• Nuclear Engineering and Technology
• /
• v.56 no.7
• /
• pp.2641-2649
• /
• 2024

Effective management of slightly used nuclear fuel (SUNF) is crucial for both technical and public acceptance reasons. SUNF management, radiotoxicity risk, and associated financial investment and technological capabilities are major concerns in nuclear power production. Reducing the volume of SUNF can simplify its management, and one possible solution is utilizing small modular reactors (SMR) and advanced fuel designs like those with thorium. This research focuses on studying the neutronic performance and radionuclide inventory of three different thorium fuel configurations. The mass of fissile material in thorium-based fuel significantly impacts Kinf, burn-up, and neutron energy spectrum. Compared to uranium, thorium as a fuel produces far fewer transuranic elements and less long-lived fission products (LLFPs) at the end of the core cycle (EOC). However, certain fission product elements produced from thorium-based fuel exhibit higher radioactivity at the beginning of the core cycle (BOC). Physical separation of thorium and uranium in the fuel block, like seed-and-blanket units (SBU) and duplex fuel designs, generate less radioactive waste with lower radioactivity and longer cycle lengths than homogeneous or mixed thorium-uranium fuel. Furthermore, the SBU and duplex feel designs exhibit comparable neutron spectra, leading to negligible differences in SUNF production between the two.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.13 no.1
• /
• pp.29-29
• /
• 1988

In the past decade, considerable effort has been devoted unsuccessfully to the development of information technology (IT) evaluation frameworks in the information systems area. Based on the literature review in this area and the decision analysis field, two competing evaluation frameworks are developed in this study: the direct evaluation framework and the indirect evaluation framework. A case study on Firm K shows that the latter is more practically efficient and theoretically appropriate but requires the adequate training for practitioners in order not to get confused the weight of an evaluation variable with the product of this weight and the score of the variable. Another finding is that Weill's conversion effectiveness is neither possible nor necessary to measure in the process of evaluating an IT although it is in theory an important concept.

• Particle and aerosol research
• /
• v.11 no.4
• /
• pp.107-113
• /
• 2015

SBA-16 (Santa Barbara Amorphous) was synthesized over supported $TiCl_4/MgCl_2$. Due to its high surface area and excellent morphological performance, it was expected to form the bi-supported catalytic system and be used for ethylene polymerization. Polymerization of ethylene was carried out at atmospheric pressure using hexane as solvent and triethylaluminium as cocatalyst. ICP, FTIR, DSC, TG-DTA were used to characterize polyethylene and catalyst product. Optimum conditions for ethylene polymerization were found to be 100 mL hexane, Al/Ti molar ratio of 160 and 1 h polymerization at $60^{\circ}C$. The activity of 396.76 kg PE/mol Ti.h.atm was achieved. Melting point of the obtained polymer was in the range of $132-135^{\circ}C$ and the highest degree of crystallization was 46%.

• Natural Product Sciences
• /
• v.24 no.3
• /
• pp.155-158
• /
• 2018

A new flavonol derivative, meliglabrin (1) along with three known flavonols, ternatin (2), meliternatin (3), and 5,4'-dihydroxy-3,7,3'-trimethoxyflavon (4) were isolated from the leaves of Melicope glabra (Blume) T.G. Hartley. Their structures were determined using extensive spectroscopic methods, including UV, IR, HRESIMS, 1D and 2D NMR. Compounds 1 - 4 were evaluated for their cytotoxicity against murine leukemia P-388 cells, compound 4 showed moderate activity.

• Food Science of Animal Resources
• /
• v.44 no.4
• /
• pp.739-757
• /
• 2024

Camel milk plays a critical role in the diet of peoples belongs to the semi-arid and arid regions. Since prehistoric times, camel milk marketing was limited due to lacking the processing facilities in the camel-rearing areas, nomads practiced the self-consumption of raw and fermented camel milk. A better understanding of the techno-functional properties of camel milk is required for product improvement to address market and customer needs. Despite the superior nutraceutical and health promoting potential, limited camel dairy products are available compared to other bovines. It is a challenging impetus for the dairy industry to provide diversified camel dairy products to consumers with superior nutritional and functional qualities. The physicochemical behavior and characteristics of camel milk is different than the bovine milk, which poses processing and technological challenges. Traditionally camel milk is only processed into various fermented and non-fermented products; however, the production of commercially important dairy products (cheese, butter, yogurt, and milk powder) from camel milk still needs to be processed successfully. Therefore, the industrial processing and transformation of camel milk into various products, including fermented dairy products, pasteurized milk, milk powder, cheese, and other products, require the development of new technologies based on applied research. This review highlights camel milk's processing constraints and techno-functional properties while presenting the challenges associated with processing the milk into various dairy products. Future research directions to improve product quality have also been discussed.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.1
• /
• pp.13-30
• /
• 2024

