• Journal of Radiation Protection and Research
• /
• v.43 no.1
• /
• pp.29-38
• /
• 2018

Background: Radon contributing about 42% of annual average dose, mainly comes from soil. In this paper, standard measurement procedures for soil radon exhalation rate are suggested and their measurement uncertainties are analyzed. Materials and Methods: We used accumulation method for estimating surface exhalation rate. The closed-loop measurement system was made up with a RAD7 detector and a surface chamber. Radon activity concentrations in the system were observed as a function of time, with data collection of 5 and 15-minute and the measurement time of 4 hours. Linear and exponential fittings were used to obtain radon exhalation rates from observed data. Standard deviations of measurement uncertainties for two approaches were estimated using usual propagation rules. Results and Discussion: The exhalation rates (E) from linear approach, with 30 minutes measurement time were $44.8-48.6mBq{\cdot}m^{-2} {\cdot}s^{-1}$ or $2.14-2.32atom{\cdot}cm^{-2}{\cdot}s^{-1}$ with relative measurement uncertainty of about 10%. The contributions of fitting parameter A, volume (V) and surface (S) to the estimated measurement uncertainty of E were 59.8%, 30.1% and 10.1%, in average respectively. In exponential fitting, at 3-hour measurement we had E ranged of $51.6-69.2mBq{\cdot}m^{-2} {\cdot}s^{-1}$ or $2.46-3.30atom{\cdot}cm^{-2}{\cdot}s^{-1}$ with about 15% relative uncertainty. Fitting with 4-hour measurement resulted E about $51.3-68.2mBq{\cdot}m^{-2} {\cdot}s^{-1}$ or $2.45-3.25atom{\cdot}cm^{-2}{\cdot}s^{-1}$ with 10% relative uncertainty. The uncertainty contributions in exponential approach were 75.1%, 13.4%, 8.7%, and 2.9% for total decay constant k, fitting parameter B, V, and S, respectively. Conclusion: In obtaining exhalation rates, the linear approach is easy to apply, but by saturation feature of radon concentrations, the slope tends to decrease away from the expected slope for extended measurement time. For linear approach, measurement time of 1-hour or less was suggested. For exponential approach, the obtained exhalation rates showed similar values for any measurement time, but measurement time of 3-hour or more was suggested for about 10% relative uncertainty.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.1
• /
• pp.67-79
• /
• 2018

This paper provides theoretical deformation of lean concept and its application for usage of building information modeling (BIM) process. Recently, much research is focused on application of lean concept for more efficient usage of BIM. The lean theory and its basic function and feature is based on manufacturing industry. The manufacturing process can be improved by process re-engineering steps of lean concept which consist of the steps of value, value stream, flow, pull, perfection. However manufacturing process and construction process has different characteristics. Due to the differences, five steps of the traditional lean's process re-engineering can't be directly applied to the BIM based engineering process. In order to solve this problem, we conduct analysis on the characteristics of the manufacturing process and BIM based engineering. We propose modified and expanded concept of lean for process re-engineering and the modified theory was applied to the mechanical, electrical and plumbing (MEP) coordination process. Through the proposed 8 steps of methodology, 2D based process was changed to integrated and using BIM based MEP coordination process. In addition, the results showed the potentiality of cost reduction and process improvement. The results of this study can be a foundation for the theoretical combination of lean and a variety part of construction engineering process.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.5
• /
• pp.895-907
• /
• 2020

With the recent increasing influence of multimedia content other than the text-based content, services that help to process information in content brings us great convenience. These services' representative features are searching and masking the sensitive data. It is not difficult to find the solutions that provide searching and masking function for text information and image. However, even though we recognize the necessity of the technology for searching and masking a part of the audio data, it is not easy to find the solution because of the difficulty of the technology. In this study, we propose web application that provides searching and masking functions for audio data using audio partitioning method. While we are achieving the research goal, we evaluated several speech to text conversion APIs to choose a proper API for our purpose and developed regular expressions for searching sensitive information. Lastly we evaluated the accuracy of the developed searching and masking feature. The contribution of this work is in design and implementation of searching and masking a sensitive information from the audio data by the various functionality proving experiments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.10
• /
• pp.1422-1432
• /
• 1993

