• 대한기계학회논문집A
• /
• 제38권11호
• /
• pp.1257-1264
• /
• 2014

최근 제4세대 원자로의 기기 최적설계를 위해 목표파손확률 기반 설계기법에 대한 연구가 활발히 진행되고 있다. 시스템기반코드(System-Based Code, SBC)가 대표적인 예로 설계 혹은 평가 결과는 부분안전계수(Partial Safety Factor, PSF)의 형태로 도출된다. 따라서 부분안전계수는 가동 기간 중 목표파손확률 기반 설계 및 평가를 위한 핵심 요소 가운데 하나이다. 본 연구에서는 특정 목표파손확률 하에서 원주방향 관통균열이 존재하는 배관의 탄소성 균열개시 조건에 대한 부분안전계수 계산 기법을 정립하고 각 평가 인자가 균열개시에 미치는 중요도를 정량적으로 평가하였다. 균열 배관의 J-적분은 GE/EPRI법과 참조응력법으로 계산하였으며, 부분안전계수는 일차 및 이차신뢰도지수법으로 계산하였다. 또한 재료물성치의 통계적 분포 특성이 미치는 영향도 함께 평가하였다.

• Structural Engineering and Mechanics
• /
• 제71권2호
• /
• pp.165-173
• /
• 2019

This paper investigates the probability of failure of reinforced concrete beams for limit state of collapse for flexure and shear. The influence of randomness of the variables on the failure probability is also examined. The Indian standard code for plain and reinforced concrete IS456:2000 is used for the design of beams. Probabilistic models are developed for flexure and shear according to IS456:2000. The loads considered acting on the beam are live load and dead load only. Random variables associated with the limit state equation such as grade of concrete, grade of steel, live load and dead load are identified. Probability of failure is evaluated based on the limit state equation using First Order Reliability Method (FORM). Importance of the random variables on the limit state equations are observed and the variables are accordingly reduced. The effect of the reduced parameters is checked on the probability of failure. The results show the role of each parameter on the design of beam. Thus, the Indian standard guidelines for plain and reinforced concrete IS456:2000 is investigated with the probabilistic and risk-based analysis and design for a simple beam. The results obtained are also compared with the literature and accordingly some suggestions are made.

• Journal of Power Electronics
• /
• 제18권5호
• /
• pp.1567-1576
• /
• 2018

The reliability of grid-connected inverters can be improved by algorithms capable of diagnosing faults in LCL filters. A fault diagnostic method during inverter startup is proposed. The proposed method can accurately generate and monitor information on the peak value and the location of the peak frequency component of the step response of a damped LCL filter. To identify faults, the proposed method compares the evaluated response with the response of a healthy higher-order damped LCL filter. The frequency components in the filter voltage response are first analytically obtained in closed form, which yields the expected trends for the filter faults. In the converter controller, the frequency components in the filter voltage response are computed using an appropriately designed fast Fourier transform and compared with healthy LCL response parameters using a finite state machine, which is used to sequence the proposed startup diagnostics. The performance of the proposed method is validated by comparing analytical results with the simulation and experimental results for a three-phase grid-connected inverter with a damped LCL filter.

• Geomechanics and Engineering
• /
• 제22권6호
• /
• pp.509-518
• /
• 2020

Multi-layered primary linings have been proved to be highly effective for tunneling in severe squeezing grounds. But there still has not existed well-established design method for it. Basically, there are two main critical problems in this method, including determinations of allowable deformation and distribution of support stiffness. In order to address such problems, an attempt to investigate the mechanical response of a circular tunnel with double primary linings is performed in this paper. Analytical solutions in closed form for stresses and displacements around tunnels are derived. In addition, the effectiveness and reliability of theoretical formulas provided are well validated by using the numerical method. Finally, based on the analytical solutions, a parametric investigation on the effects of allowable deformation and distribution of support stiffness on tunnel performance is conducted. Results show that the rock pressure and displacement are significantly affected by these two design parameters. It can be found that rock pressure decreases as either allowable deformation increases or stiffness of the first primary lining decreases, but rock displacement shows an opposite trend. This paper can provide a useful guidance for the design of multi-layered primary linings.

