• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.385-386
• /
• 2010

본 논문은 석회석 미분말을 활용한 고유동 콘크리트의 유동 특성 및 자기수축량을 통하여 자기수축 특성을 알아보았다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.215-216
• /
• 2021

In this study, the liquidity and compressive strength characteristics of concrete mixed with self-healing capsules were analyzed as part of the study to improve the problems of cracks and maintenance of concrete structures.

• 한국식품영양과학회지
• /
• 제27권3호
• /
• pp.518-524
• /
• 1998

Liposomes have been widely employed as biomembrane-mimetic system and drug-delivery system. In these applications, the low stability of liposomes has been the most serious problem. They have relatively short half-lives and easily lysed through interactions with biological components. This study was performed to investigate the effects of godulbaegi extracts on the fludity of phospholipid liposomes. We used dipalmitoyl phosphatidylcholine(DPPC) liposomes which make most stable liposomes among the other phosphatidylcholines. The thermograms of the DPPC liposomal bilayers incorporated with the hexane extract of godulbaegi(Ixeris sonchifolia H.) were obtained, and the enthalpy changes and the sizes of cooperative unit of the transition were calculated. The incorporation of the Ixeris sonchifolia H. into the liposomal bilayers effectively reduced the transition temperature at which the transition from gel state to liquid-crystalline state occurs, broadened the thermogram peaks, and reduced the ratio of van't Hoff to calorimetric enthalpies. These results indicate indicate that the godulbaegi extracts (Ixeris sonchifolia H.) have significant effects on the fluidity of biological membrance.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.429-430
• /
• 2010

본 연구에서는 플라이애쉬가 다량 치환된 고유동 HVFAC 콘크리트의 실리카흄 사용량에 따른 콘크리트 특성에 대한 연구결과를 보고하고자 한다. 결과로서, 실리카흄 사용량이 $10{\sim}20kg/m^3$일 때, 콘크리트의 유동성과 충전성능이 가장 좋은 것으로 나타났다. 그리고 실리카흄 사용량이 증가할 수록 탄산화계수는 기하급수적으로 증가하는 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.381-384
• /
• 1997

It is necessary for manufacturing the high flowing to use the fly-ash as binder of concrete, therefore, Quality of fly-ash is very important to the fluidity of high flowing concrete. In this study, it is comparing and investigating the fludity of high flowing concrete used some fly-ash which it's Ignition loss is 2.44, 4.90, 7.10%. As a result of this experimental study, Ignition loss of fly-ash effects the properties of high flowing concrete, such as air content, flowability, passability etc. but even if valve of ignition loss is upper the specification, properties of high flowing concrete such as setting and hardening time, compressive strength etc.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.385-390
• /
• 1997

In the mixing proportion of high flowing concrete we have to use quantity of power such as cement and superplasticizer, and increase the proportion of fine aggregate more than that of plain concrete to increase flowability and segregation resistance. Therefore, the fresh state of high flowing concrete is largely affected by superplasticizer and change of grade the percentage of surface water. This study aims at development of self-filling up high flowing concrete without compaction, in case of using the fine aggregate of standard grade range, by examination on the influence of fresh state of high flowing concrete, and by understanding influence on various fluidity such as flowability, reinforcement passibility, fillingability, segregation resistance.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 고액공존금속의 성형기술 심포지엄
• /
• pp.160-173
• /
• 1997

Microstructure of hypereutectic Al-17wt.% Si alloy, fabricated by mechanical stirring and by reheating at semi-solid state, was investigated by optical microscope. Flow behavior semi-solid metal also was investigated at diffentent mould temperatures 280$^{\circ}C$, 290$^{\circ}C$ and 300$^{\circ}C$. Size of silicon particles were increased over 100$\mu\textrm{m}$ during solidification as a result of stirring. It is considered as microstructural coarsening by bonding between neighbouring primary silion particles during stirring of slurry. In case of reheating at semi-solid state, however, primary silicon particle was not increased at size of 40$\mu\textrm{m}$ and nearly spherical aluminum solde particle also could be obtained uniformly in distribution. The fludity of Al-17wt.% Si alloys at semi-solid state was improved when solid fraction was 0.7 at mould temperature of 300$^{\circ}C$ than other conditions.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.78-79
• /
• 2021

This study compared and analyzed the fluidity and compressive strength characteristics of mortar using ferronikel slag powder and mixed slag fine aggregate as part of the study to reduce environmental load and increase recycling rate of industrial by-products.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.78-79
• /
• 2021

In this study, the fluidity and compressive strength properties of concrete according to the mixing ratio of mixed slag aggregates were compared as part of research to alleviate the aggregate supply problem and improve environmental pollution by utilizing industrial by-products.

• 대한토목학회논문집
• /
• 제8권2호
• /
• pp.117-124
• /
• 1988

국산 플라이애쉬 6종류에 대한 AE제의 흡착특성(吸着特性)을 살펴 본 결과 플라이애쉬 입자의 AE제흡착(吸着)은 30분 정도에서 거의 완료되었으며 강열감량이 클수록 포화흡착량이 크게 나타났다. 플라이애쉬 강열감량의 대부분은 미연소탄소(未燃燒炭素)이며 따라서 미연소탄소량이 AE콘크리트 중의 공기량을 감소시키는 요인임을 알았다. 한편, 유동화제(流動化劑)의 경우 플라이애쉬 입자의 포화흡착량은 시멘트보다 적으며 시멘트의 경우보다 분산성(分散性)도 다소 낮으나 플라이애쉬를 혼합한 콘크리트에 유동화제를 사용할 경우 유동성이 저하되는 현상은 없었다.