DOI QR코드

DOI QR Code

Evaluation of Service life for a Filament Wound Composite Pressure Vessel

필라멘트 와인딩 복합재 압력용기의 구조 수명 평가

  • 황태경 (국방과학연구소 기술연구본부 추진기관부) ;
  • 박재범 (국방과학연구소 기술연구본부 추진기관부) ;
  • 김형근 (국방과학연구소 기술연구본부 추진기관부) ;
  • 도영대 (국방과학연구소 기술연구본부 추진기관부)
  • Published : 2008.12.31

Abstract

In this paper, the effect of the natural aging on the strength distribution and structural service life of a Filament Wound (FW) composite pressure vessel was studied. The fiber failure strain, which is varied significantly, was considered as the design random variable and the strength analysis was carried out by probabilistic numerical approach. The progressive failure analysis technique and the First Order Reliability Method (FORM) were embedded in this numerical model. As the calculation results, the probability of failure was obtained for each aging time steps and it is found that the strength degradation in FW composite pressure vessel, due to the natural aging, appears within 10 year-aging-time. As an example of the life prediction under natural aging using arbitrary laminated model, the service lifetime of 13 years was predicted based on the probability of failure of 2.5% and the design pressure of 3,250 psi.

본 논문에서는 자연 노화가 필라멘트 와인딩으로 제작된 압력용기의 강도 분포와 구조 사용 수명에 미치는 영향을 연구하였다. 자연 노화에 따라 변화되는 섬유 방향 파괴 변형률을 설계 확률 변수로 하는 확률 강도 해석을 수행하였다. 이때 확률강도 해석은 정확한 파열 압력을 예측하기 위해 연속 파손 모드가 고려되었고, 비선형 한계식의 해를 구하기 위해 FORM방법이 이용되었다. 해석을 통해 노화 시간별 파괴 확률 분포 선도를 구하였다. 복합재 구조물의 특성상 재료 물성 및 제작 공정 변수 영향으로 제품의 성능 변동성이 비교적 크게 나타났고, 노화로 인한 압력용기의 파열 압력 저하 현상은 대부분 10년 이내에서 발생하였다. 임의 적층의 복합재 압력 용기를 모델로 하여 수명을 평가한 결과, 파괴 확률 2.5%와 안전율 1.3을 고려한 설계 압력 3,250psi기준으로 약 13년의 사용 수명이 평가되었다.

Keywords

References

  1. C. Chamis, 'Probabilistic Composite Mechanics Assurance for Better Cheaper Faster Products,' AIAA-98-1939, 1998
  2. L. Minnetyan and C. Chamis, 'Design of Composite Structures with Uncertainties,' AIAA-2002-1475, 2002
  3. J. Kerr and J. Haskins, 'Effect of 50,000 Hours of Thermal Aging on Graphite/Epoxy and Graphite/Polymid Composites,' AIAA-82-0657, 1982, pp. 101-108
  4. 서울대학교 부속 농업개발연구소, 'Environmental Effects on the Carbon Fiber/Epoxy Composite,' 한국화이바 용역보고서, 1986
  5. J. F. Wlodarski, G. Pergantis, J. Mulkern and D. Kleinmeyer, 'Environmental Effects on the Durability of Filament Wound Composite Structures,' AIAA-96-2639, July 1-3, 1996, pp. 1-12
  6. 홍성혁, 신광복, 정발, 황태경, 김종식, 김천곤, 홍창선, '가속노화 시험을 이용한 복합재료의 환경 영향에 대한 장시간 성능 예측,' 한국복합재료학회지, 11권, 5호, 1998, pp. 1-13
  7. 충남대학교 공과대학 산업기술연구소, '국산압력용기 시편의 가속 노화 환경시험,' 한국화이바 용역보고서, 2000
  8. M. Taylor and Y. Lin, 'Aging Effects on the Interlaminar Shear Strength of High Performance Composites,' Journal of Aircraft, Sept.-Octo. Vol. 40, No. 5, 2003, pp. 971-976 https://doi.org/10.2514/2.6882
  9. R. Trabocco and M. Stander, 'Effect of Natural Weathering on the Mechanical Properties of Graphite/Epoxy Composite Materials,' ASTM STP 602, 1975, pp. 67-84
  10. J. Faddoul, 'Ten Year Environmental Test of Glass Fiber/Epoxy Pressure Vessels,' AIAA-85-1198, 1985, pp. 1-9
  11. H. Babel, B. Vickers and D. Thomas, 'Sustained Load Behavior of Graphite/Epoxy Metal-Lined Pressure Vessels for Long-Life Space Applications,' AIAA-89-2644, 1989, pp. 1-8
  12. Aging and Surveillance (A&S) Program for Peacekeeper Stage I, Morton Thiokol, Inc., 1997
  13. 황태경, 박재범, 김형근, 도영대, '자연 노화에 따른 카본에폭시 압력 용기의 섬유 인장 강도 변화,' 한국복합재료학회지, 20권, 2호, 2007, pp.1-9
  14. Composite Materials Handbook, Volume1. Polymer Matrix Composites Guidelines for Characterization of Structural Materials, MIL-HDBK-17-1F, June, 2002
  15. Tae-Kyung Hwang, Chang-Sun Hong and Chun-Gon Kim, 'Probabilistic Deformation and Strength Prediction for a Filament Wound Pressure Vessel,' Composites Part B: engineering, Vol.34, 2003, pp.481-497
  16. K. Y. Chang, S. Liu and F. K. Chang, 'Damage Tolerance of Laminated Composites containing an Open Hole and Subjected to tensile Loadings,' Journal of Composite materials, Vol.25, 1991, pp.274-300 https://doi.org/10.1177/002199839102500303
  17. A. M. Hasofer and N. C. Lind, 'Exact and Invariant Second-Moment Code Format,' Journal of the engineering Mechanics Division, ASCE, 100(EM), 1974, pp. 111-121