• Composites Research
• /
• 제21권6호
• /
• pp.23-30
• /
• 2008

본 논문에서는 자연 노화가 필라멘트 와인딩으로 제작된 압력용기의 강도 분포와 구조 사용 수명에 미치는 영향을 연구하였다. 자연 노화에 따라 변화되는 섬유 방향 파괴 변형률을 설계 확률 변수로 하는 확률 강도 해석을 수행하였다. 이때 확률강도 해석은 정확한 파열 압력을 예측하기 위해 연속 파손 모드가 고려되었고, 비선형 한계식의 해를 구하기 위해 FORM방법이 이용되었다. 해석을 통해 노화 시간별 파괴 확률 분포 선도를 구하였다. 복합재 구조물의 특성상 재료 물성 및 제작 공정 변수 영향으로 제품의 성능 변동성이 비교적 크게 나타났고, 노화로 인한 압력용기의 파열 압력 저하 현상은 대부분 10년 이내에서 발생하였다. 임의 적층의 복합재 압력 용기를 모델로 하여 수명을 평가한 결과, 파괴 확률 2.5%와 안전율 1.3을 고려한 설계 압력 3,250psi기준으로 약 13년의 사용 수명이 평가되었다.

• 한국지반공학회논문집
• /
• 제23권8호
• /
• pp.117-127
• /
• 2007

사면안정해석은 지반물성의 불확실성을 포함한 많은 불확실한 요인을 내포하는 지반공학적 문제이다. 본 연구에서는 상업용 유한차분해석 프로그램을 이용하여 확률론적 사면안정해석을 수행할 수 있는 절차를 제시하였다. 이 경우 한계상태함수가 명시적인 형태로 표현되지 않기 때문에 한계상태함수를 근사화하기 위하여 인공신경망기법을 활용한 응답면기법을 이용하였으며 파괴확률을 구하기 위해 일차 및 이차신뢰도법과 Monte Carlo simulation을 이용하였다. 제안된 절차의 적용성을 검토하기 위하여 2층 지반의 사면과 Sugar Creek제방사면에 대한 확률론적 사면안정해석을 수행하였다. 해석결과는 제안된 절차의 적정성과 다른 다양한 지반공학 문제로의 확장 적용의 가능성을 보여준다.

• 대한토목학회논문집
• /
• 제10권3호
• /
• pp.7-17
• /
• 1990

본 연구에서는 트러스구조와 아치구조의 부재단면적 및 기하형상을 동시에 최적화하는 효율적인 근사화 방법을 제안하고자 한다. 설계과정 중, 트러스구조에 대해서는 응력제약조건 및 좌굴응력제약조건을 만족하도록 하고, 아치구조에 대해서는 조합응력 제약조건을 만족하도록 하였다. 최적화에 필요한 구조해석의 수를 줄이기 위해 Force Approximation Method를 사용하였다. 초기치에 대한 유한요소해석이 수행된 다음 설계변수인 부재단면적과 절점좌표들에 대한 부재단면력들의 경사를 계산하였고, 그 경사정보를 이용 부재단면력들의 1차 Taylor급수 전개에 근거를 둔 근사구조 해석을 형성하였다. 이동한계법을 적용하였으며, 근사구조해석으로 부터 얻어진 정보에 의해 구조물의 체적을 최소화 하였다. 형상최적화를 위한 제안된 본 방법의 효율성과 신뢰성을 보이기 위해 수치예를 들어 다른 방법들에 의한 결과와 비교하였다. 그 결과 구조해석의 수를 크게 감소시킬 수 있었으며, 구조물 형상최적화에 매우 효율적으로 적용될 수 있음을 알게 되었다.

