• Journal of Electrical Engineering and information Science
• /
• 제2권5호
• /
• pp.17-26
• /
• 1997

Interconnect characterization on a wafer level was performed. Test patterns for single, two-coupled, and triple-coupled lines ere designed by using 0.5$\mu\textrm{m}$ CMOS process. Then interconnect capacitances and resistances were experimentally extracted by using tow port network measurements, Particularly to eliminate parasitic effects, the Y-parameter de-embedding was performed with specially designed de-embedding patterns. Also, for the purpose of comparisons, capacitance matrices were calculated by using the existing CAD model and field-solver-based commercial simulator, METAL and MEDICI. This work experimentally verifies that existing CAD models or parameter extraction may have large deviation from real values. The signal transient simulation with the experimental data and other methodologies such as field-solver-based simulation and existing model was performed. as expected, the significantly affect on the signal delay and crosstalk. The signal delay due to interconnects dominates the sub-micron-based a gate delay (e.g., inverter). Particularly, coupling capacitance deviation is so large (about more than 45% in the worst case) that signal integrity cannot e guaranteed with the existing methodologies. The characterization methodologies of this paper can be very usefully employed for the signal integrity verification or he electrical design rule establishments of IC interconnects in the industry.

• 조명전기설비학회논문지
• /
• 제28권6호
• /
• pp.40-44
• /
• 2014

In this paper, maximum power is the lowering device using the facility's energy use and peak load electricity through analyzing attitude should like to make it reduce its power base rate. Simulator to manage the demand for power, a maximum electric power base power from electronic watt-hour meters by a device's signal, predictive power, the current power by computing the goal of power for less than Maximum peak power and peak shift, so that you can manage, and peak York, which role you want a cut Metal heat treatment result which analyzes the data, demand for electricity company over the years of analyzing the characteristics of each load, and effects and Reducing power consumption device every month identified seven Sequence control to the load system and successful power control is about showing that the defined goals.

• 한국정보통신학회논문지
• /
• 제8권4호
• /
• pp.873-878
• /
• 2004

본 연구에서는 뇌졸중 초기증상의 분석으로 뇌졸중 진단을 웹상에서 간단하고 편리하게 제공하고 일반인들의 뇌졸중에 대한 지식향상으로 뇌졸중을 사전에 예방할 수 있는 뇌졸중 진단 전문가 시스템 서버를 개발하였다. 또한 신경학을 전공하는 의대생들에게도 새로운 학습용 진단 시뮬레이터를 제공하도록 하였다. 전문가 시스템의 구현 방법은 여러 가지가 있으나 본 연구에서는 인공 신경회로망과, ASP(active server page)라는 웹 프로그래밍을 이용하여 뇌졸중 진단 전문가 시스템의 추론 엔진과 서버를 설계하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.71-76
• /
• 2006

With the rapid development of spatial infrastructure in US, Europe, Japan, China and India, there is no doubt that the next generation Global Navigation Satellite System (GNSS) will improve the integrity, accuracy, reliability and availability of the position solution. GNSS is becoming an essential element of personal, commercial and public infrastructure and consequently part of our daily lives. However, the applicability of GPS in supporting a range of location-sensitive applications such as location based services in an urban environment is severely curtailed by the interference of the 3D urban settings. To characterize and gain in-depth understanding of such interferences and to be able to provide location-based optimization alternatives, a high-fidelity 3D urban model of Melbourne CBD built with ArcGIS and large scale high-resolution spatial data sets is used in this study to support a comprehensive simulation of current and future GNSS signal performance, in terms of signal continuity, availability, strength, geometry, positioning accuracy and reliability based on a number of scenarios. The design, structure and major components of the simulator are outlined. Useful time-stamped spatial patterns of the signal performance over the experimental urban area have been revealed which are valuable for supporting location based services applications, such as emergency responses, the optimization of wireless communication infrastructures and vehicle navigation services.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제6권6호
• /
• pp.643-656
• /
• 2000

ATM 포럼에서 제안하여 표준화 한 MPOA(MultiProtocol Over ATM)는 다야한 네트워크 환경에서 ATM 네트워크에게 효과적인 브릿징과 라우팅을 제공하는 프로토콜로써, 서브넷 간에 효율적인 유니캐스트 데이타 전송을 주된 목적으로 하고 있다. 본 논문에서는 ITU에서 표준화한 통신 시스템 개발용 명세 기술 언어인 SDL(Specification and Description Language)을 사용하여 MPOA 구성요소를 구현하였으며, 상위 계층에서 받은 패킷에 대한 주소 해석, Ingress/Egress 캐쉬 관리, 지름길 설정 등에 따른 MPOA 자동 절차를 SDT(SDL Design Tool)에서 제공하고 있는 시뮬레이터를 통하여 검증하였다.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제4B권3호
• /
• pp.146-152
• /
• 2004

