• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.2
• /
• pp.111-116
• /
• 2001

Poly-Si TFT's(Polysilicon thin filmtransistors) have been actively studied due to their applications in active matrix liquid crystal displays and active pull-up devices of CMOS SRAM's. For such applications, the leakage current has to be in the range of sub-picoampere. However, poly-Si TFT's suffer from anomalous high leakage currents, which is attributed to the emission of the traps present at gain boundaries in the drain junction. The leakage current has been analyzed by the field emission via grain-boundary traps and thermionic field emission over potential barrier located at the grain boundary. We found that the models proposed before are not consistent with the experimental results at far as drain-offset poly-Si TFT's we fabricated concern. In this paper, leakage current of drain-offset poly-Si TFT's with different offset lengths was studied. A conduction model based on the thermionic emission of the tunneling electrons is developed to identify the leakage mechanism. It was found that the effective grain size of the drain-offset region is important factor in the leakage current. A good agreement between experimental and simulated results of the leakage current is obtained.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.26-29
• /
• 1999

The I-V characteristics of the n-channel offset gated poly-Si TETs have been systematically investigated in order to analyse the effects of offset region. The on currents are reduced due to the series resistance by the offset length and there is no kink phenomenon in offset devices. The off currents of the offset gated TFTs are remarkably reduced to 10$^{-12}$ A independent of gate and drain voltage because the electric field is weakened by the increase of the depletion region width near the drain region. It is shown that the offset regions behave as a series resistance and reduce lateral and vertical electric field.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1085-1087
• /
• 1995

A large leakage current may be one of the critical issues for poly-silicon thin film transistors(poly-Si TFTs) for LCD applications. In order to reduce the leakage current of poly-Si TFTs, several offset gated structures have been reported. However, those devices, where the offset length in the source region is not same as that in the drain region, exhibit the asymmetric electrical performances such as the threshold voltage shift and the variation of the subthreshold slope. The different offset length is caused by the additional mask step for the conventional offset structures. Also the self-aligned implantation may not be applicable due to the mis-alignment problem. In this paper, we propose a new fabrication method for poly-Si TFTs with a self-aligned offset gated structure by employing a photo resistor reflow process. Compared with the conventional poly-Si TFTs, the device is consist of two gate electrodes, of which one is the entitled main gate where the gate bias is employed and the other is the entitled subgate which is separate from both sides of the main gate. The poly-Si channel layer below the offset oxide is protected from the injected ion impurities for the source/drain implantation and acts as an offset region of the proposed device. The key feature of our new device is the offset lesion due to the offset oxide. Our experimental results show that the offset region, due to the photo resistor reflow process, has been successfully obtained in order to fabricate the offset gated poly-Si TFTs. The advantages of the proposed device are that the offset length in the source region is the same as that in the drain region because of the self-aligned implantation and the proposed device does not require any additional mask process step.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1582-1584
• /
• 1996

The polycrystalline silicon thin film transistors (poly-Si TFT) are the most promising candidate for active matrix liquid crystal displays (AMLCD) for their high mobilities and current driving capabilities. The leakage current of the poly-Si TFT is much higher than that of the amorphous-Si TFT, thus larger storage capacitance is required which reduces the aperture ratio fur the pixel. The offset gated poly-Si TFTs have been widely investigated in order to reduce the leakage current. The conventional method for fabricating an offset device may require additional mask and photolithography process step, which is inapplicable for self-aligned source/drain ion implantation and rather cost inefficient. Due to mis-alignment, offset devices show asymmetric transfer characteristics as the source and drain are switched. We have proposed and fabricated a new offset poly-Si TFT by applying photoresist reflow process. The new method does not require an additional mask step and self-aligned ion implantation is applied, thus precise offset length can be defined and source/drain symmetric transfer characteristics are achieved.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.2
• /
• pp.101-105
• /
• 2000

The effects of electrical on n-channel offset gated poly-Si TFT's have been investigated. It is observed that the electrical field near the drain region in offset devices is smaller than that of conventional device by simulation results. The variation rate of threshold voltage and subthreshold slope decrease with increasing the offset length because of lowering the electric field near the drain region. The offset gated poly-Si TFT's have been probed effective in reducing the degradation rate of device performance under electrical stressing.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.3
• /
• pp.132-138
• /
• 1997

Electrical characteristics of split-gate flash EEPROM with triple polysilicon is investigated in terms of effects of floating gate and offset gate. In order to search for t the effects of offset gate on programming characteristics, threshold voltage and drain current are studied with variation of control gate voltage. The programming process is believed to depend on vertical and horizontal electric field as well as offset gate length. The erase and program threshold voltage are found to be almost constant with variation of control gate voltage above 12V, while endurance test indicates degradation of program threshold voltage. With increase of offset gate length, program threshold voltage becomes smaller and the drain source voltage just after program under constant control gate voltage becomes higher.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.6
• /
• pp.497-504
• /
• 2014

The digital signage display is actively researched as the next generation of large FPD. To commercialize those digital signage display, the manufacturing cost must be downed with printing method instead of conventional photolithography. Here, we demonstrate a reverse offset printed TFT electrodes for the digital signage display. For the fabricated source/drain and gate electrode, we used Ag ink, silicone blanket, Clich$\acute{e}$ and reverse offset printer. We printed uniform TFT electrode patterns with narrow line width(10 ${\mu}m$ range) and thin thickness(nm range). In the end the printing source/drain and gate electrode are successfully achieved by optimization of experimental conditions such as Clich$\acute{e}$ surface treatment, ink coating process, delay time, off/set process and curing temperature. Also, we checked that the printing align accuracy was within 5 ${\mu}m$.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.10
• /
• pp.489-493
• /
• 2001

The on-current of offset and LDD structured devices in slightly decreased while the off-current are remarkably reduced and almost constant independent of gate and drain voltage because offset and LDD regions behave as a series resistance and reduce the lateral electric field in the drain depletion. Degradation of these devices is dependent upon the offset and LDD length rather than doping concentration in these regions. Also, degradation mechanism has been related to the interface generation rather than the hot carrier injection into gate oxide.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.7
• /
• pp.127-133
• /
• 1996

In this paper, we propose a new fabrication method for poly-Si TFTs with a self-aligned offset gated structure by employing a photoresist reflow process. Compared with the conventional poly-Si TFTs, the device is consist of two gate electrodes, of which one is the entitled main gate where the gate bias is employed and the other is the entitled subgate which is separate form both sides of the main gate. The poly-Si channel layer below the offset oxide is protected form the injected ion impurities for the source/drain implantation and acts as an offset region of the proposed device. The key feature of oru new device is the offset region due to the offset oxide. our experimental reuslts show that the offset region, due to the photoresist reflow process, has been sucessfully obtained in order to fabricate the offset gated poly-Si TFTs. The maximum ON/OFF ratio occurs at the L$_{off}$ of 1.1${\mu}$m and exceeds 1X10$^{6}$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.141-144
• /
• 1998

The electrical characteristics of poly-Si TFT's with offset structure by negative bias stress are systematically investigated as a function of offset length. The changes of electrical characteristics, V$\_$th/, off-current, on/off ratio, in the offset structured poly-Si TFT's are smaller than that of the conventional structured poly-Si TFT's under the stress condition (V$\_$ds/=20V, V$\_$gs/=-20V). It is found that the hot carrier effect by negative bias stress is suppressed by the offset structured poly-Si TFT's because the local electric field near the drain region is decreased by offset region.