• 대한토목학회논문집
• /
• 제31권6C호
• /
• pp.259-266
• /
• 2011

기초구조물의 신뢰성 있는 저항계수 산정을 위해서는 충분한 양의 재하시험 결과에 근거한 저항의 분포특성 분석이 선행되어야 한다. 본 연구에서는 베이지안 이론에 근거하여 검증용 정재하시험 결과를 저항의 분포특성 분석에 반영할 수 있는 개선된 해석법을 제안하였고, 이를 통해 기 제안된 국내 타입강관말뚝의 저항계수를 갱신하였다. 측정 지지력이 확인된 정재하시험 결과를 이용하여 저항의 사전 분포특성을 산정하고, 검증용 정재하시험 결과를 우도정보로 고려하여 저항의 사후 분포특성을 평가하였다. 갱신된 저항의 사후 분포특성을 이용하여 일차신뢰도법에 의해 저항계수를 산정하였다. 총 5회의 검증용 재하시험 결과를 반영할 경우, 갱신된 저항계수는 목표신뢰도지수 2.33, 3.0에 대하여 각각 0.27-0.96, 0.19-0.68의 범위를 나타내었다. 본 연구에서 제시된 해석법을 통해 양질의 측정지지력 데이터가 부족하여 신뢰성 있는 저항계수를 산정하기 어려운 경우 현장 검증시험 결과를 반영한 저항계수의 보정이 가능함을 확인하였다.

• 복식
• /
• 제62권4호
• /
• pp.69-80
• /
• 2012

This research aims at the contribution to globalize and modernize the traditional Korean image by comprehending the taste of design that domestic college students have for traditional feminine head ornaments and subsequently elaborate the development of cultural products that are related to these decorative objects. In regards to this research method, the examination on the traditional feminine ornaments was followed through a review of literature and precedent studies and a survey was conducted on the preference about them. After the adoption of final valid responses, an analytical method, PASW 18.0, was used for frequency analysis, technical analysis, reliability, and regression analysis. The results were as follows. First, in the category of tendency analysis for the application of traditional feminine headpiece in fashion cultural products, it was revealed that a taste for the design that meet the satisfaction for both trend and practicability was prominently prevalent. Also, the design that express the individual characteristic was taken as a preferred option. Second, in the preference for the design of traditional feminine headpieces in fashion cultural products, the result indicated that the modern type was preferred in the form of re-creation as long as those products deform the tradition. As for the selective taste for patterns, their preference came in the order of plant, animal, and geometry-abstract types. Especially, for the case of plant and animal patterns, the reinterpreted design of modernized shapes were opted rather than a simply recopied format of the conventional type of the feminist head ornament. Third, for the category of item selection to apply the feminine head ornament in order to design the fashion cultural products, it turned out that people preferred the application to accessory rather than clothing. Lastly, it was found that rarity, harmony with other fashion goods, pattern, and design should be considered when the traditional motif was used for cultural products.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권6호
• /
• pp.2086-2097
• /
• 2021

The current cultural assets are being restored depending on the opinions of experts (craftsmen). We intend to introduce digitalized artificial intelligence techniques, excluding the personal opinions of experts on reconstruction of such cultural properties. The first step toward restoring digitized cultural properties is separation. The restoration of cultural properties should be reorganized based on recorded documents, period historical backgrounds and regional characteristics. The cultural properties in the form of photographs or images should be collected by separating the background. In addition, when restoring cultural properties most of them depend a lot on the tendency of the restoring person workers. As a result, it often occurs when there is a problem in the accuracy and reliability of restoration of cultural properties. In this study, we propose a search method for learning stored digital cultural assets using AI technology. Pagoda was selected for restoration of Cultural Properties. Pagoda data collection was collected through the Internet and various historical records. The pagoda data was classified by period and region, and grouped into similar buildings. The collected data was learned by applying the well-known CNN algorithm for artificial intelligence learning. The pagoda search used Yolo Marker to mark the tower shape. The tower was used a total of about 100-10,000 pagoda data. In conclusion, it was confirmed that the probability of searching for a tower differs according to the number of pagoda pictures and the number of learning iterations. Finally, it was confirmed that the number of 500 towers and the epochs in training of 8000 times were good. If the test result exceeds 8,000 times, it becomes overfitting. All so, I found a phenomenon that the recognition rate drops when the enemy repeatedly learns more than 8,000 times. As a result of this study, it is believed that it will be helpful in data gathering to increase the accuracy of tower restoration.