• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.12
• /
• pp.91-100
• /
• 1995

This paper represents the lateral first-order mode characteristics for the semiconductor laser diodes using a two-dimensional numerical simulator. In order to analyze the lateral first-order mode characteristics, Helmholtz wave equation is solved twice for the lateral fundamental and the first-order mode considering the mode gain, total losses, and the recombination rate due to the stimulated emission radiation for the each mode independantly. Through this procedure, we find that the lateral first-order mode was easily guided as increasing the stripe width for the index-guiding structures, and that the lateral first-order mode seems to be dominated in the distribution of total light intensity when its output power reaches nearly half of that of the lateral fundamental mode. This results may be used to design the device structure which guides only the lateral fundamental mode.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.388-393
• /
• 1997

As the aircraft noise become the serious matter nowadays, registrations controlling the noise emission from aircraft are established to set up noise protection areas such as residential buildings and schools. Several methods are used to assess the noise impact of an airport on its surroundings. WECPNL is used as the aircraft legislation noise index in Korea and in Japan. In this paper, experiments were made to assess the total noise impact of Kwangju airport area by using WECPNL. Also restrictions related to buildings in this area and grants were reviewed to improve building attention in the inner zone.

• Journal of the Optical Society of Korea
• /
• v.3 no.2
• /
• pp.41-46
• /
• 1999

Spatial and temporal dynamics arising in a photorefractive crystal(BaTiO3) during the process of double phase conjugation was studied experimentally. We studied the dynamical effects caused by the buildup of the diffraction grating and turn on of phase conjugated beams, as well as the spatial effects caused by the finite transverse coupling of beams and the propagation direction of beams. We observed conical emission in DPCM. We believe that various temporal and spatial instabilities are due to movement of the nonlinear grating. For a real beam coupling and constructive interaction of interference fringes in the crystal, we observed steady, periodic, irregular temporal behavior. And, by the calculation of the correlation index, we found that the spatial correlation decreased as the transverse interaction region was increased.

• Journal of the Optical Society of Korea
• /
• v.15 no.2
• /
• pp.124-127
• /
• 2011

Quantum dots were designed within a GRIN-SCH(Graded index - Separate confinement Heterostructure) heterostructure to create a high power InAlAs/AlGaAs laser diode. 808 nm light emission was with a quantum dot composition of In0.665Al0.335As and wetting layer composition of Al0.2Ga0.8As by LASTIP simulation software. Typical characteristics of GRIN structures such as high confinement ratios and Gaussian beam profiles were shown to still apply when quantum dots are used as the active media. With a dot density of 1.0x1011 dots/cm2, two quantum dot layers were found to be good enough for low threshold, high-power laser applications.

• Journal of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.17-22
• /
• 2008

We present an analysis of the soft X-ray emission of MRK 841 to investigate its long-term variation. The light variation of MRK 841 for three different energy bands of soft, medium, and hard values were studied. The maximum variability with a factor of 5 for about two years was confirmed at all three different bands. The light curves exhibit a gradual variation of brightness. In addition to a gradual variation, the short- term or micro variation was also confirmed with a factor of about two for all three different bands. The light variation of each band did not exhibit a correlation between them, but the flare event is strongest in the soft band. The hardness ratio for hard and soft bands shows irregular variation but there was no correlation between them. It was confirmed that there is a gradual decrease of the photon index. Results of our analysis are discussed within the framework of the accretion disk phenomenon.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.6
• /
• pp.801-805
• /
• 2004

In this work, the fundamental study of on-line monitoring of $SiO_2$ particles in the size range of 40 nm to 725 nm was carried out using turbidimetry. The size of particle was measured using a field emission scanning electron microscope (FE-SEM). The factors affecting on the turbidity were discussed, for example, wavelength, size, and concentration. In order to observe the dependence of turbidity on the wavelength, a turbidimetric system equipped with charged coupled detector (CCD) was built. The shape of the transmitted peak was changed and the peak maximum was shifted to the red when the concentration of particle was increased. This result indicates that the turbidity is related to the wavelength, which corresponds to the characteristic of the Mie extinction coefficient, Q, that is a function of not only particle diameter and refractive index but also wavelength. It is clear that a linear calibration curve for each particle in different size can be obtained at an optimized wavelength.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.128-132
• /
• 2013

