• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.4
• /
• pp.821-825
• /
• 2004

The a-Si：H TFTs decreasing parasitic capacitance of source-drain is fabricated on glass. The structure of a-Si：H TFTs is inverted staggered. The gate electrode is formed by patterning with length of 8 ${\mu}m∼16 ${\mu}m. and width of 80∼200 ${\mu}m after depositing with gate electrode (Cr) 1500 under coming 7059 glass substrate. We have fabricated a-SiN：H, conductor, etch-stopper and photoresistor on gate electrode in sequence, respectively. The thickness of these thin films is formed with a-SiN：H (2000 ), a-Si：H(2000 ) and n+a-Si：H (500). We have deposited n+a-Si：H ,NPR(Negative Photo Resister) layer after forming pattern of Cr gate electrode by etch-stopper pattern. The NPR layer by inverting pattern of upper gate electrode is patterned and the n+a-Si：H layer is etched by the NPR pattern. The NPR layer is removed. After Cr layer is deposited and patterned, the source-drain electrode is formed. The a-Si：H TFTs decreasing parasitic capacitance of source-drain has channel length of 8 ~20 ${\mu}m and channel width of 80∼200 ${\mu}m. And it shows drain current of 8 ${\mu}A at 20 gate voltages, Ion/Ioff ratio of 108 and Vth of 4 volts.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.12 no.1
• /
• pp.29-34
• /
• 2006

A breeding programme was initiated during 2001 utilizing two polyvoltine silkworm breeds viz. $BL_{69}$, an evolved breed tolerant to high temperature and MAR, comparatively resistant to Bombyx mori nuclear polyhedrosis virus (BmNPV) with the objective to develop robust polyvoltine breeds and hybrids. The breed $NP_1$ was developed by exposing the fifth instar larvae to high temperature $(36{\pm}1^{\circ}C)$, high Relative Humidity ($85{\pm}5%$ R.H.) and inoculating third instar larvae with BmNPV inoculum. At $F_{12}$, the breed was tested for hybrid forming ability utilizing six bivoltine silkworm breeds viz. $CSR_2,\;CSR_4,\;CSR_{17},\;CSR_{18},\;CSR_{19}\;and\;NB_4D_2$. The hybrid $'NP_1{\times}CSR_{17}'$ exhibited its superiority by recording 97.2% survival, 1.892 g cocoon weight, 0.406 g cocoon shell weight, 21.5% cocoon shell ratio, 16.6% raw silk percentage and 890 m filament length whereas the control $(PM{\times}CSR_2)$ has recorded 90.2% survival, 1.599 g cocoon weight, 0.304 g cocoon shell weight, 18.9% cocoon shell ratio, 13.1 % raw silk percentage and 768 m filament length. Commercial exploitation of the new $polyvoltine{\times}bivoltine$ hybrid in sericulture industry has been discussed.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.9 no.2
• /
• pp.167-171
• /
• 2004

We constructed an oligo-d(T) primed directional cDNA library from the Bombyx mandarina whole larvae. In an effort to isolate genes expressed in the B. mandarina, 227 expressed sequence tags (ESTs) were generated by single-pass sequencing from the cDNA library. Sequence analysis showed that 107 clones (47.1%) were classified into known genes and 120 clones (52.9%) were novel transcripts, which are unknown for their function. Of the 107 known genes, the most abundant gene was found to be actin and followed by serine protease in the expression profile. Among these clones, a serine protease homolog (BmSP) which is a class of proteolytic enzymes isolated. Full-length sequence of the BmSP cDNA clone was 922 bp in length and has an open reading frame of 276 amino acids. The conserved histidine, aspatic acid and serine residues forming the catalytic center as well as cysteine residues contributing to three disulphide bonds also were found in Bmsp gene. mRNA expression analysis revealed a high and specific expression of the gene only in midgut tissue, suggesting that BmSP gene is closely associated with the expression of digestive enzyme.

