• Journal of the Korean Wood Science and Technology
• /
• 제51권3호
• /
• pp.222-237
• /
• 2023

Eucalyptus pellita is one of the fast-growing tree species and has become predominant in Indonesian forest plantations. Meanwhile, tree breeding programs with clone development are the best way to provide greater genetic advantages. A better understanding of genetic control on growth and basic density in E. pellita is important for increasing wood productivity and quality. In this study, growth characteristics (tree height, diameter, and volume), basic density and its genetic parameters (heritability, genetic gain and genetic correlation) were determined. The number of clones tested in both trials was 50, divided into 5 blocks, and 5 trees/plot. The results showed that there were significant differences in growth and basic density among clones. There was an interaction between genetics and the environment further indicating the existence of unstable clones. The high heritability was found in tree height (0.82-0.86), diameter (0.82-0.90), and basic density (0.91-0.93). This implies that E. pellita has good opportunities for genetic improvement to increase wood productivity and quality. In addition, the results of genetic correlations among growth characteristics (height, diameter, and volume) and basic density showed positive moderate to highly significant value. It is suggested that these characters may be used to the advantage of the breeder for bringing improvement in these traits simultaneously. Therefore, this study provides important information of the genetic improvement of wood quality in E. pellita in Indonesia.

• 한국응용곤충학회지
• /
• 제53권4호
• /
• pp.415-425
• /
• 2014

이 연구는 사과원에서 20년동안 두 종 응애의 밀도변화를 조사하기 위하여 수행하였다. 사과나무를 가해하는 두 종의 응애 해충, 점박이응애(Tetranychus urticae)와 사과응애(Panonychus ulmi)의 발생을 1992년부터 2011년까지 8개 도시 포함, 한국의 남부지역에 위치한 사과주산지역에서 조사하였다. 20년간의 추세는 많은 과원이 1992년부터 1999년까지는 점박이응애가 주로 가해를 하였지만 2000년도부터는 사과응애가 우점하기 시작했다. 사과응애의 평균관찰밀도는 일정했고 점박이응애의 밀도는 이 기간동안 일정하지 않았다. 5년주기별 발생추세 분석은 점박이응애의 밀도가 2002년 이후에 감소하는 것을 보여주었다. 4월부터 9월까지 월별피해과원율과 두종 응애의 평균발생밀도는 사과응애의 밀도가 4월에 높지만 점박이응애의 밀도가 5월부터 9월까지 높았다. 이런 변화는 살충제 살포횟수, 초경재배관리, 질소비료 사용의 감소와 전체적인 과원관리의 변화 등으로 기인한다. 그러나 이러한 예측은 이를 증명하기 위해 보다 자세한 연구가 필요하다. 본 연구를 통해 비료살표와 같은 재배법과 살충제 살포횟수와 종합적해충관리 등의 환경적 변화가 사과원에서 두종 응애의 우점종과 발생밀도에 영향을 준 것으로 보인다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.381.2-381.2
• /
• 2014

In this study the amorphous carbon films were deposited by PECVD at the substrate temperature range of 250 to $600^{\circ}C$, and the process conditions of higher and lower precursor flow rate, respectively. The temperature was a main parameter to control the density and mirco-structures of carbon films, and their's properties depended with the process temperatrue are changed by controlling precursor flow rate. The precursor feeding rate affect on the plasma ion density and a deposition reactivity. This change of film properties was obtained the instrinsic stress, FT-IR & Raman analysis, refractive index (RI) and ext. coef. (k) measured by ellipsometer. In the process conditions of lower and higher flow rate of precursor it had a different intrinsic stress as a function of the substrate temperature.

• 한국주거학회논문집
• /
• 제9권2호
• /
• pp.33-41
• /
• 1998

To accomodate increasing housing shortage in many cities, Korean Government has implemented various residental land development projects to provide more land for new housing construction. Most of the residential areas developed by these projects were used for multi-family housing units. Under this process, the size and location of the neighborhood service facilities in the development area were regulated by uniform standards. For this reason, the neighborhood service facilities were not able to be provided according to the household density but provided in minimum status required by these standards. Based on these considerations, this study aimed to evaluated residential land development project conducted by pubilc authority, one of the residential land development projects in Korea. Results of the case studies confirmed findings from literature review and proposed that existing regulations applied to these projects need to be amended not only to accomodata unique situation of each development area but also to enhance level of the dwelling environment. As ways to resolve these problems, this study suggests followings: (1) more flexible operation of the regulations, (2) inclusion of the socio-economic characteristics of the perspective resident in planning process, and (3) introduction of design techniques in the project. Finally, this study proposed future study directions in relation to this issue.

