• 한국수소및신에너지학회논문집
• /
• 제19권2호
• /
• pp.163-170
• /
• 2008

Carbon nanofibers with nano-sized structures were evaluated as a active material using supercacitor electrode which could store electrochemical energy reversibly. A feasibility of EDLC electrode was estimated with specific surface area measurement by BET method and mesopore structure of carbon nanofiber surface could be explained electrochemical absorption-desorption in aqueous electrolyte. A capacitance of carbon nanofiber electrode was increased gradually, depending on the ratio of Ketjenblack as a conducting material. Ketjen Black $20{\sim}25\;wt.%$ ratio in electrode was observed a suitable amount of conducting material by cyclic voltametry results.

• International journal of advanced smart convergence
• /
• 제2권2호
• /
• pp.16-18
• /
• 2013

In this paper, we develop a method to design a flexible thin film audio systems utilizing Polyvinylidene fluoride. The system we designed showed the properties of increased transparency and sound pressure levels. As an input terminal transparent oxide thin film is adopted. In order to provide dielectric insulation, a transparent insulating oxide thin film is coated to obtain double -layered structure. In the range of visible light, the output from the output of the system showed an increased and improved sound pressure level. The piezoelectric polymer film of polyvinylidene fluoride (PVDF) is used to produce mechanical vibration due to the applied electrical voltage signal. An analog electric voltage signal is transformed into sound waves in the audio system.

• Steel and Composite Structures
• /
• 제25권3호
• /
• pp.337-346
• /
• 2017

Sandwich shells made of composite materials are the main focus on recent literature parallel to the requirements of industry. They are commonly chosen for the modern engineering applications which require moderate strength to weight ratio without dependence on conventional manufacturing techniques. The investigations on hyperbolic paraboloidal formed sandwich composite shells are limited in the literature contrary to shells that have a number of studies, consisting of doubly curved surfaces, arbitrary boundaries and laminations. Because of the lack of contributive data in the literature, the aim of this study is to present the effects of curvature on hyperbolic paraboloidal formed, layered sandwich composite surfaces that have arbitrary boundary conditions. Analytical solution methodology for the analyses of stresses and deformations is based on Third Order Shear Deformation Theory (TSDT). Double Fourier series, which are specialized for boundary discontinuity, are used to solve highly coupled linear partial differential equations. Numerical solutions showing the effects of shell geometry are presented to provide benchmark results.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.44-47
• /
• 2004

Fabrication of barrier layer on PES substrate and plastic OLED device by atomic layer deposition are carried out. Simultaneous deposition of 30nm of $AlO_x$ film on both sides of PES gives film MOCON value of 0.0615g/$m^2$.day (@38$^{\circ}C$, 100% R.H). Introduction of conformal $AlO_x$ film by ALD resulted in enhanced barrier properties for inorganic double layered film including PECVO $SiN_x$. Preliminary life time to 91% of initial luminance (1300 cd/$m^2$ ) for 100nm of PECVD $SiN_x$/30nm of ALD $AlO_x$ coated plastic OLED device was 260 hours.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.436-437
• /
• 2008

Flexible CIGS thin film solar cell was fabricated using STS430 plate as a flexible substrate in this work. A diffusion barrier layer of $SiO_2$ thin film was deposited on STS430 substrate by PECVD followed by deposition of double layered Mo back contact. After depositing CIGS absorber layer by co-evaporation, CdS buffer layer by chemical bath deposition, ZnO window layer by RF sputtering and Al electrode by thermal evaporation, the solar cell fabrication processes were completed and its performance was evaluated. Corresponding solar cell showed an conversion efficiency of 8.35 % with $V_{OC}$ of 0.52 V, $J_{SC}$ of 26.06 mA/$cm^2$ and FF of 0.61.