Cost effective simulation schemes for Wind Power Generation Systems (WPGS) considering wind turbine types, generators and load capacities have been strongly investigated by researchers. As an alternative, a true weather condition based simulation method using a real-time digital simulator (RTDS) is experimented in this paper for the online real-time simulation of the WPGS. A stand-alone WPGS is, especially, simulated using the Simulation method for WPGS using Real Weather conditions (SWRW) in this work. The characteristic equation of a wind turbine is implemented in the RTDS and a RTDS model component that can be used to represent any type of wind turbine in the simulations is also established. The actual data related to weather conditions are interfaced directly to the RTDS for the purpose of online real-time simulation of the stand-alone WPGS. The outcomes of the simulation demonstrate the effectiveness of the proposed simulation scheme. The results also signify that the cost effective verification of efficiency and stability for the WPGS is possible by the proposed real-time simulation method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.847-849
• /
• 1996

As the power demands increases, one of the most important data is inside electric field of equipment in designing of insulators ami insulated wire for EHV distribution line. So far finite element analysis method is widely used to calculate this electric field. However as the shape of insulator becomes complicated, it is difficult in producing the mesh which suitable the shape. Especially, we have many difficulty that produce dense fine mesh only where the electric field is concentrated. Therefore in this paper, we perform the each conditional analysis of electric field using the Maxwell 3D Simulator to recover this defects. And we try to analyze electric field through the conventional 2 dimensional and 3 dimensional analysis in case of salt contamination on the surface of a insulator.

• 한국정보통신학회논문지
• /
• 제19권7호
• /
• pp.1561-1567
• /
• 2015

모바일 애드혹 네트워크의 노드는 일반적으로 에너지의 용량이 제한된 배터리를 사용한다. 경로의 안정성을 유지하기 위해 균형 잡힌 에너지 소비가 중요하다. 본 논문에서는 애드혹 네트워크에서 데이터 전송 경로의 안정성을 향상시키는 것을 목표로 한다. 이를 위해 데이터를 전송할 수 있는 최단 전송 경로 중에서 노드 에너지 잔량의 최소값이 가장 큰 경로를 선택하는 새로운 라우팅 프로토콜을 제안한다. 에너지 잔량의 최소값이 가장 큰 경로는 다른 경로보다 상대적으로 긴 수명을 갖게 되어 데이터 전송에 안정성을 향상 시킬 수 있다. NS-3 시뮬레이터를 사용하여 제안하는 라우팅 프로토콜이 AODV와 EA-AODV보다 수명이 긴 안정적인 경로를 제공하는 것을 확인한다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 춘계학술대회
• /
• pp.507-511
• /
• 2010

Digital radio frequency memory (이하 DRFM)은 입력되는 RF신호를 저장 후 필요한 시점에 입력된 RF신호로 복원하여 출력하는 기능을 가진 장치로써 Jammer, EW시뮬레이터, Target Echo Generator 등 사용되는 분야가 광범위하다. 본 논문에서는 고주파 입/출력모듈, 국부 발진모듈로 구성된 고주파부와 디지털 처리부로 이루어진 DRFM의 하드웨어적 구현 방안을 제안한다. 그리고 펄스형태의 RF신호를 양자화하는 ADC(A/D conversion), 이 데이터를 저장하고 재생신호를 생산하는 FPGA와 RF 신호를 생산하는 DAC(D/A conversion)로 구성되는 디지털 처리부에서 복제된 신호 생성방안을 제안한다. 이렇게 제안된 방안을 적용하여 제작한 후 모의 신호를 입력하여 얻은 시험결과를 통하여 이 제안방안의 타당성을 확인한다.

• 전력전자학회논문지
• /
• 제19권1호
• /
• pp.51-56
• /
• 2014

PV cell modeling is necessary both for software and hardware simulators in analyzing and testing the performance of PV generation systems. Unique I-V curve of a PV cell identifies its own characteristics by electrical equivalent model that is composed of diode constants ($I_o$, $v_t$), photo-generated current ($I_{ph}$), series resistance ($R_s$), and shunt resistance ($R_{sh}$). Photo-generated current can be easily estimated since it is proportional to irradiation level. However, other electrical parameters should be solved from the manufacturer's data sheet that is consisted with three remarkable operating points such as open circuit voltage ($V_{oc}$), short circuit current ($I_{sc}$), and maximum power voltage/current ($V_{MPP}/I_{MPP}$). This paper explains and analyzes mathematical process of a novel PV cell modeling algorithm that was proposed by the authors with the name of "K-algorithm".