L-Arginine semi-oxalate (LASO) single crystal has been grown by solution growth technique at room temperature. The crystal structure and lattice parameters were determined for the grown crystal by single crystal X-ray diffraction studies. Photoluminescence studies confirm the violet fluorescence emission peak at 395 nm. Optical constants like band gap, refractive index, reflectance, extinction coefficient and electric susceptibility were determined from UV-VIS-NIR spectrum. The dielectric constant, dielectric loss and ac conductivity of the compound were calculated at different temperatures and frequencies to analyze the electrical properties. The solid state parameters such as plasma energy, Penn gap, Fermi energy and polarizability were calculated to analyze second harmonic generation (SHG). Nonlinear optical property was discussed to confirm the SHG efficiency of the grown crystal.

• Journal of Integrative Natural Science
• /
• v.7 no.1
• /
• pp.1-4
• /
• 2014

Distributed Bragg reflector porous silicon of different characteristics were formed to determine their optical constants in the visible wavelength range using a periodic square wave current between low and high current densities. The surface and cross-sectional SEM images of distributed Bragg reflector porous silicon were obtained using a cold field emission scanning electron microscope. The surface image of distributed Bragg reflector porous silicon indicates that the distributions of pores are even. The cross-sectional image illustrates that the multilayer of distributed Bragg reflector porous silicon exhibits a depth of few microns and applying of square current density during the etching process results two distinct refractive indices in the contrast. Distributed Bragg reflector porous silicon exhibited a porosity depth profile that related directly to the current-time profile used in etch. Its free-standing film was obtained by applying an electro-polishing current.

• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.53.2-53.2
• /
• 2020

We measure X-ray timing and spectral properties of the pulsar PSR J0205+6449. Pulsar's rotation frequency ν = 15.20102357(9) s-1 and its derivative ${\dot{\nu}}=-4.5(1){\times}10^{-11}s^{-2}$ are measured, and the pulsed spectrum of 2-30 keV is model of power law with photon index ��psr = 1.07(16) and F2-30 keV = 7.3(6) × 10-13 erg cm-2 s-1. We use thermal emission models and non-thermal model to fit the pulsar spectrum and measure the surface temperature and luminosity of the pulsar. The surface temperature T∞ = 0.5-0.8 MK and luminosity Lth = 1-5 × 1032 erg s-1 are measure, and this result verifies the previous results known to have low surface temperature and luminosity for the age range of

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.24 no.1
• /
• pp.48-61
• /
• 2022

South Korea is quite vegetation rich country which has 63% forests and 16% cropland area. Massive NOx emissions from megacities, therefore, are easily combined with BVOCs emitted from the forest and cropland area, then produce high ozone concentration. BVOCs emissions have been estimated using well-known emission models, such as BEIS (Biogenic Emission Inventory System) or MEGAN (Model of Emission of Gases and Aerosol from Nature) which were developed using non-Korean emission factors. In this study, we ran MEGAN v2.1 model to estimate BVO Cs emissions in Korea. The MO DIS Land Cover and LAI (Leaf Area Index) products over Korea were used to run the MEGAN model for June 2012. Isoprene and Monoterpenes emissions from the model were inter-compared against the enclosure chamber measurements from Taehwa research forest in Korea, during June 11 and 12, 2012. For estimating emission from the enclosed chamber measurement data. The initial results show that isoprene emissions from the MEGAN model were up to 6.4 times higher than those from the enclosure chamber measurement. Monoterpenes from enclosure chamber measurement were up to 5.6 times higher than MEGAN emission. The differences between two datasets, however, were much smaller during the time of high emissions. More inter-comparison results and the possibilities of improving the MEGAN modeling performance using local measurement data over Korea will be presented and discussed.