Application of Surface Area Calculating System for Design of Blank Shape of Deep Drawing Product

디프 드로잉 제품의 블랭크 설계를 위한 표면적 계산 시스템의 적용

  • 박동환 (부산대학교 대학원 정밀기계공학과) ;
  • 최병근 (부산대학교 대학원 정밀기계공학) ;
  • 박상봉 (동의공업대학 금형설계) ;
  • 강성수 (부산대학교 기계공학부)
  • Published : 2000.04.01

Abstract

One of the most important steps to determine the blank shape and dimensions in deep drawing process is to calculate the surface area of the product. In general, the surface area of axisymmetric products is calculated by mathematical or graphical methods. However, in the case of non-axisymmetric products, it is difficult to calculate the exact surface area due to errors as separated components. Fortunately, it is possible for elliptical products to recognize the geometry of the product in the long side and short side by drafting in another two layers on AutoCAD software. So, in this study, a surface area calculating system is constructed for a design of blank shape of deep drawing products. This system consists of input geometry recognition module and three dimensional modeling module, respectively. The suitability of this system is verified by applying to a real deep drawing product. The system constructed in this study would be very useful to reduce lead time and cost for determining the blank shape and dimensions.

Keywords

References

  1. 박상봉, 최 영, 김병민, 최재찬, 김보환, '축대칭 디프 드로잉 제품의 공정설계 시스템에 관한 연구(I),' 한국소성가공학회지, 제5권, 제1호, pp. 27-36, 1996
  2. 김두환, '원통형 용기의 다단계 ?드로잉 공정설계에 관한 사례 연구,' 한국소성가공학회지, 제7권, 제3호, pp. 225-232, 1998
  3. 김종엽, 김낙수, 허만성, '롤백방법을 이용한 박판성형공정에서의 블랭크 설계,' 한국소성가공학회지, 제8권, 제5호, pp. 454-464, 1999
  4. 김진무, 유호영, '정사각용기 성형에서 변형률완화에 관한 연구,' 한국정밀학회지, 제16권, 제2호, pp. 31-38, 1999
  5. 太田 哲, 'プレス 絞り加工 工程設計,' 日刊工業新聞社, pp. 157-167, 1972
  6. 金世煥, 韓允熙, 李承熙, '프레스 金型說計 資料集,' 大光書林, pp. 340-343, 1988
  7. David Alkire Smith, 'DIE DESIGN HANDBOOK,' Society of Manufacturing Engineers(SME), pp. 10.1-12.44, 1990
  8. 橋本 明, 'プレス 絞り加工,' 日刊工業新聞社, pp. 118-139, 1974
  9. Edward M. Mielnik, 'Metalworking science and engineering,' McGraw-Hill, New York, pp. 779-871, 1991
  10. 오준환, 이재원, 조성진, 남배중, 양재우, 'Deep Drawing의 후가공 특징형상 공정설계 및 전문가 시스템 개발에 관한 연구,' 한국정밀공학회지, 제15권, 제11호, pp. 46-57, 1998
  11. S. K. Sitaraman, G. L. Kinzel and T. Altan, 'A knowledge-based system for process-sequence design in axisymmetric sheet-metal forming,' J. Mat. Proc. Tech., Vol. 25, No. 3, pp. 247-271, 1991 https://doi.org/10.1016/0924-0136(91)90111-Q
  12. S. K. Esche, S. Khamitkar, G. L. Kinzel, T. Altan, 'Process and die design for multi-step forming of round parts from sheet metal,' J. Mat. Proc. Tech., Vol. 59, pp. 24-33, 1996 https://doi.org/10.1016/0924-0136(96)02283-2
  13. M. Tisza, 'EXPERT SYSTEMS FOR METAL FORMING,' J. Mat. Proc. Tech., Vol. 53, pp. 423-432, 1995 https://doi.org/10.1016/0924-0136(95)01999-U
  14. S. A. Majlessi, D. Lee, 'Deep Drawing of Square-Shaped Sheet Metal Parts, Part 2 : Experimental Study,' Journal of Engineering for Industry, Vol. 115, pp. 110-117, 1993
  15. S. B. Park, Y. Choi, B. M. Kim, J. C. Choi, 'A CAD/CAM system fot deep drawing dies in a simple-action press,' J. Mat. Proc. Tech., Vol. 87, pp. 258-265, 1999 https://doi.org/10.1016/S0924-0136(98)00359-8
  16. J. Mat. Proc. Tech. v.87 A CAD/CAM system fot deep drawing dies in a simple-action press S.B.Park;Y.Choi;B.M.Kim