• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.857-858
• /
• 2013

• Steel and Composite Structures
• /
• v.29 no.3
• /
• pp.391-404
• /
• 2018

Researchers have been long studying new building implementation methods to improve the quality of construction, reduce the time of assembly, and increase productivity. One of these methods is the use of modular pre-fabricated structural forms that are composed of a beam, column, short column, pyramidal end block, and connection plates. In this study, a new geometry for the pyramidal end block was proposed that helps facilitate the assembly procedure. Since the proposed configuration affects the performance of this form of connection, its behavior was evaluated using finite element method. For this purpose, the connection was modeled in ABAQUS and then validated by comparing the outputs with experimental results. The research proceeded through analyzing 16 specimens under monotonic and cyclic loading. The results indicated that using the pyramidal end block not only makes the assembly process easier but also reduces the out-of-plane displacement of the short column webs and the vertical displacement of beam end. By choosing appropriate section properties for column and beam, the connection can bear a rotation up to 0.01 radians within its inelastic region and a total of 0.04 radians without any significant reduction in its bearing capacity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.10B
• /
• pp.1665-1674
• /
• 2000

This paper treats the interworking of LAN-based networks like TCP over the ATM protocol stack in an ATM multicast session. Multicast connection will cause CIP since multicast group members form a connection tree by some tree methods and share the connected tree. The paper solve the CIP problem through a block-by-block transmission using ABT/IT method. ABT/IT RM cell is modified and block scheduling algorithm considering the traffic types is applied to each ATM switch using the enhanced RM cell. Block scheduling algorithm will avoid the indiscriminate discard of UBR traffic when congestion occurs and it can provide an efficient and fair service. The paper builds a block scheduler system and suggests the block scheduling algorithm for a multicast session in an ATM switch. UBR traffics arriving at the switch trough each VC is classified by the traffic type and stored at class buffer and thereafter indisciminately transmitted. When block scheduling algorithm is applied it will improve the UBR traffic performance such as end-to-end delay cell block loss ration etc. This paper evaluated the performance of block scheduling algorithm through the simulation using the C language and data structure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.6
• /
• pp.498-508
• /
• 1991

This thesis presents a performance analysis algorithm that estimates erro performance of individual links, at the bit level, in an end-to-end digital connection using the model of 3-statte MarKov chain. The link model proposed the burst error behavior of each individual link. It also presents a method to concateante several individual links and extract a model for end-to-end digital connection. This resulting end-to-end model can be used to calculate performance parameters such as bit error rate(BER) and block error(BLER) for any block size.

• The Korean Journal of Pain
• /
• v.1 no.1
• /
• pp.125-128
• /
• 1988

A case of the left stellate ganglion block (SGB) with a warm serration of the left lower extremity in a 25-year-old male soldier is presented. During the Korean War, this patient received a penetrating gun shot wound from the right knee through the left abdominal wall, left upper arm and left thumb. He was evacuated to the a marine corps surgical hospital where amputation of the left thumb and an end-to-end anatomosis of the left brachial artery were performed. After surgery, left ulnar and median nerve paralysis and causalgia developed and about 9 months later an upper thoracic ganglionectomy was proposed at the Chin-Hae Navel Hospital. Before the ganglionectomy a stellate ganglion block for diagnostic and prognostic purposes was requested by the surgeon. This block was performed by the supraclavicular anterior approach using 10 ml of 2% procaine. The effect of the block including Horner's syndrome was confirmed 5 minute later in this patient. This patient returned to the ward by walking unassisted 10 minutes after the block, and complained of a warm sensation in the left lower extremity 20 minutes later as well as the left upper arm. This warm sensation in the lower extremity following ipsilateral stellate ganglion block indicates that the local anesthetics solution injected tinto the neck spread down to lumbar sympathetic ganalgion along the fascial membrane of the sympathetic chain as a consequence of the 10 minutes walk.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.3
• /
• pp.545-550
• /
• 2018

Ultra-lightweight block cipher CHAM, consisting of simple addition, rotation, and eXclusive-or operations, enables the efficient implementations over both low-end and high-end Internet of Things (IoT) platforms. In particular, the CHAM block cipher targets the enhanced computational performance for the low-end IoT platforms. In this paper, we introduce the efficient implementation techniques to minimize the memory consumption and optimize the execution timing over 8-bit AVR IoT platforms. To achieve the higher performance, we exploit the partly iterated expression and arrange the memory alignment. Furthermore, we exploit the optimal number of register and data update. Finally, we achieve the high RANK parameters including 29.9, 18.0, and 13.4 for CHAM 64/128, 128/128, and 128/256, respectively. These are the best implementation results in existing block ciphers.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.1
• /
• pp.63-70
• /
• 2011

In this paper, we are implemented the kasumi cipher algorithm by hardware. In this work, kasumi was designed technology-independently for application such as ASIC or core-based design. The hardware is implemented to be able to calculate both confidentiality and integrity algorithm, and a pipelined KASUMI hardware is used for a core operator to achieve high operation frequency. The proposed block cipher was mapped into EPXA10F1020C1 from Altera and used 22% of Logic Element (LE) and 10% of memory element. The result from implementing in hardware (FPGA) could operate stably in 36.35MHz. Accordingly, the implemented hardware are expected to be effectively used as a good solution for the end-to-end security which is considered as one of the important problems.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.252-257
• /
• 2000

This paper describes a look-ahead algorithm of PCNC(personal computer numerical control). The algorithm is based on acceleration/deceleration before interpolation never including a command error and determines a velocity value in end point of each block(or start point of each block). The algorithm is represented as following; 1) calculating two maximum arrival velocity(v1, v2) by a acceleration value, a command velocity and distance in a previous block and a next block, 2) getting a tangent velocity(v3) of the adjacent blocks, 3) choosing a minimum value among these three velocities, and 4) setting the value to a velocity of a start point of the next block(or a end point of the previous block). The proposed look-ahead algorithm was implemented and tested by using a commercial RTOS(real time operation system) on the MS-Windows NT 4.0 in a PC platform. For interfacing to a machine, a counter board, a DAC board and a DIO board were used. The result of the algorithm increased a machining precision and a machining speed in many short blocks.

• Clean Technology
• /
• v.17 no.3
• /
• pp.244-249
• /
• 2011

We synthesized low molecular-weight polymers bearing hydrophobic and hydrophilic parts in a chain through $CO_2$/propylene oxide copolymerization. When hydrophilic poly (ethylene glycol) bearing -OH group (s) at the end group (s) was added as a chain transfer agent in the $CO_2$/propylene oxide copolymerization catalyzed by a highly active catalyst, block polymers were formed. If poly (ethylene glycol) (PEG) bearing -OH group only at an end was fed, PEG-block-PPC diblock copolymer was obtained. When PEG bearing -OH group at both ends was fed, PPC-block-PEG-block-PPC triblock copolymer was obtained. We confirmed formation of block copolymers by $^1H$-NMR spectroscopy and GPC studies.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.316-323
• /
• 2000

In railway train operations, a braking distance between two trains must be controlled on their speeds to avoid rear end collisions. The distance is decided by some parameters such that propulsion and braking performance of trains, gradient and etc. When determining this block distance, it is important to consider the two aspects that safety insurance at train running and increase of train running frequency. In this paper, we showed a methodologies of equiblock by consideration gradients and calculated optimal block speeds on the basis of the equivalent block distance.