Nonlinear mapping function of the HCNN( Hidden Control Neural Network ) can change over time to model the temporal variability of a speech signal by combining the nonlinear prediction of conventional neural networks with the segmentation capability of HMM. We have two things in this paper. first, we showed that the performance of the HCNN is better than that of HMM. Second, the HCNN with its prediction error measure given by weighted distance is proposed to use suitable distance measure for the HCNN, and then we showed that the superiority of the proposed system for speaker-independent speech recognition tasks. Weighted distance considers the differences between the variances of each component of the feature vector extraced from the speech data. Speaker-independent Korean digit recognition experiment showed that the recognition rate of 95%was obtained for the HCNN with Euclidean distance. This result is 1.28% higher than HMM, and shows that the HCNN which models the dynamical system is superior to HMM which is based on the statistical restrictions. And we obtained 97.35% for the HCNN with weighted distance, which is 2.35% better than the HCNN with Euclidean distance. The reason why the HCNN with weighted distance shows better performance is as follows : it reduces the variations of the recognition error rate over different speakers by increasing the recognition rate for the speakers who have many misclassified utterances. So we can conclude that the HCNN with weighted distance is more suit-able for speaker-independent speech recognition tasks.

• Journal of the Korean Geographical Society
• /
• v.29 no.2
• /
• pp.183-200
• /
• 1994

This research aims to introduce the theoretical basis of the studies of tourism resources, by review the research trends of tourism resources in the geography field. The geographical approaches to tourism resouces can be subdicided into 3 categories according to the subject. First, the classification of tourism resource types and the approach on the spatial distribution may be enumerated. This subject has been the object of the most interest and discussion to the geographers for tourism up to now. And from the viewpoint of contents, it has been developed by classifying the types of tourism resoures, which is based on the establishment of the range and standard of tourism resources and the spatial classification of types based on the distribution feature of the area. Second, the approach about cognition, preference and interpretation on the tourism resources as the background to induce tourism phenomenon and decide the tourism destination. Judging from the fact that most of this subject is starting from the behavioural study and that the right understanding and interpretation of tourism resource is the important factor to decide the preference degree of tourists, we have to have much interest about the field of tourism geoaraphy. Third, the development of tourism resources which is showing the active study recently and its influence and effect attendant upon it may be enumerated. Today, as the economic value of tourism is become important internationally, tourism resources are recognized as the important factor to induce the industrialization of tourism. And in the series of analytical studies related to it the interest has been transferred from the economic benefit analysis attendant upon tourism development including tourism resource and to the cultural, educational, environmental and psychological influence, etc. As the result of composite examination, for the geographical studies about tourism resources, the spatial scale and the contents are being subdivided and specialized. And in the side of subject and method of study, it is developing into the positive study based on the concrete data and the measuring and analytical frame.

• The Korean Journal of Physiology
• /
• v.24 no.2
• /
• pp.331-344
• /
• 1990

What makes glucose transport function sensitive to insulin in one cell type such as adipocyte, and insensitive in another such as liver cells is unresolved question at this time. Recently it is known that insulin stimulates glucose transport in adipocytes largely by redistributing transporter from the storage pool that is included in a low density microsomal fraction to plasma membrane. Therefore, insulin sensitivity may depend upon the relative distribution of gluscose transporters between the plasma membrane and in an intracellular storage compartment. In hepatocytes, the subcellular distribution of glucose transporter is less well documented. It is thus possible that the apparent insensitivity of the hepatocyte system could be either due to lack of the constitutively maintained, intracellular storage pool of glucose transporter or lack of insulin-mediated transporter translocation mechanism in this cell. In this study, I examined if any intracellular glucose transporter pool exists in hepatocytes and this pool is affected by insulin. The results obtained summarized as followings: 1) Distribution of subcellular fractions of hepatocyte showed that there are $24.9{\pm}1.3%$ of plasma membrane, $36.9{\pm}1.7%$ of nucleus-mitochondria enriched fraction, $23.5{\pm}1.2%$ of lysosomal fraction, $9.6{\pm}1.0%$ of high density microsomal fraction and $4.9{\pm}0.5%$ of low density microsomal fraction. 2) In adipocyte, there were $29.9{\pm}2.6%$ of plasma membrane, $19.4{\pm}1.9%$ of nucleus-mitochondria enriched fraction, $26.7{\pm}1.8%$ of high density microsomal fraction and $23.9{\pm}2.1%$ of low density microsomal fraction. 3) Surface labelling of sodium borohydride revealed that plasma membrane contaminated to lysosomal fraction by $26.8{\pm}2.8%$, high density microsomal fraction by $8.3{\pm}1.3%$ and low density microsomal fraction by $1.7{\pm}0.4%$ respectively. 4) Cytochalasin B bound to all of subcellular fractions with a Kd of $1.0{\times}10^{-6}M$. 5) Photolabelling of cytochalasin B to subcellular fractions occurred on 45 K dalton protein band, a putative glucose transporter and D-glucose inhibited the photolabelling. 6) Insulin didn't affect on the distribution of subcellular fractions and translocation of intracellular glucose transporters of hepatocytes. 7) HEGT reconstituted into hepatocytes was largely associated with plasma membrane and very little was found in low density microsomal fraction which equals to the native glucose transporter distribution. Insulin didn't affect on the distribution of exogeneous glucose transporter in hepatocytes. From the above results it is concluded that insulin insensitivity of hepatocyte may due to lack of intracellular storage pool of glucose transporter and thus intracellular storage pool of glucose transporter is an essential feature of the insulin action.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.63-72
• /
• 2006

