• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.05
• /
• pp.283-287
• /
• 1996

This paper described the estimator and eliminator far three kinds of artifacts in electrocardiogram. The most efficient estimation of baseline drift could be obtain in the cubic spline interpolation method with the PQ and TP segment which are considered to be isoelectric, from the experimental results obtained from the applied 4 types of algorithms. The time loss and distortion could be avoided with the aid of detection criteria by checking if baseline drifts exist or not. The AIEF proposed in this paper was verified as having the best removal performance with less distortion in the QRS complex through the comparison of 5 proposed algorithms. furthermore, the AIEF are most suitable far the ECG analyzer which was only needed relatively short time data due to the fast conversion into the stable state. The proposed parabolic filter with 11 points width was identified as having the best performance for the elimination of muscle artifacts. Also we could obtain 99.7% detection accuracy of spike component and minimize the error identifying QRS complex as spike.

• Proceedings of the IEEK Conference
• /
• 2000.06d
• /
• pp.27-30
• /
• 2000

In this paper, we propose new method for denoising in processing the image compression. Usually, to compress the noise image, we must have the denoising step before encoding. But this method has a embedded character, so need not an additional noise eliminator. In SAQ step, an embedded signal is quantized more detail and the other side is suppressed. Comparing with the conventional method, we can get the enhanced image quality.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.106-106
• /
• 2004

보일러에서 연소된 후 배출된 가스는 탈황목적으로 설치된 흡수탑 내에 유입되어 Slurry Spray Nozzle에서 분사된 Limestone Slurry에 의해 배기가스중의 SO$_2$를 흡수한 다음 반응조로 떨어지게 되지만 분사된 액적의 일부는 배기가스의 압력에 의하여 같은 유동 방향으로 미세한 Mist의 형태로 배기가스와 함께 흡수탑의 Outlet Duct를 통해 빠져나간다. 이 Mist(액적크기 40 $\mu\textrm{m}$이하)에는 고형 성분이 함유되어 있는데 보통 Chloride농도가 높아 탈황설비 후단 (duct, GGH, Stack)에 plugging, 부식 등의 문제를 유발하므로 Spray Header상부에서 Mist Eliminator를 설치하여 Mist를 제거하도록 한다.(중략)

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.818-825
• /
• 2015

This study is conducted to develop new termite colony elimination system that can control termite colony much faster, and to eco-environmentally prevent termite damage occurred in wooden cultural heritage. As a result of laboratory test, we developed a component system, of which fipronil 0.001% (w/w) treated bait was used as a suitable termite colony eliminator. This system can be monitored without taking off underground, and it makes regular monitoring much more efficient. The result of field test showed that 36 termite baiting devices among 367 installed devices were damaged by foraging termites. After baiting, all of termite colonies attracted to devices were eliminated or their activity clearly decreased.

• Particle and aerosol research
• /
• v.14 no.4
• /
• pp.121-133
• /
• 2018

In this study, we developed a flat-plate type wet electrostatic precipitator that generates stable corona discharge compared to wire type discharge electrode. In order to compare the particle removal efficiency according to the shape of the discharge electrode such as the variation of the horizontal and vertical distance between spiked edges, and the variation of the height of discharge pin support were tested. As a result, when the horizontal distance between spiked edges was increased up to 36 mm, the vertical distance between spiked edges was increased up to 54 mm, and the height of the discharge pin support was increased up to 76 mm, the removal efficiency of PM10 was maintained at approximate 60.0%. Furthermore, the removal efficiency of particles over $5{\mu}m$ was about 80% or more. When the flow rate was 4 m/s, the gap between collection plates was 60 mm, and -14 kV was applied to the discharge electrode. The particle removal efficiency of the flat-plate type electrostatic precipitator was maintained when the horizontal and vertical distance between spiked edges, and the height of the discharge pin support was below a certain level. Those variables may be the important design factors for the shape of the discharge electrode. Therefore, when designing the electrostatic precipitator with multiple channels, the horizontal and vertical distance between spiked edges, and the height of discharge pin support must be selected in consideration of the weight of the discharge electrode and the processing cost.

• Journal of Power Electronics
• /
• v.10 no.5
• /
• pp.538-547
• /
• 2010

This paper deals with a stand-alone wind energy conversion system (WECS) with an isolated asynchronous generator (IAG) and voltage and frequency (VF) control feeding three-phase four-wire loads. The reference generator currents are estimated using the instantaneous symmetrical component theory to control the voltage and frequency of an IAG system. A three-leg voltage source converter (VSC) with an isolated star/delta transformer is used as an integrated VSC. An integrated VSC with a battery energy storage system (BESS) is used to control the active and reactive powers of the WECS. The WECS is modeled and simulated in MATLAB using the Simulink and the Sim Power System (SPS) toolboxes. The proposed VF controller functions as a voltage and frequency regulator, a load leveler, a load balancer and a harmonic eliminator in the WECS. A comparison is made on the rating of the VSC with and without ac capacitors connected at the terminals of an IAG. Simulation and test results are presented to verify the control algorithm.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.772_773
• /
• 2009

A numerically efficient performance analysis method for Thomson coil actuator of an arc eliminator is developed by transferring the problem to an equivalent circuit model considering the distribution of eddy current in conducting plate. Through a numerical analysis, the developed method is proven to give a solution, with only 1.3% of computing time, as accurate as finite element method. The developed method is testified by comparing with FEM calculation and experiment results.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1513-1514
• /
• 2015

전력설비가 열화, 서지에 의해 절연이 파괴되었을 경우 밀폐기기 경우 폭발, 화재를 일으킴으로써 일반인에게 피해를 입히거나 인근 설비로 파급이 확대될 가능성이 있다. 최근 전력설비는 대용량화 추세인 반면 콤팩트 사이즈를 요구하고 있어 절연문제로 인한 폭발 가능성은 더욱 커지고 있다. 이러한 전력설비의 폭발을 방지하고 피해확대를 줄이기 위해 방압변, 순간압력상승 방지장치 등이 설치되고 있으나, 예방에는 한계가 있다. 이에 최근, 국외를 중심으로 전력기기 특히, 지상설치기기의 안전성 확보를 위해 고속투입 접지스위치(Arc Eliminator)를 개발하여 설치 의무화를 고려하고 있다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.2C
• /
• pp.129-140
• /
• 2003

This paper is a result of the study that develops ghost eliminator which removes ghost among the ghosted analog or digital TV signal. We proposed innovative multilevel SIGN algorithm which is operated more stable and speedy than conventional LMS or SIGN algorithm. We compared its convergence speed with SIGN algorithm by experiment. We can eliminate ghost more speedy and stable than conventional method by using the multi-level SIGN algorithm which is presented in this paper. Multi-level SIGN algorithm can be used in any other applications instead of LMS or SIGN algorithm for stability and speed.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.3
• /
• pp.330-335
• /
• 2012

The shape optimization of a Thomson coil actuator used in an arc eliminator is done for fast response by adopting topology modification method. The displacement of the plate in a fixed calculation time is taken as the objective function. The objective function and contribution factor are calculated by using an adaptive equivalent circuit method which has been proved accurate and efficient. Both shape optimization and performance analysis are accomplished based on the segmentation of plate. Through the refinement of the sensitive segments a precise optimal plate shape can be obtained. The effectiveness of the proposed method is proved by the comparison of results before and after the shape optimization.