• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.985-992
• /
• 2011

The 3D computational fluid dynamics (CFD) was performed in relation to the internal fluid characteristics and flow distribution for the development of the most optimal model in the complex post-disposal device. As it is expected that a channeling (drift) would be made by the semi-dry reactor due to the large difference in the flow distribution by the compartment in the bag filter, a structural improvement should be urgently made for more uniformed flow distribution in the bag filter. Three types of modifications such as i) changing the plenum shape, ii) orifice install in the exit part of cleaned gas, iii) increasing the plenum number were established. From the results of computational fluid dynamics, it was revealed that the changing of plenum shape and orifice install in the exit part of cleaned gas was more reasonable than the increasing the plenum number because of the difficulties of retrofit. The complex post-disposal device, modified and supplemented with this analysis, integrated the semi-dry reactor and the bag filter in a single body, so it follows that the improvement can make the device compact, save the installation area, save the operation fee, and management more convenient.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.9
• /
• pp.1184-1189
• /
• 2010

This work was conducted to examine the variation of immunoglobulins (Igs) in serum, immune milk, normal milk and colostrum upon implantation of a new Antigen Releasing Device (ARD). The core of each ARD housed an immunostimulating complex (ISCOM) that was made of adjuvant Quil A and type XIII lipase from a Pseudomonas sp. Each ARD was coated with polylactic acid, known as polylactide, that controls antigen release. Twenty lactating Chinese Holstein cows were divided into 2 groups (n = 10): test group and control group. All cows in the test group were implanted with a single injection in the right iliac lymph node with 3 types of ARDs, which were designed to release the antigens at d 0, 14 and 28 post-implantation. Blood and milk samples were collected from both groups, and colostrum samples were also collected from other post-partum cows in the same farm. Concentrations of $IgG_1$, IgA and IgM in whey and serum were measured by sandwich ELISA. The results showed that the $IgG_1$, IgA and IgM concentrations in serum and whey from the test group were higher than from the control group. Among the three Igs measured, the $IgG_1$ concentration in serum was significantly higher at d 40 after ARD implantation, and the $IgG_1$ concentration in whey peaked at d 9, 17 and 30, which corresponded with release of the antigen. Based on Pearson's correlation between Ig concentration and production parameters, IgA concentration in normal milk was positively correlated with lactation period, which reflected IgA changes during the lactation period in immune milk. In colostrum, $IgG_1$, IgA and IgM decreased abruptly from d 0 to 3, and then decreased slightly. In conclusion, serum $IgG_1$ concentration can be affected by controlled release of the ARD, while whey IgA levels are primarily affected by lactation period. These results may be useful in future studies designed to regulate concentrations of Igs in immune milk.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.152-164
• /
• 2015

A rapid development of semiconductors, sensors and mobile network technologies has enable that the embedded device includes high sensitivity sensors, wireless communication modules and a video processing module for vehicular environment, and many researchers have been actively studying the smart car technology combined on the high performance embedded devices. The vehicle is increased as the development of society, and the risk of accidents is increasing gradually. Thus, the advanced driver assistance system providing the vehicular status and the surrounding environment of the vehicle to the driver using various sensor data is actively studied. In this paper, we design and implement the smart vehicular camera device providing the V2X communication and gathering environment information. And we studied the method to create the metadata from a received video data and sensor data using video analysis algorithm. In addition, we invent S-ROI, D-ROI methods that set a region of interest in a video frame to improve calculation performance. We performed the performance evaluation for two ROI methods. As the result, we confirmed the video processing speed that S-ROI is 3.0 times and D-ROI is 4.8 times better than a full frame analysis.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.2
• /
• pp.89-95
• /
• 2017

There are a variety of apps that are finding their way. And in car navigation, we launched a product that reflects Augmented Reality technology this year. However, existing apps have problems. It is implemented in 2D or 3D, has a large error range because it has been modified in most vehicles, is not updated in real time, and car augmented reality navigation is a vehicle, and a separate device is required, etc. In this study, we implemented a smartphone app for walking directions using augmented reality, and made it possible to intuitively use a route service from a user 's location to a destination. The Dijkstra algorithm is applied to calculate the shortest path to solve the problem of finding the route with the least cost. By using this application, it is possible to use the route search service even in a data-free environment, to solve the inconvenience of the language barrier, and to update in real time, so that the latest information can be always maintained. In the future, we want to develop an app that can be commercialized by using a character in the path to promote it.

