• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.135-138
• /
• 2005

HDL(Hardware Description Language) is the most important modem tools used to describe hardware, and becomes important as we move to higher levels of abstraction. The HDL has been made brisk use of in analog design, MEMS device[1-2], process related field as well as digital design. The most important characteristics of HDL is Abstraction which is the strongest tool that extend greatly designer's design ability. In this paper by the Modelling Continuum with hierarchical structure of abstraction, we apply UML(Unified Modeling Language) to SoC Design with HDL UML makes an easy and visual description of the various levels of abstraction, and gives designers good flexible modeling capabilty for SoC Design.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.430-431
• /
• 2006

This letter reports the fabrication of polycrystalline silicon thin-film transistors (poly-Si TFT) on flexible plastic substrates using amorphous silicon (a-Si) precursor films by sputter deposition. The a-Si films were deposited with mixture gas of argon and helium to minimize the argon incorporation into the film. The precursor films were then laser crystallized using XeCl excimer laser irradiation and a four-mask-processed poly-Si TFTs were fabricated with fully self-aligned top gate structure.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.535-538
• /
• 2004

Zinc Oxide (ZnO) films have attracted considerable attention for transparent conducting films, because of their high conductivity, good optical transmittance from UV to near IR as well as a low-cost fabrication. To increase the conductivity of ZnO, doping of group III elements (Al, Ga, In and B) has been carried out. Transparent conducting films have been applied for optoelectric devices, the development of the transparent conducting thin films on flexible light-weight substrates are required. In this research, the transparent conducting ZnO thin films doped with Aluminum (Al) on polymer substrates were deposited by the RF magnetron suputtering method, and the structural, optical and electrical properties were investigated.

• 한국전기전자재료학회논문지
• /
• 제34권4호
• /
• pp.221-228
• /
• 2021

With the advent of the IoT (internet of things) era, there has been discussion on how to efficiently use various information from daily life. In academic and industrial society, various smart devices such as smart watches, smart phones, and smart glasses have been developed and commercialized for narrowing the physical/psychological distance with user information. According to recent developments of smart devices, the contemporary people have desired to check their body information and treat disease by themselves. According to the needs of the time, biological researches by phototherapy/monitoring have been actively conducted. Among various light sources, microLEDs have been spotlighted due to their superior optoelectric properties and stability. In this paper, we would like to review the state-of-the research results on the next-generation biological therapy devices via microLEDs.

• 한국전기전자재료학회논문지
• /
• 제34권4호
• /
• pp.229-241
• /
• 2021

Since 2010, polymer-based magnetoelectric (ME) composites have been developed with detailed investigations of multiferroic properties such as piezoelectric, magnetostrictive, and magnetoelectric, etc. In particular, as a piezoelectric polymer, poly(vinylidene fluoride) and its co-polymers have been widely used in ME composites for energy harvesting, health monitoring, environment treatment, and bio-medical applications. In this study, main research trend and selected experimental results of polymer-based ME composites are briefly reviewed with respect to composite structure as well as application field. A conclusion was drawn that the polymer-based ME composites would be feasible as flexible devices or functional membranes in the near future.

• 한국전기전자재료학회논문지
• /
• 제34권1호
• /
• pp.44-49
• /
• 2021

Recently, infrared (IR) and near-infrared (NIR) light-emitting diodes (LEDs) were widely used for home medical applications owing to its low output power and wide exposed area for curing. For deep penetration of the light under the skin, multiple LEDs with wavelengths of 700~10,000 nm were located on a flexible printed circuit board. When multiple wavelengths of LEDs were soldered on a circuit board, the lifetime of LED module highly depends on LEDs with a short lifetime. The mean time to failure (MTTF) was able to calculate with the experimental results under high temperature and the Arrhenius model. The results of this study could help companies to approve the warranty of LED modules and its product.

• 한국전기전자재료학회논문지
• /
• 제35권1호
• /
• pp.1-10
• /
• 2022

Two-dimensional materials have shown a great promise for the next-generation electronic materials due to their unique optical, physical, and chemical properties that are distinct from their bulk counterparts. Their atomic-level thickness, the feature for flexible tenability, and exposed huge surface allow various approaches for high-performance nanoscale devices. Especially, this review highlights the recent progress on two-dimensional dielectric nanosheets, which are obtained by cheap and massproducible solution-based exfoliation process, accompanied by the preparation methods, various deposition methods, and the characteristics of devices using a dielectric nanosheet thin films. We also present a perspective on the advantages offered by this two-dimensional dielectric nanosheets for the upcoming future nanoelectonics.

• 로봇학회논문지
• /
• 제17권1호
• /
• pp.68-75
• /
• 2022

In this paper, we considered the deformation shape of the soft rotation actuator as a double curvature shell and proceeded with the analytical development. Since the response of the hyperelastic material has a large nonlinear deformation, the analytical approach is very complicated and the solution cannot be easily obtained. it is assumed that the behavior of the flexible body, which is a superelastic material, takes the form of a double curvature shell, and the formulas for calculating the deformation are simplified. In this process, equilibrium equations in the related coordinate system representing a double curvature shell were derived. In addition, assuming a thin shell, the stress component in the thickness direction was ignored, and the equation was developed by adding the assumption of free rotation without load. In order to verify the analytically calculated value in this way, an experiment was conducted and the results were compared.

• 한국전기전자재료학회논문지
• /
• 제37권5호
• /
• pp.465-475
• /
• 2024

Due to changes in the form factor of display panels and touch screen panels in various devices, capacitive touch systems have evolved to address various issues such as low power consumption, noise immunity, and small chip size. Furthermore, some devices have applications that use a stylus. Since the stylus operates similarly to a finger touch, it encounters similar issues. Recent research trends focus on addressing key issues such as noise, which is primarily caused by the self-capacitor formed between the display cathode and the touch screen panel. In this paper, Various research papers discussing methods to eliminate external noise will be reviewed. These advancements enhance noise immunity in touch systems, making it easier to use thinner and more flexible panels. These progress make touch technology more versatile and reliable in various applications.

• 한국공간구조학회논문집
• /
• 제7권3호
• /
• pp.153-165
• /
• 2007

연성 구조물은 축강성은 강하고 휨 강성이 매우 작은 재료를 주 구조재로 사용하므로 초기강성에 매우 민감한 구조체이다. 막 구조물을 설계하기 위해서는 우선 초기장력 도입으로 인한 구조물의 형상을 정확히 알아야 한다. 이를 위해서 모형을 통한 모델링이나 컴퓨터를 이용한 형상해석이 요구되며, 초기장력의 도입으로 형성되는 막 구조물의 곡면은 일반적으로 등장력 곡면이다. 따라서 연성 구조물의 해석과 설계는 기존의 강성구조물과는 다른 형상해석, 응력-변형해석, 재단도 작성 및 시공해석의 3단계 해석이 요구되어진다. 본 연구는 재단도 작성 프로그램 NASScut를 이용하여 경계면 곡률의 오차를 최소화 할 수 있는 삼각형 Re-mesh 패턴을 제안하고, 재단도를 작성한다.