• Journal of Power Electronics
• /
• v.18 no.4
• /
• pp.1223-1234
• /
• 2018

In this paper, a new three-port multidirectional DC-DC converter is proposed for integrating an energy storage system (ESS) to a bipolar DC microgrid (BPDCMG). The proposed converter provides a voltage-balancing function for the BPDCMG and adjusts the charge of the ESS. Thanks to the multi-functional operation of the proposed converter, the conversion stages of the system are reduced. In addition, the efficiency and weight of the system are improved. Therefore, this converter has a significant capability when it comes to use in portable BPDCMGs such as electric DC ships. The converter modes are analyzed and small-signal models of the converter in each of the independent modes are extracted. Finally, comprehensive simulation studies are carried out and a BPDCMG laboratory prototype is implemented in order to verify the performance of the proposed voltage balancer using the burst mode control scheme.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1741-1743
• /
• 1996

This paper presents simulations of the pancake in the simplified 3D microwave oven. The results were compared with experimental data. For the comparison we used infrared photography of the heated pancake and electric field distribution obtained by simulation. Finite Element Method (FEM) using edge element is employed for the simulation. For solving the large sparse system parallelled QMR method was used.

• Journal of Power Electronics
• /
• v.12 no.2
• /
• pp.294-304
• /
• 2012

This paper proposes a fuzzy speed tracking controller and a fuzzy rotor angular acceleration observer for a surface-mounted permanent magnet synchronous motor (SPMSM) based on the Takagi-Sugeno (T-S) fuzzy model. The proposed observer-based controller is robust to load torque variations since it utilizes rotor angular acceleration information instead of the load torque value. Linear matrix inequality (LMI) sufficient conditions are given to compute the gain matrices of the speed tracking controller and the observer. In addition, it is mathematically verified that the proposed observer-based control system is asymptotically stable. Simulation and experimental results are presented to confirm that the proposed control algorithm assures a better transient behavior and less sensitivity under model parameter variations than the conventional PI control method.

• Annual Conference of KIPS
• /
• 2019.10a
• /
• pp.308-311
• /
• 2019

사람들이 도서관에 비치된 컴퓨터를 통해 원하는 도서가 있는지 검색하는 데에는 시간이 얼마 걸리지 않지만, 그 도서의 위치를 찾는 데에는 많은 시간이 소요되는데 그 이유 중 하나는 바로청구 기호이다. 각종 숫자와 문자로 이루어진 청구기호는 이에 익숙하지 않은 사람들에게는 암호로 보일 뿐이다. 이에 본 논문에서는 이를 해결하기 위해 사용자가 간단한 어플리케이션을 통해 원하는 도서를 쉽게 검색하고 그 위치를 어플리케이션 상에서 확인할 수 있으며 서가에 부착된 LED 를 통해 도서의 정확한 위치를 확인할 수 있는 스마트 북 파인더를 구현하였다.

• Journal of Broadcast Engineering
• /
• v.12 no.3
• /
• pp.242-249
• /
• 2007

Recently, International Telecommunication Union approved several methods for objective video quality measurements to be included in international standards. These methods are mainly developed to measure quality of digital video on professional CRT monitors. In this paper, we performed subjective tests in order to examine the applicability of the standard quality assessment methods for different display monitors such as common CRT, PDP, and LCD TV monitors as well as professional CRT monitors. Subjective testing on different display monitors shows that there exist relatively high correlations between the various display monitors, which indicates the standard quality assessment methods can be used on the display monitors under the given conditions of subjective duality assessment.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.2
• /
• pp.163-168
• /
• 2014

Bottom gate thin-film transistors were fabricated using solution processed IGZO channel layers with various gallium composition ratios that were annealed on a hot plate. Increasing the gallium ratio from 0.1 to 0.6 induced a threshold voltage shift in the electrical characteristics, whereas the molar ratio of In:Zn was fixed to 1:1. Among the devices, the IGZO-TFTs with gallium ratios of 0.4 and 0.5 exhibited suitable switching characteristics with low off-current and low SS values. The IGZO-TFTs prepared from IGZO films with a gallium ratio of 0.4 showed a mobility, on/off current ratio, threshold voltage, and subthreshold swing value of $0.1135cm^2/V{\cdot}s$, ${\sim}10^6$, 0.8 V, and 0.69 V/dec, respectively. IGZO-TFTs annealed at $300^{\circ}C$, $350^{\circ}C$, and $400^{\circ}C$ were also fabricated. Annealing at lower temperatures induced a positive shift in the threshold voltage and produced inferior electrical properties.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.836-841
• /
• 2018

In this paper, This paper is based on the conventional ESD protection circuits SCR and LVTSCR. Also, the SCR-based ESD protection circuit, which is different from the conventional structure, is presented and tested for variations in the trigger voltage and holding voltage. Due to the insertion of additional N +, P + regions, the newly added SCR-based protection circuit have improved electrical characteristics. To discuss the electrical characteristics of the proposed circuit, Synopsys T-CAD simulation data was shown.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.1202-1205
• /
• 2018

In this paper, we proposed ggNMOS based on 4H-SiC material and analyzed its electrical characteristics. 4H-SiC is a wide band-gap meterial, which is superior in area contrast and high voltage characteristics to Si material, and is attracting attention in the power semiconductor field. The proposed device has high robustness and strong snapback characteristics. The process consisted of SiC process and electrical characteristics were analyzed by TLP measurement equipment.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.97-98
• /
• 2011

본 논문에서는 악기의 음을 주파수 분석한 후 음이름을 찾고 이를 이용해 화음을 표시하는 장치를 기술한다. 장치는 PC기반으로 설계하였고 주파수분석을 위해 FFT를 이용하였다. 이러한 기능을 하는 하드웨어와 소프트웨어를 설계하고 구현한 결과를 제시한다.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.6
• /
• pp.346-350
• /
• 2015

In this study, we carried out an investigation of the etch characteristics of TiO₂ thin films and the selectivity of TiO₂ to SiO₂ in adaptive coupled C1₂/Ar plasma. The maximum etch rate of the TiO₂ thin film was 136±5 nm/min at a gas mixing ratio of C1₂/Ar (75%:25%). The X-ray photoelectron spectroscopy (XPS) analysis showed the efficient destruction of oxide bonds by the ion bombardment as well as the accumulation of low volatile reaction products on the etched surface.