• Journal of Veterinary Clinics
• /
• v.37 no.1
• /
• pp.1-8
• /
• 2020

Canine otitis externa is a common disorder in small animal practice with prevalence up to 20%. In a large percentage of cases, canine otitis externa is a chronic and recurrent disease also associated with drug-resistant bacteria that is difficult to treat with traditional antibiotics. Photodynamic therapy (PDT) is a new strategy to exterminate pathogenic microorganisms such as bacteria and fungi. The purpose of this study was to investigate the effectiveness of photodynamic therapy against canine otitis externa using three photosensitizer (PS); 5-Aminolevulinic acid (5-ALA) and Methyl aminolevulinic acid (MAL) with semiconductor laser diode (SLD, 635nm of wave length), Chlorophyll-lipoid complex (CLC) with light-emitting diode (LED, 660nm of wave length). After PDT, dogs showed improved Otitis Index Score (OTIS) in swelling, exudate, odor, and pain. A result of the cytology test revealed decrease of bacteria and malassezia count in the oil immersion field and colony forming units count. PDT was effective as a bacteriocide of methicillin-resistant Staphylococcus pseudintermedius (MRSP) and a fungicide of Malassezia pachydermatis. MAL and 5-ALA were more effective PS against canine otitis externa than CLC. These results suggest that PDT is a new strategy to exterminate pathogenic microorganisms such as bacteria and fungi. PDT can be considered as a new therapeutic approach for canine recurrent otitis externa and a countermeasure to drug resistance that is a disadvantage of traditional antibiotic and antifungal therapy.

• Journal of IKEEE
• /
• v.25 no.3
• /
• pp.467-472
• /
• 2021

Stable operation of semiconductor devices is needed even at high temperatures. Among the structures of semiconductor devices, the area that can cause unstable electrical responses at high temperatures is the contact layer between the metal and the semiconductor. In this study, the effect of annealing conditions included in the process of forming a contact layer of nickel silicide(NiSix) on a p-type SiC layer on the specific contact resistance of the contact layer and the total resistance between the metal and the semiconductor was investigated. To this end, a series of electrodes for TLM (transfer length method) measurements were patterned on the 4 inch p-type SiC layer under conditions of changing annealing temperature of 1700 and 1800 ℃ and annealing time of 30 and 60 minutes. As a result, it was confirmed that the annealing conditions affect the resistance of the contact layer and the electrical stability of the device.

• Journal of Mushroom
• /
• v.19 no.1
• /
• pp.33-40
• /
• 2021

The genome sequence of various Flammulina species has recently been reported, thereby revealing a diverse genetic repertoire. In this study, we identified laccase genes and analyzed their structural characteristics in Flammulina elastica (F. elastica) genome. Through genome analysis and bioinformatics approaches, three laccase genes (Fe-lac1, -lac2, and -lac3) were identified, ranging from 1,548 to 1,602 bp in length. These genes contained a copper ion-binding region with ten histidine residues and one cysteine residue and a disulfide bond-forming region with four cysteine residues. Full-length cDNA sequencing analysis revealed that laccase genes contain 12 to 16 introns and signal peptides between 17 and 22 bp in the N-terminus. Structural characterization of the laccase genes identified in this study should help in better understanding the biomass decomposition of F. elastica.

• Tribology and Lubricants
• /
• v.38 no.5
• /
• pp.213-221
• /
• 2022

This paper presents performance measurements of pressure drop and leakage flow rate of test flat seals with asymmetric inclined grooves. This study aims to reveal the influence of groove shapes, often machined in radial film riding-face seals, in forming a hydrodynamic wedge on leakage performance. A test facility was developed, and test seals were manufactured to study the effects of the inlet pressure level, ratio of inlet to outlet pressure, seal groove length, and seal groove height on the steady-state pressure drop and leakage performance. A series of tests were conducted, and the test data were compared to the predictions from a simple and efficient mathematical model using a one-dimensional Reynolds equation. The test results revealed that an increase in the inlet pressure increased the pressure drop through the test seals. The leakage flow rate increased significantly as the inlet pressure and ratio of the inlet to outlet pressure increased. The groove shape also affects seal performance. An increase in the groove length and height resulted in an evident increase in the leakage flow rate. The simple model predictions underestimated the leakage flow rates but showed good agreement with the trend in the measurements for all test operating conditions and changes in the groove shape.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.2
• /
• pp.60-64
• /
• 2023

