• Journal of Biosystems Engineering
• /
• v.41 no.2
• /
• pp.126-137
• /
• 2016

Purpose: The overall objective of this study was to evaluate the vegetation fraction of soybeans, grown under different cropping conditions using an unmanned aerial vehicle (UAV) equipped with a red, green, and blue (RGB) camera. Methods: Test plots were prepared based on different cropping treatments, i.e., soybean single-cropping, with and without herbicide application and soybean and barley-cover cropping, with and without herbicide application. The UAV flights were manually controlled using a remote flight controller on the ground, with 2.4 GHz radio frequency communication. For image pre-processing, the acquired images were pre-treated and georeferenced using a fisheye distortion removal function, and ground control points were collected using Google Maps. Tarpaulin panels of different colors were used to calibrate the multi-temporal images by converting the RGB digital number values into the RGB reflectance spectrum, utilizing a linear regression method. Excess Green (ExG) vegetation indices for each of the test plots were compared with the M-statistic method in order to quantitatively evaluate the greenness of soybean fields under different cropping systems. Results: The reflectance calibration methods used in the study showed high coefficients of determination, ranging from 0.8 to 0.9, indicating the feasibility of a linear regression fitting method for monitoring multi-temporal RGB images of soybean fields. As expected, the ExG vegetation indices changed according to different soybean growth stages, showing clear differences among the test plots with different cropping treatments in the early season of < 60 days after sowing (DAS). With the M-statistic method, the test plots under different treatments could be discriminated in the early seasons of <41 DAS, showing a value of M > 1. Conclusion: Therefore, multi-temporal images obtained with an UAV and a RGB camera could be applied for quantifying overall vegetation fractions and crop growth status, and this information could contribute to determine proper treatments for the vegetation fraction.

• Cartoon and Animation Studies
• /
• s.40
• /
• pp.423-442
• /
• 2015

In a digital environment that is keep in change content from smart phones to tablet PC are a social network service is holding deep place in our lives. Social networking applications has building a network and communication with others than other application, it means that Social networking applications are sharing not only personal purpose in that trend of variety and competition of these social networks can be expected to trend and be developed thru analysis of user certification. this study of social network service application is proposed to developing of application thru analyze the two-effective application which is high ranked in google store. the theoretical foundation was set based on the seven elements of the social network service of the information structures designed by Jean Smith. This study proceeded analysis is for the functional elements of Facebook and Instagram, and the advantages and disadvantages through survey research. As a result of the empirical analysis to user of Instagram and face book of communication, identity, satisfaction for the group are equally. Instagram is about the presence, reputation, and Facebook has had a high level of satisfaction for each sharing and relationship. Facebook got high satisfaction from sharing features, but user feel of discomfort in the randomly showing advertising content. Instagram is not showing off advertise on common page of content, it is good point to be complementary to facebook. And, Instagram hashtag is good for convenience, but satisfaction is high with Facebook. in order to increase the satisfaction of Instagram, it is necessary to consider the main advantage of the communication and the functional aspects of the share from facebook.

• Journal of Biomedical Engineering Research
• /
• v.25 no.5
• /
• pp.335-342
• /
• 2004

This paper describes a trans-admittance scanner for breast cancer detection. A FPGA-based sinusoidal waveform generator produces a constant voltage. The voltage is applied between a hand-held electrode and a scan probe placed on the breast. The scan probe contains an 8x8 array of electrodes that are kept at the ground potential. Multi-channel precision digital ammeters using the phase-sensitive demodulation technique were developed to measure the exit current from each electrode in the array. Different regions of the breast are scanned by moving the probe on the breast. We could get trans-admittance images of resistor and saline phantoms with an anomaly inside. The images provided the information on the depth and location of the anomaly. In future studies, we need to improve the accuracy through a better calibration method. We plan to test the scanner's ability to detect a cancer lesion inside the human breast.

