• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.509-512
• /
• 1999

Ferroelectric Sr$_2$(Nb, Ta)$_2$O$_{7}$(SNTO), La$_2$Ti$_2$O$_{7}$(LTO) thin films were prepared by sol-gel processes. SNTO, LTO thin films were spin-coated on Pt/TiO$_2$/SiO$_2$/Si(100). Pt/Ti/SiO$_2$/Si(100). PT/ZrO$_2$/SiO$_2$/Si(100) substrates. After multiple coating, dried thin films were heat-treated for decomposition of residual organics and crystallization. Dielectric and other relevant electrical properties were measured and the results showed a little possibility in ferroelectric gate random access memory devices.ces.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2002년도 동계연구발표회 논문개요집
• /
• pp.188-189
• /
• 2002

One of the current goals in memory device developments is to realize a nonvolatile memory, i.e., the stored information maintains even when the power is turned off. The representative candidates for nonvolatile memories are magnetic random access memory (MRAM) and ferroelectric random access memory (FRAM). In order to achieve a high density memory in MRAM device, the external magnetic field should be localized in a tiny cell to control the direction of spontaneous magnetization. (omitted)

• Transactions on Electrical and Electronic Materials
• /
• 제12권6호
• /
• pp.258-261
• /
• 2011

A ferroelectric $(Bi,La)_4Ti_3O_{12}$ (BLT) thin film fabricated by the pulsed-DC sputtering method was evaluated on a cell structure to check its compatibility to high density ferroelectric random access memory (FeRAM) devices. The BLT composition in the sputtering target was $Bi_{4.8}La_{1.0}Ti_{3.0}O_{12}$. Firstly, a BLT film was deposited on a buried Pt/$IrO_x$/Ir bottom electrode stack with W-plug connected to the transistor in a lower place. Then, the film was finally crystallized at $700^{\circ}C$ for 30 seconds in oxygen ambient. The annealed BLT layer was found to have randomly oriented and small ellipsoidal-shaped grains (long direction: ~100 nm, short direction: ~20 nm). The small and uniform-sized grains with random orientations were considered to be suitable for high density FeRAM devices.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.180-180
• /
• 2003

FRAM (Ferroelectric Random Access Memory)은 DRAM(Dynamic Random Access Memory)in 커패시터 재료을 상유전체 물질에서 강유전체 물질로 대체하여 전원 공급이 차단되어도 정보를 기억할 수 있고, 데이터의 고속처리가 가능하고 저소비전력과 집적화가 뛰어난 차세대 메모리 소자이다. 본 연구에서는 n-Well/P-Si(100) 기판위에 $Y_2$O$_3$ 박막을 중간층 (buffer layer)으로 사용하여 (Bi,La) Ti$_3$O$_{12}$ (BLT) 강유전체 박막을 졸-겔 방법으로 형성하여 MFM(I)S(Metal Ferroelectric Metal (Insulation) Silicon) 구조의 커패시터 및 전계효과형 트랜지스터(Field Effect Transistor) 소자를 제작하였다. 제작된 소자에 대해 형상학적, 전기적 특성을 조사, 분석하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.335-338
• /
• 1998

Ferroelectric Sr$_2$(Nb,Ta)$_2$O$_{7}$ (SNTO) thin films were prepared by chemical solution deposition processes. SNTO thin films were spin-coated on Pt/Ti/SiO$_2$/(100)Si substrates. After multiple coating, dried thin films were heat-treated for decomposition of residual organics and crystallization. B site-rich impurity phase, i.e. [Sr(Nb,Ta)$_2$O$_{6}$], was found after annealing, where its appearance was dependent on process temperature indicating the possible reaction with substrate. Dielectric and other relevant electrical properties were measured and the results showed a little possibility in ferroelectric gate random access memory devices.s.s.

