• 한국의류학회지
• /
• 제44권6호
• /
• pp.1163-1177
• /
• 2020

The purpose of this study is to figure out the information needed to improve the shape and size suitability of face-applied mask sheets. The study analyzed the shape of the mask sheet from the scanned images of 50 products of 37 domestic brands. In addition, each measurement of 42 mask sheets were compared and analyzed multilaterally with the 3D measurement dimensions of the faces of men and women in their 20s from the 6th SizeKorea data. Analysis on the shapes of mask sheets indicated that domestic commercial mask sheets are mainly made of single or dual sheets, with slits for enhancing fitness to the three-dimensional face. In the dimensional analysis of Korean men, women and mask sheets, most of the lengths of the mask sheets were significantly larger or smaller than the actual faces of men and women. The horizontal length and vertical length of the forehead above the eyes are significantly shorter, thereby requiring adjustments in the dimensions of this area. In order to improve the size suitability of the mask, it is necessary to adjust the dimensions of the problem area according to the research results as well as diversify the dimensions considering the target layer.

• 한국의류산업학회지
• /
• 제23권1호
• /
• pp.118-128
• /
• 2021

This study used a preliminary survey to help develop an ergonomic flight jacket that is suitable for the working environment and mission performance. The results are as follows. The ergonomic sleeve pattern was designed with a forward 165° incline that considers a shoulder joint direction suitable for the motion; in addition, a closely design opening provided warmth and safety from fire. As a result of the dimensional suitability, pilots evaluated that sleeve length and total length of the developed flight jacket were a little long (p<.01), while flight engineers and crew evaluated that those of the developed flight jacket were appropriate (p<.01). Pilots evaluated that chest circumference and waist circumference were large (p<.05), while flight engineers and crews evaluated that those of the developed flight jacket were appropriate. The evaluation of the motion suitability indicated that pilots, flight engineers and crew found the developed flight jacket more comfortable than the current flight jacket (p<.05, p<.01, p<.001). The evaluation of the usability of pockets and penholders indicated that pilots, flight engineers and crew found the developed jacket easier to use (p<.01). The flight engineers and crew evaluated that the appearance of the developed flight jacket was better than the current flight jacket (p<.05). The results of this study show that the difference of environment and mission performance has a significant influence on evaluation; therefore, it is necessary to develop separate military uniforms that included a winter flight jacket to reflect the needs of each group.

• Ecology and Resilient Infrastructure
• /
• 제4권2호
• /
• pp.105-114
• /
• 2017

본 연구는 공릉천에서 서식하는 어류와 저서무척추 동물을 대상으로 물리서식처 분석을 실시하였다. 연구대상 어류는 밀어와 피라미, 저서무척추 동물 종은 깔따구류와 줄날도래종을 선정하였다. 어류와 저서무척추 동물의 서식처 적합도 지수는 2010년 수생태계 건강성조사 및 평가사업을 통하여 구축된 생태모니터링 자료를 사용하였다. 복합서식처 적합도 지수의 계산은 가중치법을 이용하였으며, 저서무척추 동물의 경우 계층화분석법을 이용하여 산정된 가중치를 적용하였다. 흐름모의는 2차원 흐름모형인 River2D 모형을 사용하였다. 모의 대상하천의 갈수량, 저수량, 평수량, 풍수량에 대하여 어류와 저서무척추 동물의 복합서식처지수의 분포를 모의하였다. 모의결과 깔따구류와 줄날도래는 각각 소와 여울의 서식처를 선호하였으며, 피라미와 밀어는 여울의 서식처를 선호하는 것으로 모의되었다.

• 대한인간공학회지
• /
• 제25권2호
• /
• pp.85-94
• /
• 2006

The purpose of this study is to extract typical body shapes of Korean adults based on the three-dimensional Korean anthropometric data measured through 5th national anthropometric survey and to examine the suitability of the 3-D human shape data for the interior packaging. 36 three-dimensional anthropometric variables related to the design of vehicle interior were considered for the appraisal of typical body shapes. Four major factors were extracted by the factor analysis and factor scores were calculated for all subjects. Typical or standard drivers of Korean adults were selected by the minimum deviation criteria for the four factor scores with respect to 5th, 50th, and 95th percentiles, respectively. Typical drivers of Korean adults were visualized by the CATIA-HUMAN program due to the absence of proper application software for three-dimensionally scanned human body data. There are considerable differences between the anthropometric data of Korean adults and those provided by CATIA-HUMAN program, which shows that the modeling data provided by CATIA-HUMAN should not be directly applied to the ergonomic evaluation for the vehicle design. This suggests the necessity for the development of suitable software for scanned human shape data. It is also expected that the anthropometric data of typical drivers extracted from this study help design package layouts and improve the suitability of ergonomic evaluation for Korean customers.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.183.2-183.2
• /
• 2010

A three-dimensional numerical modeling using the finite element method for the suction caisson are described to decide suitability as foundation of offshore wind turbine in this paper. In the simulation, soil-structure interaction is defined by comparing experiment data. The reaction of monopod suction caisson is presented by moment loading which was calculated by FAST. Tendency of suction caisson appeared by difference of length and diameter of skirt under coupled loading. Length and diameter of skirt are suggested and evaluated as a offshore wind turbine.

