• 한국전기전자재료학회논문지
• /
• 제30권6호
• /
• pp.345-348
• /
• 2017

In this work, static characteristics of 4H-SiC SJ-ACCUFETs were obtained by adjusting the p-pillar region. The structure of this SJ-ACCUFET was designed by using a two-dimensional simulator. The static characteristics of SJ-ACCUFET, such as the breakdown voltages, on-resistance, and figure of merits, were obtained by varying the p-pillar doping concentration from $1{\times}10^{15}cm^{-3}$ to $5{\times}10^{16}cm^{-3}$ and the thickness from $0{\mu}m$ to $9{\mu}m$. The doping concentration and the thickness of p-pillar region are closely related to the break down voltage and on-resistance and threshold voltages. Hence a silicon carbide SJ-ACCUFET structure with highly intensified breakdown voltages and low on-resistances with good figure of merits can be achieved by optimizing the p-pillar thickness and doping concentration.

• 한국정보통신학회논문지
• /
• 제17권6호
• /
• pp.1409-1413
• /
• 2013

본 연구에서는 이중게이트 MOSFET의 채널도핑농도의 변화에 따른 문턱전압이하 전류의 변화를 분석하였다. 이를 위하여 이중게이트 MOSFET의 채널 내 전위분포를 구하기 위하여 포아송방정식을 이용하였으며 이때 전하분포함수에 대하여 가우시안 함수를 사용하였다. 전위분포는 경계조건을 이용하여 채널크기에 따른 해석학적인 함수로 구하였다. 가우시안 함수의 변수인 이온주입범위 및 분포편차 그리고 채널도핑농도 등에 대하여 문턱전압 이하 전류 특성의 변화를 관찰하였다. 본 연구의 전위모델에 대한 타당성은 이미 기존에 발표된 논문에서 입증하였으며 본 연구에서는 이 모델을 이용하여 문턱전압이하 전류 특성을 분석하였다. 분석결과, 문턱전압이하 전류는 채널도핑농도 및 가우시안 분포함수의 변수 등에 크게 영향을 받는 것을 관찰할 수 있었다.

• 한국재료학회지
• /
• 제29권12호
• /
• pp.764-773
• /
• 2019

The gas response characteristic toward C₂H₅OH has been demonstrated in terms of copper-vacancy concentration, hole density, and microstructural factors for undoped/Li(I)-doped CuO thin films prepared by sol-gel method. For the films, both concentrations of intrinsic copper vacancies and electronic holes decrease with increasing calcination temperature from 400 to 500 to 600 ℃. Li(I) doping into CuO leads to the reduction of copper-vacancy concentration and the enhancement of hole density. The increase of calcination temperature or Li(I) doping concentration in the film increases both optical band gap energy and Cu2p binding energy, which are characterized by UV-vis-NIR and X-ray photoelectron spectroscopy, respectively. The overall hole density of the film is determined by the offset effect of intrinsic and extrinsic hole densities, which depend on the calcination temperature and the Li(I) doping amount, respectively. The apparent resistance of the film is determined by the concentration of the structural defects such as copper vacancies, Li(I) dopants, and grain boundaries, as well as by the hole density. As a result, it is found that the gas response value of the film sensor is directly proportional to the apparent sensor resistance.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.368-369
• /
• 2008

This paper describes the mechanical properties of poly(polycrystalline) 3C-SiC thin film with various doping concentration, in which poly 3C-SiC thin film's mechanical properties according to the n-doping concentration 1%$(9.2\times10^{15}cm^{-3})$, 3%$(5.2\times10^{17}cm^{-3})$, and 5%$(6.8\times10^{17}cm^{-3})$ respectively was measured by nano indentation. In the case of $9.2\times10^{15}^{-3}$ n-doping concentration, Young's Modulus and hardness were obtained as 270 GPa and 30 GPa, respectively. When the surface roughness according to n-doping concentrations was investigated by AFM(atomic force microscope), the roughness of poly 3C-SiC thin film doped by 5% concentration was 15 nm, which is also the best of them.

• 한국재료학회지
• /
• 제31권12호
• /
• pp.727-731
• /
• 2021

In this study, we have investigated a selective emitter using a UV laser on BBr₃ diffusion doping layer. The selective emitter has two regions of high and low doping concentration alternatively and this structure can remove the disadvantages of homogeneous emitter doping. The selective emitters were fabricated by using UV laser of 355 nm on the homogeneous emitters which were formed on n-type Si by BBr₃ diffusion in the furnace and the heavy boron doping regions were formed on the laser regions. In the optimized laser doping process, we are able to achieve a highly concentrated emitter with a surface resistance of up to 43 Ω/□ from 105 ± 6 Ω/□ borosilicate glass (BSG) layer on Si. In order to compare the characteristics and confirm the passivation effect, the annealing is performed after Al₂O₃ deposition using an ALD. After the annealing, the selective emitter shows a better effect than the high concentration doped emitter and a level equivalent to that of the low concentration doped emitter.

