• Transactions of the Korean hydrogen and new energy society
• /
• v.35 no.1
• /
• pp.105-113
• /
• 2024

The natural gas dehydration process plays a central role in liquefying LNG. This study proposes two natural gas dehydration process systems applicable to liquefied natural gas (LNG) liquefaction plants, and compares and analyzes energy optimization measures through simulation. The fuel gas from feed stream (FFF) case, which requires additional equipment for gas circulation, disadvantages are design capacity and increased energy. On the other hand, the end flash gas (EFG) case has advantages such as low initial investment costs and no need for compressors, but has downsides such as increased power energy and the use of gas with different components. According to the process simulation results, the required energy is 33.22 MW for the FFF case and 32.86 MW for the EFG case, confirming 1.1% energy savings per unit time in the EFG case. Therefore, in terms of design pressure, capacity, device configuration, and required energy, the EFG case is relatively advantageous. However, further research is needed on the impact of changes in the composition of regenerated gas on the liquefaction process and the fuel gas system.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.4_2
• /
• pp.491-499
• /
• 2021

Batteries are widely used for energy storage, such as ESS(Energy Storage System), electric vehicles, electric aircraft, and electric powered ships. Among them, a submarine uses a high power battery for an energy storage. When the battery of a submarine is discharged, a diesel generator generates AC power, and then AC/DC power converter change AC power to DC power for charging the battery. Therefore, in order to lower the current capacity of the diesel generator, it is necessary to use an AC/DC converter with a high input power factor. And, a power converter with a large power capacity must have high stability because it can lead to a major accident when a failure occurs. However, the control algorithm using the traditional PI controller is difficult to satisfy stability and dynamic characteristics. In this paper, we design the high power AC/DC converter with high input power factor for battery charging systems. And, we propose a stable control algorithm. The validity of the proposed method is verified through simulation and experiments.

• Journal of Korean Society on Water Environment
• /
• v.36 no.1
• /
• pp.55-68
• /
• 2020

Because of the intensified environmental problems such as climate change and resource depletion, sewage treatment technology focused on energy management has recently attracted attention. The conversion of primary sludge from the primary sedimentation tank and excessive sludge from the secondary sedimentation tank into biogas is the key to energy-positive sewage treatment. In particular, the primary sedimentation tanks recover enriched biodegradable organic matter and anaerobic digestion process produces methane from the organic wastes for energy production. Such technologies for minimizing oxygen demand are leading the innovation regarding sewage treatment plants. However, sewage treatment facilities in Korea lack core technology and operational know-how. Actually, the energy potential of sewage is higher than sewage treatment energy consumption in the sewage treatment, but current processes are not adequately efficient in energy recovery. To improve this, it is possible to apply chemically enhanced primary treatment (CEPT), high-rate activated sludge (HRAS), and anaerobic membrane bioreactor (AnMBR) to the primary sedimentation tank. To maximize the methane production of sewage treatment plants, organic wastes such as food waste and livestock manure can be digested. Additionally, mechanical pretreatment, thermal hydrolysis, and chemical pretreatment would enhance the methane conversion of organic waste. Power generation systems based on internal combustion engines are susceptible to heat source losses, requiring breakthrough energy conversion systems such as fuel cells. To realize the energy positive sewage treatment plant, primary organic matter recovery from sewage, biogas pretreatment, and co-digestion should be optimized in the energy management system based on the knowledge-based operation.

• Journal of Electrochemical Science and Technology
• /
• v.7 no.2
• /
• pp.115-131
• /
• 2016

Though battery chemistry and technology had been developed for over a hundred years back, increase in demand for storage energy, in the computer accessories, cell phones, automobile industries for future battery car and uninterrupted power supply, has made, the development of existing and new battery, as an emerging areas of research. With innovation of high energetic inexpensive Nano structure materials, a more energy efficient battery with lower cost can be competitive with the present primary and rechargeable batteries. Materials electrochemistry of electrode materials, their synthesis and testing have been explained in the present paper to find new high efficient battery materials. The paper discusses fundamental of electrochemistry in finding true cell potential, overvoltages, current, specific energy of various combinations of anode-cathode system. It also describes of finding the performance of new electrode materials by various experiments viz. i. Cyclic Voltammetry ii. Chronoamperometry iii. Potentiodynamic Polarization iv. Electrochemical Impedance Spectroscopy (EIS). Research works of different battery materials scientists are discussed for the development of existing battery materials and new nano materials for high energetic electrodes. Problems and prospects of a few promising future batteries are explained.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.5 s.347
• /
• pp.182-188
• /
• 2006

In this study, we have designed the millimeter-wave passive imaging system which records energy that is reflected or emitted from the source and produces image. The lens and front-end of receiver appeared to be important in the system to detect input thermal noise signal. The lens for signal focusing has been designed by optical transfer function. Amplifier of the imaging systemhas been set up with 40dB in maximum gain, 5 dB in maximum noise figure, and 10GHz in bandwidth to enhance sensitivity for thermal noise and to receive it in wide-band width as well. The SBD MSS-20 141B10D diode has been used for the detector circuit to convert amplified millimeter-wave signals to DC output.

