• 한국전자파학회논문지
• /
• 제21권3호
• /
• pp.253-261
• /
• 2010

본 논문에서는 서로 다른 공진점을 갖는 공진기들을 이용하여 이중 대역 통과 필터를 구현하였다. 서로 다른 공진점을 갖는 $\lambda_g$/2 공진기들을 이용하여 각 공진기들의 동작 주파수가 서로의 동작 주파수에 영향을 미치지 않는 것을 이용하여 이중 대역 통과 필터를 설계하였다. 하측 통과 대역은 $\lambda_g$/2 공진기와 $\lambda_g$/4 공진기를 이용하였고, 상측 통과 대역은 이중 모드 공진기를 이용하여 설계하였으며, 하측 통과 대역의 공진기는 상측 통과 대역의 급전부로 동작한다. 제안된 구조는 WLAN 대역인 2.45/5.2 GHz와 2.45/5.8 GHz에서 동작하도록 설계 제작되었다.

• 한국통신학회논문지
• /
• 제25권10A호
• /
• pp.1582-1589
• /
• 2000

본 논문에서는 GHz 대역에서 동작하며 소모전력이 적은 동적 D-flipflop을 제안한다. 제안하는 D-flipflop은 두 가지 측면의 장점을 제공한다. 첫째, 클럭 입력을 갖는 PMOS 트랜지스터의 개수를 줄여 기존회로와 동일한 면적하에서도 고속 동작을 할 수 있다. 둘째, 클럭 업력을 갖는 NMOS 트랜지스터 공유에 의하여 glitch를 줄이고 소모전력을 낮출 수 있다. 제안하는 D-flipflop의 성능 비교를 위하여 기존회로와 동일한 면적의 레이아웃 회로에서 소모전력 및 최대동작주파수의 측정실험을 한다. 제안하는 회로의 응용 예로 고속 prescaler에서 동일한 방법의 특성실험을 한다. 성능분석결과 기존 회로에 비하여 동작속도와 전력소모 측면에서 우수한 성능을 나타냄을 확인하였다.

• 반도체디스플레이기술학회지
• /
• 제21권2호
• /
• pp.95-100
• /
• 2022

In this paper, a power loss analysis technique of a high-frequency transformer of a bidirectional DAB (Dual Active Bridge) converter is reported. To miniaturize the transformer of the dual active bridge converter, a resonant inductor was designed with an air gap included low-coupled rate state core to combine leakage inductor with the resonant inductor which is required for soft-switching. In this paper, leakage inductance and magnetizing inductance, core material, type of winding and winding method are included in the dual active bridge transformer loss analysis process to enable optimal design at the initial design stage. Transformer loss analysis for dual active bridge with a switching frequency of 200 kHz and maximum output of 5 kW was executed, and elements necessary for design based on the number of turns on the primary side were graphed while maintaining the transformer turns ratio and window area. In particular, it was possible to determine the optimal number of turns and thickness of the transformer, and ultimately, the total loss of the transformer could be estimated.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권3호
• /
• pp.941-955
• /
• 2015

In dual-channel networks (DCNs), all frequency hopping (FH) sequences used for data channels are chosen from the original FH sequence used for the control channel by shifting different initial phases. As the number of data channels increases, the hitting frequency point problem becomes considerably serious because DCNs is non-orthogonal synchronization network and FH sequences are non-orthogonal. The increasing severity of the hitting frequency point problem consequently reduces the resource utilization efficiency. To solve this problem, we propose a novel hitting frequency point collision avoidance method, which consists of a sequence-selection strategy called sliding correlation (SC) and a collision avoidance strategy called keeping silent on hitting frequency point (KSHF). SC is used to find the optimal phase-shifted FH sequence with the minimum number of hitting frequency points for a new data channel. The hitting frequency points and their locations in this optimal sequence are also derived for KSHF according to SC strategy. In KSHF, the transceivers transmit or receive symbol information not on the hitting frequency point, but on the next frequency point during the next FH period. Analytical and simulation results demonstrate that unlike the traditional method, the proposed method can effectively reduce the number of hitting frequency points and improve the efficiency of the code resource utilization.

• 대한전자공학회논문지TC
• /
• 제47권2호
• /
• pp.56-61
• /
• 2010

본 논문에서는 단일 FET와 composite right/left-handed (CRLH) 전송선을 이용하여 2.14GHz/5.2GHz 이중대역 고효율 전력 증폭기를 설계 구현하였다. 전송선로를 이용하여 초기의 정합값을 적절히 이동시켜 하나의 능동소자로 2.14GHz/5.2GHz의 이중대역에서 동작되는 전력증폭기를 설계하였다. 이중 대역에서 모든 고조파 성분을 조절하는 것은 매우 어렵기 때문에, CRLH 전송 선로를 이용하여 이중 대역에서 고효율 특성을 얻도록 오직 2차, 3차 고조파 성분만을 조절하였다. 또한, 이중 대역에서의 출력특성이 균형을 이루도록 하였다. 전력증폭기의 측정된 출력 전력은 각각 2.14 GHz에서 28.56 dBm, 5.2 GHz에서 29 dBm이다. 이 지점에서 얻은 전력 효율, PAE는 2.14 GHz에서 65.824 %, 5.2 GHz에서 69.86 %이다.