• 비파괴검사학회지
• /
• 제37권1호
• /
• pp.1-6
• /
• 2017

본 논문에서는 테라헤르츠파 시간분광영상시스템을 이용하여 도핑된 실리콘 웨이퍼의 물리적 특성을 측정하는 것에 관한 연구를 진행하였다. 투과모드와 $30^{\circ}$의 입사각을 가진 반사모드를 이용하여 측정하였으며 실리콘 웨이퍼의 도핑 정도는 N-type과 P-type 모두에서 $10^{14}$에서 $10^{18}$까지 다양하게 준비하였다. 그 결과, 도핑 정도와 테라헤르츠파와의 상관관계를 찾았으며 이를 이용하면 모든 경우에 대한 도핑된 실리콘 웨이퍼의 도핑 정도를 확인할 수 있다. 또한, 각 도핑된 실리콘 웨이퍼의 도핑된 두께, 굴절률, 유전율을 테라헤르츠 시간영역 파형분석을 통하여 계산할 수 있었다. 따라서, 테라헤르츠 시간분광영상화 기술은 도핑된 실리콘 웨이퍼의 굴절률과 유전율과 같은 물리적 특성뿐만 아니라 도핑 정도를 측정할 수 있는 유용한 기술이 될 것으로 기대된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.603-603
• /
• 2012

최근에 전면 emitter의 doping profile이 다른 selective emitter solar cell은 실제 제작시단파장 영역에서 많은 gain을 얻을 수 없어 LBC 구조의 태양전지에 관한 연구가 많이 진행되고 있다. 본 연구는 TCAD simulation을 이용하여 후면에 형성되는 locally doped BSF(p++) region의 doping profile의 변화에 따른 태양전지 특성에 관한 연구이다. Al으로 형성되는 local back contact의 doping depth 및 surface concentration에 따른 전기적, 광학적 분석을 통해 주도적인 인자를 분석하고 최적화하였다. 특히 doping depth에 따른 변화보다는 surface concentration의 변화에 따른 특성변화가 주도적으로 나타났다.

• 한국표면공학회지
• /
• 제29권5호
• /
• pp.449-453
• /
• 1996

In order to improve EL performance, anthracene was doped into the 8-hydroxyquinoline-aluminum (Alq$^3$) light-emitting layer of organic double layered EL cells. The EL cells were fabricated on ITO glass substrates by vacuum deposition. Doping of anthracene to the light-emitting $Alq^3$layer was performed by means of co-evaporation. The doping concentration was changed in the range of 5 to 30 wt.%. It was confirmed that anthracene doping of appropriate concentration increased the available current density and brightness of the EL cells. Carrier mobility of the $Alq^3$ layer was measured by time of flight method. The influence of anthracene doping on the cell performance was discussed.

• Journal of the Optical Society of Korea
• /
• 제7권2호
• /
• pp.47-52
• /
• 2003

Effect of soaking temperature on erbium doping of the optical fiber core during solution doping procedure, especially in the modified chemical vapor deposition (MCVD) process, was investigated. The concentration of dopants such as $Er^{3+} and Al^{3+}$ in the preforms and the optical fibers measured by the electron probe microanalysis (EPMA) and the optical spectrum analyzer (OSA) was found to increase with decreasing the soaking temperature. The increase in the concentration of the $Er^{3+}$ is attributed to the precipitation of the erbium due to the decrease in the solubility as well as the increase of capillary force and viscosity of the doping solution by decreasing the temperature.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.308-309
• /
• 2012

One of the critical issues in the growth of multijunction solar cell is the formation of a highly doped Esaki interband tunnel diode which interconnects unit cells of different energy band gap. Small electrical and optical losses are the requirements of such tunnel diodes [1]. To satisfy these requirements, tens of nanometer thick gallium arsenide (GaAs) can be a proper candidate due to its high carrier concentration in low energy band gap. To obtain highly doped GaAs in molecular beam epitaxy, the temperatures of Si Knudsen cell (K-cell) for n-type GaAs and Be K-cell for p-type GaAs were controlled during GaAs epitaxial growth, and the growth rate is set to 1.75 A/s. As a result, the doping concentration of p-type and n-type GaAs increased up to $4.7{\times}10^{19}cm^{-3}$ and $6.2{\times}10^{18}cm^{-3}$, respectively. However, the obtained n-type doping concentration is not sufficient to form a properly operating tunnel diode which requires a doping concentration close to $1.0{\times}10^{19}cm^{-3}$ [2]. To enhance the n-type doping concentration, n-doped GaAs samples were grown with a lower growth rate ranging from 0.318 to 1.123 A/s at a Si K-cell temperature of $1,180^{\circ}C$. As shown in Fig. 1, the n-type doping concentration was increased to $7.7{\times}10^{18}cm^{-3}$ when the growth rate was decreased to 0.318 A/s. The p-type doping concentration also increased to $4.1{\times}10^{19}cm^{-3}$ with the decrease of growth rate to 0.318 A/s. Additionally, bulk resistance was also decreased in both the grown samples. However, a transmission line measurement performed on the n-type GaAs sample grown at the rate of 0.318 A/s showed an increased specific contact resistance of $6.62{\times}10^{-4}{\Omega}{\cdot}cm^{-2}$. This high value of contact resistance is not suitable for forming contacts and interfaces. The increased resistance is attributed to the excessively incorporated dopant during low growth rate. Further studies need to be carried out to evaluate the effect of excess dopants on the operation of tunnel diode.