• 마이크로전자및패키징학회지
• /
• 제30권3호
• /
• pp.73-77
• /
• 2023

본 연구에서는 서로 다른 강유전성 물질을 활용하여 Multi-level FeRAM (Ferroelectrics random access memory) 소자에 대한 구조를 제시하였으며, 이를 검증하기 위해 Simulation을 통한 C-V 분석을 수행하였습니다. Multi-level 소자를 구현하기 위해 두 가지 서로 다른 물성을 가진 강유전체를 동일한 하부 전극 위에 나란히 증착하고, 이후 게이트 전극을 위에 올린 MFM (Multi-Ferroelectric Material) 구조를 제안하였습니다. 두 강유전체가 서로 다른 전압 조건에서 분극 현상 (Polarization)을 나타내는 것을 바탕으로, 두 개의 물질 중 한 개만 polarization 되었을 때와 두 개 모두 polarization 되었을 때의 상황을 C-V peak 분석을 통해 확인하여 Multi-level 동작을 구현할 수 있음을 확인하였습니다. 더불어, 제시한 구조를 반도체 제조 공정을 활용하여 구현하는 방법을 공정 simulation을 통해 검증하였습니다. 이러한 결과는 하나의 메모리 셀에서 여러 상태 값을 저장할 수 있음을 의미하며, 이는 메모리의 집적도를 크게 향상시킬 수 있는 새로운 구조체로서의 가능성을 의미합니다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권3호
• /
• pp.128-132
• /
• 2004

The perovskite ferroelectric materials of the PZT, SBT and BST series will attract much attention for application to ULSI devices. Among these materials, the BST ($Ba_0.6$$Sr_0.4$/$TiO_3$) is widely considered the most promising for use as an insulator in the capacitors of DRAMS beyond 1 Gbit and high density FRAMS. Especially, BST thin films have a good thermal-chemical stability, insulating effect and variety of Phases. However, BST thin films have problems of the aging effect and mismatch between the BST thin film and electrode. Also, due to the high defect density and surface roughness at grain boundarys and in the grains, which degrades the device performances. In order to overcome these weakness, we first applied the chemical mechanical polishing (CMP) process to the polishing of ferroelectric film in order to obtain a good planarity of electrode/ferroelectric film interface. BST ferroelectric film was fabricated by the sol-gel method. And then, we compared the surface characteristics before and after CMP process of BST films. We expect that our results will be useful promise of global planarization for FRAM application in the near future.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2009년도 춘계학술대회 논문집
• /
• pp.110-110
• /
• 2009

최근 차세대 비휘발성 메모리(NVM) 기술은 메모리의 성능과 기존의 한계점을 효과적으로 극복하며 활발한 연구를 통해 비약적으로 발전하고 있으며 특히, phase-change random access memory (PRAM)은 ferroelectric random access memory (FeRAM)과 magneto-resistive random access memory (MRAM)과 같은 다른 NVM 소자와 비교하여 기존의 DRAM과 구조적으로 비슷하고 상용화가 빠르게 진행될 수 있을 것으로 예상되는 바, PRAM에 사용되는 상변화 물질의 식각을 수행하고 X-ray photoelectron spectroscopy (XPS)를 통해 표면의 열화현상을 관찰하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2001년도 춘계학술발표강연 및 논문개요집
• /
• pp.114-114
• /
• 2001

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.85-86
• /
• 2007

A poly(vinylidene fluoride-trifluoroethyene) (P(VDF-TrFE)) copolymer thin film having ${\beta}$ phase was prepared by sol-gel method. The electrical properties of the film were studied to evaluate the possibility for appling to a ferroelectric random access memory. In order to characterize its electrical properties, we produced a MFS (metal-ferroelectric-semiconductor) structure by evaporation of Au electrodes. The C-V (capacitance-voltage) measurement revealed that the Au/P(VDF-TrFE)/Si structure with a 4 wt% film had a memory window width of about 0.5V for a bias voltage sweep of 1V.