• Cartoon and Animation Studies
• /
• s.31
• /
• pp.177-208
• /
• 2013

This research analyzes the media which is simultaneously used with TV viewing, the behaviour of multiple media users, and the characteristics of TV programs under Nscreen circumstances. According to the results, TV provides stories and positions it as the main screen (84.5%, n=566), under the Nscreen circumstances. Personal media reproduces stories from TV by utilizing aspects of social media functions such as participation, open communication, community, connectivity, etc. The content is classified under three categories: 1) elicit emotion(point feeling), 2) information production, 3) participation, which is further divided into three subcategories; watch, wish, and result guarantee based on the level of interactivity. This inquiry is based upon diary survey and focus group interviews emphasized the role change of TV, specifically that TV takes a key role in generating original stories with the expansion of screen and social media. Even though users were able to watch the same TV programs at the same time and same place, the different methods of viewing: smartphone, tablet PC, web based mp3 and etc., it reproduced different stories and elicited different characteristics from its TV viewers.

• Journal of Satellite, Information and Communications
• /
• v.2 no.2
• /
• pp.64-68
• /
• 2007

This paper describes the development of RF front.end equipment of a wide band high precision satellite navigation receiver to be able to receive the currently available GPS navigation signal and the GALILEO navigation signal to be developed in Europe in the near future. The wide band satellite navigation receiver with high precision performance is composed of L - band antenna, RF/IF converters for multi - band navigation signals, and high performance baseband processor. The L - band satellite navigation antenna is able to be received the signals in the range from 1.1 GHz to 1.6 GHz and from the navigation satellite positioned near the horizon. The navigation signal of GALILEO navigation satellite consists of L1, E5, and E6 band with signal bandwidth more than 20 MHz which is wider than GPS signal. Due to the wide band navigation signal, the IF frequency and signal processing speed should be increased. The RF/IF converter has been designed with the single stage downconversion structure, and the IF frequency of 140 MHz has been derived from considering the maximum signal bandwidth and the sampling frequency of 112 MHz to be used in ADC circuit. The final output of RF/IF converter is a digital IF signal which is generated from signal processing of the AD converter from the IF signal. The developed RF front - end has the C/N0 performance over 40dB - Hz for the - 130dBm input signal power and includes the automatic gain control circuits to provide the dynamic range over 40dB.

• The KIPS Transactions:PartB
• /
• v.19B no.1
• /
• pp.1-8
• /
• 2012

Mosaic is to make a big image by gathering lots of small materials having various colors. With advance of digital imaging techniques, photomosaic techniques using photos are widely used. In this paper, we presents an automatic photomosaic algorithm based on adaptive tiling and block matching. The proposed algorithm is composed of two processes: photo database generation and photomosaic generation. Photo database is a set of photos (or tiles) used for mosaic, where a tile is divided into $4{\times}4$ regions and the average RGB value of each region is the feature of the tile. Photomosaic generation is composed of 4 steps: feature extraction, adaptive tiling, block matching, and intensity adjustment. In feature extraction, the feature of each block is calculated after the image is splitted into the preset size of blocks. In adaptive tiling, the blocks having similar similarities are merged. Then, the blocks are compared with tiles in photo database by comparing euclidean distance as a similarity measure in block matching. Finally, in intensity adjustment, the intensity of the matched tile is replaced as that of the block to increase the similarity between the tile and the block. Also, a tile redundancy minimization scheme of adjacent blocks is applied to enhance the quality of mosaic photos. In comparison with Andrea mosaic software, the proposed algorithm outperforms in quantitative and qualitative analysis.

• Journal of Service Research and Studies
• /
• v.3 no.2
• /
• pp.33-44
• /
• 2013