• 신재생에너지
• /
• 제6권3호
• /
• pp.47-54
• /
• 2010

Foundation plays an important role in the offshore wind turbine system. Different from conventional foundations, the suction caisson is proven to be economical and reliable. In this work, three-dimensional finite element method is used to check the suitability of suction caisson foundation. NREL 5MW wind turbine is chosen as a baseline model in our simulation. The maximum overturning moment and vertical load at the mudline are calculated using FAST and Bladed. Meanwhile the soil-structure interaction response from our simulation is also compared with the experiment data from Oxford university. The design parameter such as caisson length, diameter of skirt and spacing of multipod are investigated. Accordingly based on these parameters suggestions are given to use suction caisson foundations more efficiently.

• 펄프종이기술
• /
• 제43권3호
• /
• pp.11-20
• /
• 2011

The conditions to which pulp fibers are exposed during paper production, converting, storage, use, and recycling can induce various changes in fiber morphology, surface characteristics, and suitability for paper production by recycled fibers. Most of those changes can be described by hornification. Paper has highly hygroscopic properties which affect dimensional change by relative humidity variation of surrounding condition. The purpose of this study was to investigate the dimensional stability, moisture contents and dip elongation of handsheets at different relative humidity conditions of recycled kraft pulp and BCTMP. By using recycled fibers, dimensional stability was increased because hygroscopic properties of fibers decreased with repeated recycling treatment. Dip elongation of recycled pulp was higher than that of virgin pulp because of its weak fiber-to-fiber bonding. By recycling pulp, the relative bonded area was decreased because fiber could not swell more than virgin pulp. Dimensional stability largely depended on the equilibrium moisture contents of paper, the fiber-to-fiber bonding strength, and the relative bonded area.

• Ecology and Resilient Infrastructure
• /
• 제3권4호
• /
• pp.307-314
• /
• 2016

최근 하천복원 사업은 과거 인공적인 부분을 개선하는 범위를 벗어나 격리차단된 구하도까지 복원하는 수준에 이르렀다. 구하도 복원은 하천 제방과 같은 종적 구조물에 의해 차단된 공간의 수리적 연결성 회복이 중요하다. 그러나 하천복원이 적절히 수행되었는지 관한 평가방법이 부족한 상황이기에 본 연구에서는 대상하천에서의 생태적 연결성 평가를 위한 수단을 제공하고자 한다. 이 연구에서 강우에 의한 유역유출 및 하도흐름 해석이 동시에 가능한 1차원 수치모형을 개발하여 청미천 유역에 적용한 바 있다. 특히 이 연구에서 1차원의 홍수추적 결과를 2차원의 공간분포로 변환시키고 시간에 따른 2차원의 수리특성으로부터 서식처적합도까지 산출하여 연결성 회복정도를 평가하는 수치모형을 개발하였으며, 이를 청미천 구하도 복원지역에 적용하였다. 복잡할 뿐만아니라 시간도 많이 소요되는 2차원의 분석을 수행하지 않고서도 1차원 수리특성 결과를 확장해서 2차원 수리특성을 쉽게 구할 수 있도록 한 것이 본 연구의 특징이다. 본 연구의 결과를 이용하면 구간별 대상종별 서식처적합도를 용이하게 산정할 수 있다.

• 한국의류산업학회지
• /
• 제18권1호
• /
• pp.103-112
• /
• 2016

This research was designed to figure out the perception and attitude of university students toward urban outdoor wear and to provide the guidelines for product quality improvement using Kano model. A total of 270 responses were analyzed by SPSS 20.0 through frequency and factor analysis. Respondents' levels for outdoor activity & outdoor products possession being still low, steady growth in urban outdoor wear market is expected. A total of eight quality factors were identified through factor analysis; suitability, production quality, functionality, ease of care, fabric performance, portability, fashionability, and symbolism. Based on Kano model, quality factors of urban outdoor wear were categorized into three groups: one-dimensional; indifferent; and must-be quality factor. It was found that consumers were satisfied with urban outdoor wear only when it meets the needs for suitability for body types and ease of care, meaning that manufactures should be cautious not to lose these features. Being must-be quality factor, production quality(form stability, quality of subsidiary materials), and fabric performance such as colorfastness should be basically satisfied. The relative importance of each quality feature on satisfaction/dissatisfaction was investigated using CSC(customer satisfaction coefficient). Based on the CSC, every item was classified again. Attractive quality features with large CSC were shown in suitability factor. Must-be quality features with small CSC were mainly shown in functionality and fabric performance factors. These findings imply that manufactures of urban outdoor wear should not only maintain the production quality but also focus on suitability features to differentiate their product with previous products.

• 한국정밀공학회지
• /
• 제17권4호
• /
• pp.97-105
• /
• 2000

One of the most important steps to determine the blank shape and dimensions in deep drawing process is to calculate the surface area of the product. In general, the surface area of axisymmetric products is calculated by mathematical or graphical methods. However, in the case of non-axisymmetric products, it is difficult to calculate the exact surface area due to errors as separated components. Fortunately, it is possible for elliptical products to recognize the geometry of the product in the long side and short side by drafting in another two layers on AutoCAD software. So, in this study, a surface area calculating system is constructed for a design of blank shape of deep drawing products. This system consists of input geometry recognition module and three dimensional modeling module, respectively. The suitability of this system is verified by applying to a real deep drawing product. The system constructed in this study would be very useful to reduce lead time and cost for determining the blank shape and dimensions.