Swietenia mahagoni is one of the commercial timbers in Indonesia. Mahogany heartwood is an important characteristic as it relates to the natural durability and aesthetics of the wood. Lipophilic extractives are known to be involved in the heartwood formation process. Therefore, this study aims to determine the lipophilic compounds associated with heartwood formation. The n-hexane extract from sapwood and heartwood samples (1 to 5 years) was analyzed by gas chromatography-mass spectrometry. The results showed that the content of n-hexane extract ranged from 0.76% to 2.45% based on dry wood. The main group of compounds identified in the lipophilic fraction consisted of sterols (β-sitosterol, stigmasterol, campasterol, and cyclolaudenol), fatty acids (palmitic, oleic, linoleic, and stearic acid), and hydrocarbons (pentadecane, 1-octadecane, hexadecane, cyclotetracosane, cycloeicosane, and cyclooctacosane) after heartwood formation. In addition, the hydrocarbon fraction was the largest, followed by sterols, fatty acids, and 1-heneicosanol. In the radial variation, the distribution of fatty acids was greater in the sapwood than in the heartwood (4-year-old). However, the reverse pattern was found at the age of 5 years. The lipophilic fraction was generally more abundant in the heartwood compared to the sapwood, especially at 5 years of age, with much higher levels than when the heartwood was forming (4 years). These findings show that when the heartwood formation begins, the lipid composition was not fully metabolized at the beginning of heartwood formation compared to 5-year-old trees.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.6
• /
• pp.903-912
• /
• 2016

Morphological and anatomical evaluation of grafted P. merkusii have been undertaken to obtain the information about compatible and incompatible symptoms of 18 years old grafts based on morphological observation and microscopic analysis. Samples of compatible and incompatible grafts were obtained from previous research conducted by the Silviculture Departement Team in 1994. Result showed that compatible grafts have normal stem form and secondary growth (diameter growth), but some abnormality symptoms like undulated pattern of annual growth rings, phloem thickening and abnormality resin ducts in inner and middle parts of the union area occurred. Incompatible ones showed abnormality of the stem form, cortex-bark necrosis and swelling in the union area. Microscopic observation showed abnormality of all parts of the union, undulated pattern of annual growth rings, phloem thickening, abnormal resin ducts, low numbers and discontinuity of vascular elements in the union area.

• Archives of Pharmacal Research
• /
• v.29 no.3
• /
• pp.199-202
• /
• 2006

From the leaves of Goniothalamus tenuifolius, a new natural product namely 3'-hydroxy-3,5,7,4'-tetramethoxyflavone (1) was isolated, along with seven other known compounds (2-8). Each of these isolates was evaluated for free radical scavenging activity on the DPPH decoloration test. The data obtained in this study suggested that the ortho 3',4'-diphenolic structure was essential for the activity of these flavonol derivatives.

• Journal of Engineering Education Research
• /
• v.15 no.5
• /
• pp.3-7
• /
• 2012

Utsunomiya University started a 3-year project to develop an education program for postgraduate students to cultivate leadership spirits. The program is centered on a PBL in which each group of students is required to find an engineering or social problem themselves and start a project to solve the problem. Projects vary widely, from a straight product development to a summer program for children or local area development. Student groups are advised by senior engineers from industries. They give advice as to how a project should be managed and run, but will not give instructions. The PBL is compulsory for all students in the engineering master course students. The new education program also includes a series of lectures by engineers to show engineers' job, activities, and career in the industry. Internship programs are also provided, in which students will be given opportunities to actively apply their knowledge and skills to real engineering tasks offered by the industry. The students are expected to gain something more than just experiences.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.6
• /
• pp.907-916
• /
• 2020

This research was conducted to investigate the linear expansion and resistance properties of a composite board (com-ply). This board was made of medium-density fiberboard (MDF) laminated using avocado (Persea americana), mahogany (Swietenia mahogani), and pine (Pinus merkusii) veneers. These three types of veneers were laminated on both surfaces of the MDF using adhesives, namely, epoxy and isocyanate. Glue (250 g·m^-2) was spread on the surface, followed by cold press for 3 h with an applied pressure of 15 kg·cm^-2. The research result revealed that com-ply exhibited an increased dimensional stability compared with MDF, indicated by reduction in water absorption, thickness swelling, and linear expansion. The com-ply made of the pine veneer and isocyanate adhesive exhibited high density, water absorption, thickness swelling, and screw withdrawal load. The com-ply that exhibited the strongest resistance to drywood termite attacks was the one made of the mahogany veneer and isocyanate adhesive. Moreover, the com-ply that exhibited the biggest weight loss (3.6 %) was made of the pine veneer and epoxy adhesive. The results of this research may facilitate in manufacturing com-ply using the selected veneer and adhesive without the application of hot press.