The design in modern industrial society is the core of corporate administrational strategy and a factor that determines the competitiveness of a country. And the process of purchasing products is the matter related to the awareness of design which expresses the desire to own the design product that consumers prefer, implying that the aesthetic feature of product has become a critical characteristics of product design rather than the technical function of product. In this regard, the development of product design with a new dimension is urgently called for, by analyzing and shedding light on the aesthetic features of factors related to the preference of consumers. This study considers the preceding studies on the aesthetic factors and the reaction of customers to the product design to figure out the importance of factors related to the preference of customers, in an effort to shed light on the aesthetic factors that affect the customers' preference of product and the evaluation of product. In addition to that, this study investigated the preference that Korean and Chinese customers display toward the product and assessed the aesthetic features of preferred product in order to come to the conclusion from the experiment and analysis on how much effect the aesthetic factors and the aesthetic factors by product have on the preference of customers. Therefore, this study tries to propose the data that can be useful for the design of product targeted for consumers in Korea and China, by shedding light on what aesthetic factors that products preferred by consumers in Korea and China have and how much effect such factors have on the preference of consumers in an attempt to provide the guideline on the aesthetic factors of the product design.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.283-292
• /
• 2006

The Plastic material had been developed in the middle of the 19th century as an alternative material. Along with the development of the electrical engineering industry, it cropped up into center stage as an effective material and has increasingly expanded its use. As such, the plastic material has bound deep-seated ties with the design activities of industrial products, coming into the main material for a variety of industrial designs. Despite its dose affinity to design function in terms of its materialistic property, we have rarely seen examples of intensive study on the realtionship between plastics and designs. This study aims to find the importance that the substance affects industrial products in designs along with the development of plastic materials. With the objective in mind, we made a review of the streamline stylishness that had flourished in the twenties and thirties of the 19th century. Through this study, we understand that the plastic material has a close realtionshop with design activities in three different aspects. First, its amorphous state of nature makes it possible to change into any shape one desires in plastic surgery, which feature in turn influences the moulding of any design forms. Second, the plastic material is best suited to mass-manufacture, which induces to reduce the cost of production. Hence, the expansion of design industry. Third, the plastic material allows the multiple variety of colors, sensitivity, gloss and patterns and infinitely large possibility ranging from natural senses to human senses with the result that numberless diversity of designs cdould come into being.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.8
• /
• pp.55-63
• /
• 2017

Due to spatial problems and system size,conventional measurement methods used to acquire the information needed for existing electrical energy and management have been limited to new buildings or areas where replacement is possible. This electric load management method is problematic when applying it to energy and safety management of vulnerable areas or existing homes or offices. The problem with installing a measurement module in every branch is that the system is too large. Even if the measurement module is installed, the type of load is not recognized, and efficient management is not performed. In particular, it is very difficult to apply it to traditional markets and backward facilities in Korea. In this paper, we apply NIALM technology and arc detection technology to solve these problems and verify the feasibility of NIALM for normal arc generation. Also, based on the verification results, we propose a new smart home safety management system that can effectively manage electrical safety and that can be applied to conventional market and existing home safety management systems. The proposed system conducts a comparative performance test with an existing safety management system. In addition, it achieves 95% or more load recognition for four loads, which is impossible in 40% of the existing systems, and the arc detection function was confirmed.

• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.3
• /
• pp.151-158
• /
• 2019

Patients with disabilities from various reasons such as disasters, injuries or chronic illness or elderly with limited body motion range due to aging are recommended to participate in rehabilitation programs at hospitals. But typically, it's not as simple for them to commute without help as they have limited access outside of the home. Also, regarding the perspectives of hospitals, having to maintain the workforce and have them take care of the rehabilitation sessions leads them to more expenses in cost aspects. For those reasons, in this paper, a home-based remote rehabilitation system using motion recognition is developed without needing help from others. This system can be executed by a personal computer and a stereo camera at home, the real-time user motion status is monitored using motion recognition feature. The system tracks the joint range of motion(Joint ROM) of particular body parts of users to check the body function improvement. For demonstration, total of 4 subjects with various ages and health conditions participated in this project. Their motion data were collected during all 3 exercise sessions, and each session was repeated 9 times per person and was compared in the results.