In this study, the electrical contact resistance characteristics between graphene and metals, which is one of important factors for the performance of graphene-based devices, were compared. High-quality graphene was synthesized by chemical vapor deposition (CVD) method, and Al, Cu, Ni, and Ti as electrode materials were deposited on the graphene surface with equal thickness of 50 nm. The contact resistances of graphene transferred to SiO₂/Si substrates and metals were measured by the transfer length method (TLM), and the average contact resistances of Al, Cu, Ni, and Ti were found to be 345 Ω, 553 Ω, 110 Ω, and 174 Ω, respectively. It was found that Ni and Ti, which form chemical bonds with graphene, have relatively lower contact resistances compared to Al and Cu, which have physical adsorption properties. The results of this study on the electrical properties between graphene and metals are expected to contribute to the realization of high-performance graphene-based devices including electronics, optoelectronic devices, and sensors by forming low contact resistance with electrodes.

• The Plant Pathology Journal
• /
• v.15 no.4
• /
• pp.228-235
• /
• 1999

Genetic diversity of ninety-five Korean isolates of Phytophthora was investigated on the basis of PCR-RFLP of ribosomal DNA. The isolates were previously identified as following fifteen species by mycological and cultural characteristics; P. boehmeriae, P. cactorum, P. cambivora, P. capsici, P. cinnamoni, P. citricola, P. citrophthora, P. cryptogea, P. drechsleri, P. erythroseptica, P. infestans, P. megasperma, P. nicotianae, P. palmivora and P. sojae. The regions of small subunit (SSU) and internal transcribed spacer (ITS) of rDNA were amplified with primer pair, NS1 and ITS4, by polymerase chain reaction (PCR) and digested with nine restriction enzymes. P. boehmeriae, P. cactorum, P. cambivora, P. capsici, P. cinnamomi, P. citricola, P. citrphthora, P. infestans, P. nicotianae and P. palmivora showed specific band patterns for each species. However, P. sojae and P. erythroseptica presented identical band patterns and P. cryptogea, P. drechsleri and P. megasperma were divided into six groups, which were not compatible with delineation of the species. A group originated from cucurbits showed distinct band patterns from other groups, but the other five groups were closely related within 96.0% similarity, forming one complex group. Consequently, Korean isolates of Phytophthora were divided into thirteen genetic groups and each group was readily differentiated by comparing digestion patterns of AvaII, HaeIII, MboI, HhaI and MspI. Therefore, PCR-RFLP of rDNA using the five enzymes can be used to differentiate or identify the Phytophthora species reported in Korea so far.

• Journal of Sensor Science and Technology
• /
• v.22 no.1
• /
• pp.89-94
• /
• 2013

In this paper, we developed a beam of MEMS probe card using a BeCu sheet. Silicon wafer thickness of $400{\mu}m$ was fabricated by using deep reactive ion etching (RIE) process. After forming through silicon via (TSV), the silicon wafer was bonded with BeCu sheet by soldering process. We made BeCu beam stress-free owing to removing internal stress by using joule heating. BeCu beam was fused by using joule heating caused by high current. The fabricated BeCu beam measured length of 1.75 mm and width of 0.44 mm, and thickness of $15{\mu}m$. We measured fusing current as a function of the cutting planes. Maximum current was 5.98 A at cutting plane of $150{\mu}m^2$. The proposed low-cost and simple fabrication process is applicable for producing MEMS probe beam.