As the Internet and mobile services increase, the use of wired/wireless web contents services increase and the demand for various contents explosively grows. To survive in competitive market, and to minimize the errors and warnings for web accessibility and standardization, and then to maximize the web usability, the periodical evaluation for web site should be performed with the events of web marketing and campaign. Through the web evaluation, the errors for technical programming language and contents offering can be found and diagnosed. In this paper, the quantitative and qualitative evaluation method for web site providing web contents are presented, and the analytic results for the 138 home pages in domestic are evaluated to validate the quantitative methodology. The accessibility, standardization, and usability factor are adopted for the evaluation in which accessibility is evaluated for perceivable, operable, understandable, and robust discipline with K-WAH(Korea-Web Accessibility Helper) tool, the standardization are measured for the number of errors and warnings in technical language with the W3C validator, and finally the usability factor is analyzed for the number of visits, average visit duration, and bounce rate with Google Analytics. In addition to, the quantitative analysis is also performed with the consideration of cost for construction and operation of web site. From the results, in the case of total score of 100 in conversion with relative weight, the average and standard deviation are evaluated to be 55 and 14, respectively. The correlation analysis indicates that the coefficient is estimated as 0.058, and then correlation between the quantitative results and cost is evaluated to be a little positive.

• International Journal of Highway Engineering
• /
• v.7 no.4 s.26
• /
• pp.163-171
• /
• 2005

Current roads were designed and constructed based on the design criteria and thus those were overly simplified drivers' needs. The road criteria do not suggest the desirable range of the design values but suggest the minimum requirements for the road design. Therefore, a completed road design based on the design criteria does not always guarantee the best design in terms of safety and it sometimes violates drivers' expectation. Therefore, the ROSSAV(ROad Safety Survey and Analysis Vehicle) is being developed by the KICT to evaluate road safety and increase driving safety. In this paper, the image capture system was described in detail. The image capture system is consisted of two front view cameras, two side down-looking cameras and a synchronization device. Two front view cameras were used to take a picture of road and road facilities at the driver's viewpoint. Also, two side down-looking cameras were used to capture road surface image to extract lane markings. A synchronization device were used to generate image capturing signal at the fixed distance spacing huck as every 10m. The front view images could be used to calculate and measure highway geometry such as shoulder width because every image is saved with it's locational information. And also the side down looking images could be used to extract median lane mark which representing road alignement efficiently.

• 한국HCI학회:학술대회논문집
• /
• 2008.02b
• /
• pp.109-114
• /
• 2008

We have long kept our Cartesian tradition in which Mind privileges over Body; the invention of printing technology has accelerated the tradition in which the intelligence and legibility of media were considered as a higher human value. However, the development of media and technology are supporting the multisensory mechanisms of the body as it was in preliterate era when we communicated with our whole bodily experiences. The development and spread of mass-media and new technologies have broaden the boundary of human sensory that are largely dominated by visual information and expanded it to auditory, olfactory and even gustatory sensation. Since 1960's, some philosophers and artists have recognized the human body as a subjective matter, starting the movement in which the body plays a role as an essential factor in study of human perception and cognition, aesthetics in art, and sociology, and the changed perspectives are practiced vigorously in the field of new media art; the theory of Maurice Merleau-Ponty who clarified the body as a general means for the body's possession of world, so that recognize the importance of cognition of one's body and approved the embodiment could be applied and practiced here. Therefore, we discuss how Merleau-Ponty's philosophical theory can be practiced and how McLuhan's perspective could be applied on the notion of body's extension in media by analysing some new media art cases.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.2 no.1
• /
• pp.93-104
• /
• 1982

DTM data evaluation regards accuracy and efficiency as its most important parameters, and these two elements are sensitively influenced by the sampling technique employed and its procedure. This study attempts to improve sampling techniques and evaluate the accuracy of DTM based on earth volume calculation, using aerial photography and field survey information as basic DTM data, and a regular grid and progressive sampling method for sampling process. Especially, the progressive sampling has employed different combinations of threshold and sampling criteria, that is, parameters influential on efficiency and accuracy, for the purpose of numerical tests intended to permit comparative analysis. The tests have resulted in the findings that in progressive sampling its grid density fits in well with given terrain characteristics in proportion to their variability. and that threshold and accuracy contain close mutual relations in which an increased threshold bringing more efficency but less accuracy. It follows, therefore. that a threshold, when appropriately determined, can be of very efficient use for considerably broad applications, and particularly, will play a significant role in its application to such general civil engineering as earth volume calculation.