• Journal of Technology Innovation
• /
• v.21 no.1
• /
• pp.303-330
• /
• 2013

Korea has started new value creation which is the post catch-up innovation system from the catch-up innovation. Post catch-up innovation system is becoming the main R&D issue for Korea and is needed for the new concept of R&D management and planning frame. This study posed questionnaires : how to promote the knowledge creation in technology planning and what the role of organizational learning in the technology planning is. This paper suggests the relationship of success factors of knowledge creation in technology planning which is organized and operated by experts with different background. Based on the prior research on organizational learning, communications and collaborative interactions, four hypotheses that factors of knowledge creation in technology planning have positive relationship with organizational learning are extracted. This study adopts Structural Equation Modeling(SEM) to analyze the relationship between organizational learning and successful technology planning. The approach based on organizational learning and interaction will be useful for constructing the planning framework in the era of post catch-up innovation. This paper, therefore, suggests the possibility of new theoretical development and new research agenda.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10b
• /
• pp.1055-1058
• /
• 1988

A systematic way of failure diagnosis in a linear system with decentralized estimators is developed. The generalized likelihood ratio (G.L.R) approach to failure detection and identification is used for designing a diagnosis system in each subsystem based on the innovation analysis. For the simplicity of the theoretical formulation, a design scheme of failure diagnosis is developed for the system decomposed into two subsystems. To demonstrate the effectiveness of our approach, several simulation studies have been carried out on a third-order linear system which is constructed of a second-order damped oscillator and a first-order lag.

• Nuclear Engineering and Technology
• /
• v.55 no.3
• /
• pp.1015-1020
• /
• 2023

A multi-layer design is applied to mitigate single event effect (SEE) in a 28 nm System-on-Chip (SoC). It depends on asymmetric multiprocessing (AMP), redundancy and system watchdog. Irradiation tests utilized 70 and 90 MeV proton beams to examine its performance through comparative analysis. Via examining SEEs in on-chip memory (OCM), compared with the trial without applying the multi-layer design, the test results demonstrate that the adopted multi-layer design can effectively mitigate SEEs in the SoC.

• Journal of Korea Technology Innovation Society
• /
• v.14 no.4
• /
• pp.965-982
• /
• 2011

Currently, dependency of natural and energy resources on world economy may not be more serious than any before increasing the uncertainty of Korea's national economy, especially as China uses unexpectedly fast glowing portion of world resources. Due to insufficient natural resources and unmatured renewable energy system, it is very important for Korea to secure the energy sources not only for national prosperity but also security for the future. In this regard, importance and necessity of nuclear energy as a major electric power source in Korea are in need to be emphasized. Korea currently imports all the necessary enriched uranium for fabrication of nuclear fuel from abroad. Thus, it is extremely important to establish a secured supply system for enriched uranium regardless of the global political unstability as well as economic fluctuation. In order to build the nuclear fuel procurement system, it is required to analyze the global market status, current enrichment service systems, and the future technology under development. For this purpose, this study comparatively analyzes the laser based advanced technology for uranium enrichment under development in the United States, which is assumed to be 2~3 times more economically viable than currently available technologies.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.1
• /
• pp.79-87
• /
• 2015

This paper proposes a floating-type wave energy conversion system that consists of a mechanical part (yo-yo vibrating system, motion rectifying system, and power transmission system) and electrical part (power generation system). The yo-yo vibrating system, which converts translational input to rotational motion, is modeled as a single degree-of-freedom system. It can amplify the wave input via the resonance phenomenon and enhance the energy conversion efficiency. The electromechanical model is established from impedance matching of the mechanical part to the electrical system. The performance was analyzed at various wave frequencies and damping ratios for a wave input acceleration of 0.14 g. The maximum output occurred at the resonance frequency and optimal load resistance, where the power conversion efficiency and electrical output power reached 48% and 290 W, respectively. Utilizing the resonance phenomenon was found to greatly enhance the performance of the wave energy converter, and there exists a maximum power point at the optimum load resistance.