• Journal of Korea Multimedia Society
• /
• v.14 no.1
• /
• pp.133-143
• /
• 2011

This paper proposes a mobile navigation system which haptically presents the way to go to visually impaired persons. In order to convey the tactile information to the visually impaired persons, we develop a new tactile module with a solenoid, a permanent magnet and an elastic spring. Furthermore, we suggest 2D vibration flow which originates from one point and gradually propagates to other points on a surface of the haptic navigation system. The tactile module and the vibration flow method are incorporated into the proposed haptic navigation system and they stimulate the user's finger pad and palm, respectively. We conduct experiments to investigate that the proposed navigation system haptically provides the direction to the users. From the experimental results, we verify that the proposed system can generate enough tactile sensation to guide the direction to go in real-time.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.281-284
• /
• 2008

Recently, Khronos institude OpenGL ES 2.0 API for support Shader 3.0 model that can possible variable graphic processing. For this reason, the mobile device have need of supporting processor for a shader 3.0 model. We should extend instruction's length to support OpenGL ES 2.0 API, so we need more memory size. In this paper, we propose a new instruction form that adopted variable length and unit instruction architecture. This proposed instruction architecture that support to Shader 3.0 model has consist of 32bit unit instructions up to 4 which can be combined for embellishing each other. Therefore, it can execute flexible instruction combination and reduce waste of instruction fields.

• Progress in Superconductivity and Cryogenics
• /
• v.20 no.4
• /
• pp.1-5
• /
• 2018

A high gradient magnetic (HGM) separator prototype with the $2^{nd}$ generation high temperature superconducting (2G HTS) magnetic system operated in sub-cooled nitrogen is presently under development at NRC "Kurchatov Institute" (Moscow, Russia). The main goal of the project is an attempt to shift away from the complicated liquid helium cryostats towards simple cryocooler-based nitrogen cryogenics as much more convenient for HGM separators industrial applications. Using of commercial HTS tapes allows to get a sufficient level of magnetic fields and extraction forces with low energy consumption. The expected operational parameters of the device are 1.2-1.5 T in the empty operational gap and up to 3 T on the ferromagnetic filters. In this paper we briefly describe the design of the HTS rotary separator prototype with the horizontally oriented rotor axis and propose different types of ferromagnetic filters intended for weakly magnetic ores enrichment.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.17 no.4
• /
• pp.191-197
• /
• 2022

This study proposes an image-based Pose Intention Network (PIN) algorithm for rehabilitation via patients' intentions. The purpose of the PIN algorithm is for enabling an active rehabilitation exercise, which is implemented by estimating the patient's motion and classifying the intention. Existing rehabilitation involves the inconvenience of attaching a sensor directly to the patient's skin. In addition, the rehabilitation device moves the patient, which is a passive rehabilitation method. Our algorithm consists of two steps. First, we estimate the user's joint position through the OpenPose algorithm, which is efficient in estimating 2D human pose in an image. Second, an intention classifier is constructed for classifying the motions into three categories, and a sequence of images including joint information is used as input. The intention network also learns correlations between joints and changes in joints over a short period of time, which can be easily used to determine the intention of the motion. To implement the proposed algorithm and conduct real-world experiments, we collected our own dataset, which is composed of videos of three classes. The network is trained using short segment clips of the video. Experimental results demonstrate that the proposed algorithm is effective for classifying intentions based on a short video clip.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.1 no.4
• /
• pp.216-231
• /
• 2001

Several methods for improving device yields and characteristics have been studied by IC manufacturers, as the options for programming components become diversified through the introduction of novel processes. Especially, the sequential repair steps on wafer level and package level are essentially required in DRAMs to improve the yield. Several repair methods for DRAMs are reviewed in this paper. They include the optical methods (laser-fuse, laser-antifuse) and the electrical methods (electrical-fuse, ONO-antifuse). Theses methods can also be categorized into the wafer-level(on wafer) and the package-level(post-package) repair methods. Although the wafer-level laser-fuse repair method is the most widely used up to now, the package-level antifuse repair method is becoming an essential auxiliary technique for its advantage in terms of cost and design efficiency. The advantages of the package-level antifuse method are discussed in this paper with the measured data of manufactured devices. With devices based on several processes, it was verified that the antifuse repair method can improve the net yield by more than 2%~3%. Finally, as an illustration of the usefulness of the package-level antifuse repair method, the repair method was applied to the replica delay circuit of DLL to get the decrease of clock skew from 55ps to 9ps.

• The KIPS Transactions:PartB
• /
• v.17B no.1
• /
• pp.31-36
• /
• 2010

After the launch of MPEG-2, it is widely used in multimedia applications like a Digital-TV or a DVD. Then, After the launch of H.264 at 2004, it has been expected to replace MPEG-2 and services IPTV and DMB. As we have been used to MPEG-2 devices by this time, we can not access H.264 Broadcast with MPEG-2 device. So We propose a new approach to transcode H.264 video into MPEG-2 form which can facilitate to display H.264 video with MPEG-2 device. To reduce the quality loss by transcoding, we use CPDT(Cascaded Pixel Domain Transcoder) structure. And to minimize processing time, SKIP block, INTRA block and motion vectors obtain from decoding process is employed for transcoding. we use BMA(Boundary Matching Algorithm) to select only one from candidate motion vectors. Experimental results show a considerable improved PSNR with reduction in processing time compared with existing methods.