• Journal of electromagnetic engineering and science
• /
• 제16권3호
• /
• pp.164-168
• /
• 2016

A dual-band through-the-wall imaging radar receiver for a frequency-modulated continuous-wave radar system was designed and fabricated. The operating frequency bands of the receiver are S-band (2-4 GHz) and X-band (8-12 GHz). If the target is behind a wall, wall-reflected waves are rejected by a reconfigurable $G_m-C$ high-pass filter. The filter is designed using a high-order admittance synthesis method, and consists of transconductor circuits and capacitors. The cutoff frequency of the filter can be tuned by changing the reference current. The receiver system is fabricated on a printed circuit board using commercial devices. Measurements show 44.3 dB gain and 3.7 dB noise figure for the S-band input, and 58 dB gain and 3.02 dB noise figure for the X-band input. The cutoff frequency of the filter can be tuned from 0.7 MHz to 2.4 MHz.

• 한국전자통신학회논문지
• /
• 제10권1호
• /
• pp.7-12
• /
• 2015

본 논문에서는 LTE 통신을 위한 1.8 GHz 대역의 이중 T 구조 안테나를 연구하였다. 선로 방식으로는 마이크로 스트립 방식과 CPWG 방식을 채택하였고 특성 평가를 위해 안테나 제작 및 특성을 측정하였다. 각 선로방식의 안테나를 주파수와 반사손실에 관한 파라미터 특성을 HFSS(High Frequency Structure Simulator)를 통해 분석하고 이것을 이용하여 안테나를 설계하였다. 실제 제작한 1.8 GHz 대역의 이중 T 구조 안테나가 보여준 특성은 중심주파수 1.79 GHz 에서 입력반사손실 -23.26 dB, 대역폭 23 MHz의 결과 값을 보여 주었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권3호
• /
• pp.313-321
• /
• 2014

A low-power low-cost polar transmitter for EDGE is designed in $0.18{\mu}m$ CMOS. A differential delta-sigma modulator (DSM) tunes a three-terminal voltage-controlled oscillator (VCO) to perform RF phase modulation, where the VCO tuning curve is digitally pre-compensated for high linearity and the carrier frequency is calibrated by a dual-mode low-power frequency-locked loop (FLL). A digital intermediate-frequency (IF) pulse-width5 modulator (PWM) drives a complementary power-switch followed by an LC filter to achieve envelope modulation with high efficiency. The proposed transmitter with 9mW power dissipation relaxes the time alignment between the phase and envelope modulations, and achieves an error vector magnitude (EVM) of 4% and phase noise of -123dBc/Hz at 400kHz offset frequency.

• 천문학회보
• /
• 제36권2호
• /
• pp.128.1-128.1
• /
• 2011

We present the results of the first simultaneous dual-frequency VLBI observation with KVN (Korean VLBI Network). The KVN has a unique multi-frequency receiving system performing simultaneous observations at four frequencies, such as 22, 43, 86, and 129 GHz, in order to calibrate the atmospheric phase fluctuations, which cause a severe degradation of an interferometric coherence in mm-VLBI regime. In order to test the multi-frequency phase referencing capability of KVN, we observe the bright continuum VLBI source, NRAO 150 at two different frequencies of 21.7 (K band) and 43.4 (Q band) GHz simultaneously. The VLBI fringe phases at K and Q bands show a tight correlation of phase behaviors and the results of phase referencing (residual phase, coherence etc) are promising for achieving excellent phase referencing observations with KVN. The KVN will be able to open new perspectives in the multi-frequency study of VLBI.

• Macromolecular Research
• /
• 제15권5호
• /
• pp.396-402
• /
• 2007

The dielectric properties and various pattern-forming states of dual-frequency material in a nematic phase, as well as its mixture containing low concentrations of reactive monomers, are reported. The dielectric relaxation behaviors of nematic MLC 2048 are presented and compared to its mixture containing both mesogenic and nonmesogenic reactive monomers. The sign-inversion frequency of the dielectric anisotropy was significantly shifted on the addition of small amounts of the reactive monomers. However, all three mixtures used in this study essentially exhibited the same field-induced instabilities at different frequencies and voltage domains of the applied electric field. A broad band of modulated states were found to exist above a critical voltage and within a voltage dependent frequency band in the vicinity of the sign-inversion frequency, $f_I$, of the dielectric anisotropy. As the $f_I$ of the mixtures shifted, so did the bands of the modulated state of the different mixtures and the temperatures, which were well matched with the measured $f_I$ value.