• 한국세라믹학회지
• /
• 제38권3호
• /
• pp.293-299
• /
• 2001

이중층 탄소재료가 콜타르핏치와 메조페이스 핏치, 인조흑연, 천연흑연과 코크스를 사용하여 제조되었다. 콜타르 핏치는 톨루엔이나 경유와 같은 유기용매에 용해되어 코팅재로 사용되었다. 메조페이스 핏치, 인조흑연, 천연흑연 및 코크에 대한 콜타르 핏치의 코팅은 X선 회절분석과 CHN 분석을 통해 확인하였다. 코팅된 탄소재료를 질소분위기의 800-100$0^{\circ}C$에서 열처리한 후 리튬이온 전지의 음극으로 사용하기 위하여 2$600^{\circ}C$에서 열처리하였다. 이중층 탄소재료의 성능평가는 동전형태의 반쪽전지를 통해 수행되었는데, 평가는 음극으로서의 충전과 방전을 통해 수행되었다. 이런 충.방전 능력은 탄소재료의 열처리 온도의 변화나 전구체의 종류에 따라 달리 나타났지만 코팅방법의 차이에 의해서는 큰 차이가 없었다. 열처리를 80$0^{\circ}C$에서 한 경우가 100$0^{\circ}C$에서 한 경우보다 높은 충.방전 능력을 나타내었고, 2$600^{\circ}C$에서 흑연화된 것보다 탄화된 재료들이 높은 충.방전 능력을 나타내었다. 결론적으로, 음극재료의 성능은 결정화도, 조성 및 탄소재료의 미세구조에 따라 달라짐을 알 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1273-1275
• /
• 1998

The main faults at cable joint are mainly originate from double layered structure, which is composed of different kinds of materials such as XLPE/EPDM laminatest. In this paper, to investigate the effect of interfacial condition and coagents on dielectric strength of XLPE/EPDM, we prepared XLPE/grease/EPDM, XLPE/grease + coagent/EPDM laminates. Dielectric strength of the XLPE/EPDM laminates pasted with the grease compounded crosslinking coagent (TMPTA, TMPTMA) is higher than that of the laminates paseted with the grease without coagent.

• 한국전기전자재료학회논문지
• /
• 제29권10호
• /
• pp.641-646
• /
• 2016

Coil specimen was prepared by coating a copper wire with two varnish thin layers: the first was polyamideimide (PAI)/nanosilica (5 wt%) varnish and the second was anti-corona PAI/nanosilica (15 wt%) varnish. Insulation breakdown voltage was investigated under inverter surge condition at $20^{\circ}C$, $70^{\circ}C$, $100^{\circ}C$, $150^{\circ}C$, $200^{\circ}C$, $250^{\circ}C$, respectively. The insulation lifetime of the two layered coil was tens of times longer than that of original PAI coil. And the insulation lifetime decreased with increasing ambient temperature because there was weak binding strength between copper and varnish layer.

• 한국공간구조학회논문집
• /
• 제5권2호
• /
• pp.81-87
• /
• 2005

The Space structures may have large freedom in scale and form. And especially Hybrid structures are received much attention from the view points of their light weight and aesthetics. Hybrid systems are stable structures which are reticulated spatial structures composed of compressive straight members, struts and cables and Membranes. In this paper, The Hybrid Unit System are suggested using the Membrane and Cable elements based on the Tensegrity Unit system. Also, The Hybrid System of double-layered single curvature is presented. We analyze the force density method allowing form-finding for Tensegrity systems. And We analyze the shape analysis by the LARSH which is the program for nonlinear analysis.

• 한국공간구조학회논문집
• /
• 제2권2호
• /
• pp.69-76
• /
• 2002

The basic systems of spatial structures such as shells, membranes, cable-nets and tensegrity structures have been developed to create the large spaces without column. But there are some difficulties concerning structural stability, surface formation and construction method. Tensegrity systems are flexible structures which are reticulated spatial structures composed of compressive members and cables. The rigidification of tensegrity systems is related to selfstress states which can be achieved only when geometrical and mechanical requirements are simultaneously satisfied. In this paper, the force density method allowing form-finding for tensegrity systems is presented. And various modules of unit-structures are investigated and discussed using the force density method. Also, a model of double-layered single curvature arch with quadruplex using supplementary cable is presented.