• 한국산학기술학회논문지
• /
• 제13권7호
• /
• pp.2858-2864
• /
• 2012

곡선보 (curved beam)의 내평면 모멘트 및 등분포하중 하에서 평면내 (in-plane) 좌굴 (buckling)을 미분구적법(DQM)을 이용하여 해석하였다. 다양한 경계조건 (boundary conditions)과 굽힘각 (opening angles)에 따른 임계모멘트 및 임계하중을 계산하였다. DQM의 해석결과는 해석적 해답 (exact solution) 결과와 비교하였으며, DQM은 적은 요소 (grid points)를 사용하여 정확한 해석결과를 보여주었다. 두 경계조건(고정-고정, 단순지지-고정)하에서 새 결과를 또한 제시하였다.

• Structural Engineering and Mechanics
• /
• 제34권4호
• /
• pp.399-416
• /
• 2010

The purpose of this paper is to utilize the numerical assembly method (NAM) to determine the exact natural frequencies and mode shapes of a multi-step beam carrying multiple rigid bars, with each of the rigid bars possessing its own mass and rotary inertia, fixed to the beam at one point and supported by a translational spring and/or a rotational spring at another point. Where the fixed point of each rigid bar with the beam does not coincide with the center of gravity the rigid bar or the supporting point of the springs. The effects of the distance between the "fixed point" of each rigid bar and its center of gravity (i.e., eccentricity), and the distance between the "fixed point" and each linear spring (i.e., offset) are studied. For a beam carrying multiple various concentrated elements, the magnitude of each lumped mass and stiffness of each linear spring are the well-known key parameters affecting the free vibration characteristics of the (loaded) beam in the existing literature, however, the numerical results of this paper reveal that the eccentricity of each rigid bar and the offset of each linear spring are also the predominant parameters.

• 한국안전학회지
• /
• 제17권4호
• /
• pp.189-195
• /
• 2002

I-단면 곡선보 (curved beam)의 모멘트 하중 하에서 비틀림(warping)을 포함한 평면외 (out-of-plane)의 좌굴을 미분구적법 (DQM)을 이용하여 해석하였다. 다양한 경계조건(boundary conditions) 및 굽힘각(opening angles)에 따른 임계모멘트 (critical moments)를 계산하고, DQM의 해석결과는 해석적 해답 (exact solution) 과 비교 분석하였다. DQM은 적은 요소(grid points)를 사용하여 정확한 해석결과를 보여주었고, 두 경계조건 (고정-고정, 고정-단순지지)하에서 새로운 결과 또한 제시하였다.

• 한국도로학회논문집
• /
• 제18권2호
• /
• pp.51-60
• /
• 2016

PURPOSES : The applicability of the mechanics-based similarity concept (suggested by Feng et al.) for determining scaled variables, including length and load, via laboratory-scale tests and discrete element analysis, was evaluated. METHODS: Several studies on the similarity concept were reviewed. The exact scaling approach, a similarity concept described by Feng, was applied in order to determine an analytical solution of a free-falling ball. This solution can be considered one of the simplest conditions for discrete element analysis. RESULTS : The results revealed that 1) the exact scaling approach can be used to determine the scale of variables in laboratory tests and numerical analysis, 2) applying only a scale factor, via the exact scaling approach, is inadequate for the error-free replacement of small particles by large ones during discrete element analysis, 3) the level of continuity of flowable materials such as SCC and cement mortar seems to be an important criterion for evaluating the applicability of the similarity concept, and 4) additional conditions, such as the kinetics of particle, contact model, and geometry, must be taken into consideration to achieve the maximum radius of replacement particles during discrete element analysis. CONCLUSIONS : The concept of similarity is a convenient tool to evaluate the correspondence of scaled laboratory test or numerical analysis to physical condition. However, to achieve excellent correspondence, additional factors, such as the kinetics of particles, contact model, and geometry, must be taken into consideration.

• 호남수학학술지
• /
• 제37권4호
• /
• pp.411-421
• /
• 2015

This paper investigates the issue of analytic travelling wave solutions for some important coupled models of fractional order. Analytic travelling wave solutions of the considered model are found by means of the Q-function method. The results give us that the Q-function method is very simple, reliable and effective for searching analytic exact solutions of complex nonlinear partial differential equations.

• Bulletin of the Korean Chemical Society
• /
• 제33권3호
• /
• pp.971-974
• /
• 2012

The facilitated diffusion effect on protein-DNA binding is studied. A rigorous theoretical approach is presented to deal with the coupling between one-dimensional and three-dimensional diffusive motions. For a simplified model, the present approach can provide numerically exact results, which are confirmed by the lattice-based Monte Carlo simulations.

• 대한수학회지
• /
• 제55권1호
• /
• pp.29-42
• /
• 2018

We construct bounded linear integral operators that giving solutions to the ${\bar{\partial}}$-equation in $L^p$-spaces and with compact supports on a q-convex intersection ($q{\geq}1$) with ${\mathcal{C}}^3$ boundary in $K{\ddot{a}}hler$ manifolds, and we apply it to obtain a Hartogs-like extension theorems for ${\bar{\partial}}$-closed forms for some bidegree.

• Journal of applied mathematics & informatics
• /
• 제35권5_6호
• /
• pp.505-512
• /
• 2017

In this paper, we explain how the exact closed-form solutions of the classical problems of viscous fluid flow over a heated stretching plate and shrinking sheet can be obtained by a reliable method.

• 경영과학
• /
• 제15권1호
• /
• pp.77-85
• /
• 1998

In this paper a face optimization algorithm is developed for solving the problem (P) of optimizing a linear function over the set of efficient solutions of a multiple objective linear program. Since the efficient set is in general a nonconvex set, problem (P) can be classified as a global optimization problem. Perhaps due to its inherent difficulty, relatively few attempts have been made to solve problem (P) in spite of the potential benefits which can be obtained by solving problem (P). The algorithm for solving problem (P) is guaranteed to find an exact optimal or almost exact optimal solution for the problem in a finite number of iterations.

• Structural Engineering and Mechanics
• /
• 제61권6호
• /
• pp.747-754
• /
• 2017

Exact solutions for stresses for an infinite rectangular plate perforated by two circular holes of different radii subjected to uni-axial or bi-axial uniform loads are investigated using the Airy stress function. The hoop stresses occurring at the edge of the circular hole are computed and plotted. Comparisons are made for the stress concentration factors for several types of loading conditions.