range of topics, and as such investigations dealing with specific body shape and demands of consumer are needed. Therefore in this study, the hands of unmarried women ranging in age from 20 to 24 were measured and hand shape types were analyzed in order to present basal data which can be used to help design improved glove patterns and produce appropriate, functional gloves. A total of 261 Korean women were measured. Fifty-seven right hand dimensions were measured and five dimensions from both hands were measured. Six factors were identified through factor analysis and those factors constituted $73.259\%$ of total variance. Two clusters of hand shapes were categorized using 6 factor scores by cluster analysis. Type 1 hand shape is defined as long hands with small width, girth, and thickness, long and thin fingers, and high vertical palm height. Type 2 hand shape is defined as short hands with large width, girth and thickness, short fingers, thick knuckles, and short vertical palm height. The characteristics of type 1 and 2 hand shapes are similar to women's hand type classification results from previous reports, but there was a significant difference in subject distribution by type. Therefore, standard data on hand shapes should be produced by developing measuring instruments and selling more accurate standard measuring points. By doing this it could help in the development of improved glove patterns, and also aid in planning production based on hand type.

• The Korean Journal of Pain
• /
• 제27권2호
• /
• pp.145-151
• /
• 2014

Background: The physician's hands are close to the X-ray field in C-arm fluoroscopy-guided pain interventions. We prospectively investigated the radiation attenuation of Proguard RR-2 gloves. Methods: In 100 cases, the effective doses (EDs) of two dosimeters without a radiation-reducing glove were collected. EDs from the two dosimeters-one dosimeter wrapped with a glove and the other dosimeter without a glove-were also measured at the side of the table (Group 1, 140 cases) and at a location 20 cm away from the side of the table (Group 2, 120 cases). Mean differences such as age, height, weight, radiation absorbed dose (RAD), exposure time, ED, and ratio of EDs were analyzed. Results: In the EDs of two dosimeters without gloves, there were no significant differences ($39.0{\pm}36.3{\mu}Sv$ vs. $38.8{\pm}36.4{\mu}Sv$) (P = 0.578). The RAD ($192.0{\pm}182.0radcm^2$) in Group 2 was higher than that ($132.3{\pm}103.5radcm^2$) in Group 1 (P = 0.002). The ED ($33.3{\pm}30.9{\mu}Sv$) of the dosimeter without a glove in Group 1 was higher than that ($12.3{\pm}8.8{\mu}Sv$) in Group 2 (P < 0.001). The ED ($24.4{\pm}22.4{\mu}Sv$) of the dosimeter wrapped with a glove in Group 1 was higher than that ($9.2{\pm}6.8{\mu}Sv$) in Group 2 (P < 0.001). No significant differences were noted in the ratio of EDs ($73.5{\pm}6.7%$ vs. $74.2{\pm}9.3%$, P = 0.469) between Group 1 and Group 2. Conclusions: Proguard RR-2 gloves have a radiation attenuation effect of 25.8-26.5%. The radiation attenuation is not significantly different by intensity of scatter radiation or the different RADs of C-arm fluoroscopy.

• 한국전산유체공학회지
• /
• 제11권2호
• /
• pp.56-61
• /
• 2006

As the size and dimension of target problems in the field of computational engineering including CFD gets bigger and higher, it is needed to have more efficient and flexible data visualization environment in terms of software and hardware. Even though it is still manageable to use a mouse in controlling 3-dimensional data visualization, it would be beneficial to use 3-D input device for 3-D visualization. 'Data Glove' is one of the best 3-D input devices, because human hands are best tools for understanding 3-D space and manipulating 3-D objects. Signals coming from 'Data Glove' are analog and very sensitive to finger motions, therefore signal filtering using a digital filter is applied. This paper describes our experience and benefits of using data gloves in controlling 3-dimensional postprocessing softwares.

• Archives of Plastic Surgery
• /
• 제40권5호
• /
• pp.630-632
• /
• 2013

Vacuum-assisted wound healing has been proven to be more efficacious than conventional dressings. Vacuum dressing has been frequently modified given the restrictions in resources available. Here we present a modified method of vacuum dressing by using surgical or gynaecological gloves for lower and upper limb wounds. Vacuum dressing was applied with parts of a surgical or gynaecological glove and Opsite with T-tailing of the suction outlet. Vacuum-assisted wound healing using the surgical gloves showed relatively good wound healing in the amputation stump, finger, arm, and leg in the cases studied.