• 한국패류학회지
• /
• 제30권1호
• /
• pp.17-23
• /
• 2014

여수 횡간도 지역에서 밀도별 피조개 각장 과 전중량의 성장은 밀도와 역 상관관계를 보였다. 밀도별 각장 평균성장은 10마리구가 5.21 mm로 가장 양호하였으며 밀도가 높을수록 각장 성장은 낮아졌다. 밀도별 전중량의 증가도 같은 결과를 보여 전반적으로 10-20마리구의 평균각장 및 평균 전중량의 증가가 30-40마리구에 비하여 양호하게 나타났다. 남해해역에서 밀도별 피조개 각장과 전중량의 성장도 밀도와 역 상관관계를 보였으나 여수해역보다 약한 역 상관관계를 보였다. 밀도별 각장 평균성장은 10마리구가 4.55 mm로 가장 양호한 결과를 보였으나, 20-40마리구의 밀도별 평균각장의 성장은 3.11, 3.36, 3.27 mm로 비슷하게 나타났다. 반면에 밀도별 전중량의 증가는 10-20마리구가 30-40마리구보다 많았다. 결론적으로 피조개의 수하양성시 양성밀도는 20마리/$0.12m^2$ (166마리/$1m^2$) 가 적당하다고 사료되었다. 여수해역에서 피조개의 생존율은 밀도별로 각각 68%-87%, 로 밀도의존적 결과를 보였으나, 먹이생물인 식물플랑크톤이 풍부한 남해해역의 생존율은 91%-100%로 월등히 양호한 결과를 보였는데, 이는 여수해역의 식물플랑크톤의 양이 남해해역의 55.89%에 불과하였기 때문이라 사료된다. 수하 양성 해역별의 수온범위는 $16.22-25.66^{\circ}C$였고, 염분은 30.07-33.48였으며, pH는 8.10-8.45범위였다. 그리고 용존산소 (DO) 는 4.49-9.65 mg/L 였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.752_753
• /
• 2009

This paper deals with controller design and dynamic simulation of hybrid magnetic bearing. The flux density at air-gap is obtained from system modeling which considers permanent magnet and electro magnet. The vertical force is derived yb that flux density using maxwell's stress tensor.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.246-251
• /
• 1998

This paper describes the main features of an unconventional tester for high power semiconductor devices. Two application ranges are highlighted. The tester is used for the extraction of GTO parameters and their verification by measurements. The second field comprises the determination of the radial and azimuthal current density distribution of a GTO tablet. The results are compared with the carrier lifetime distribution.

• 한국발생생물학회지:발생과생식
• /
• 제19권4호
• /
• pp.253-258
• /
• 2015

Spermiation was stimulated in the mature grass puffer, Takifugu niphobles, with an injection of human chorionic gonadotropin (HCG) or carp pituitary extract (CPE). Spermatocrit and sperm density were reduced, but milt production was increased in both the HCG and CPE treatment groups relative to those in the control group (P < 0.05). These results should be useful for increasing the fertilization efficiency in grass puffer breeding programs.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.642-646
• /
• 2008

Signaling system, for which ensuring safe train operation, must be a fail-safe system with higher reliability and safety. TCS has made significant improvements both on signaling system, from relay based ground signaling system to computer based on-board system, and on driving mode, form low speed and low density driving to TCS supporting high speed and high density driving. In addition, TCS has been applied to rolling stock with a wide variety of context according to the characteristics of rolling stock or railway infrastructure. In this paper, therefore, we confirmed the basic concept of ATC system and analyzed its development process in technology context via referencing international cases and ATC systems introduced and applied in Korea. Based on those analyses, we suggested the new TCS development strategy for its suitable application to high speed line, conventional line and metro, and we also provided technical considerations related to TCS application.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.8-11
• /
• 2007

The new technologies in mobile display developed in SEC are briefly reviewed. For a differentiation, SEC's LTPS line is based on SLS (Sequential Lateral Solidification) technology. In this paper, the characteristics of SEC's SLS in recent and future mobile displays were discussed. The microstructure produced by SLS crystallization is dependent on SLS process conditions such as mask design, laser energy density, and pulse duration time. The microstructure and TFT (Thin Film Transistor) performance are closely related. For an optimization of TFT performance, SLS process condition should be adjusted. Other fabrication processes except crystallization such as blocking layer, gate insulator deposition and cleaning also affect TFT performance. Optimized process condition and tailoring mask design can make it possible to produce high quality AMOLED devices. The TFT non-uniformity caused by laser energy density fluctuation could be successfully diminished by mixing technology.