• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.143-146
• /
• 1991

This paper describes the analysis of a capacitor-driven induction coil-gun employing an equivalent circuit. The system differerntial equations are solved by using Runge-Kutta method. The velocity characteristics of projectile and current building in barrel ciols are studied. From the results, it is shown the optimal capacitance of capacitors, charging voltage and initial position of the projectile can be determined. These results will be used as the basis data for the design of capacitor driven coil-guns.

• Journal of Electrical Engineering and Technology
• /
• 제13권5호
• /
• pp.2067-2073
• /
• 2018

This paper will present the design of a novel-type velocity-controllable electromagnetic coil launcher (EMCL). By studying the influence of initial capacitor voltage on the velocity of an EMCL, the launcher voltage can be set to precisely adjust the velocity of projectile launching. The simulation of voltage and velocity in relation to time is obtained by Maxwell software. The experimental data show that for the launch accuracy to be achievable, the actual precision is 2%. Because of the excellent performance of Velocity-controllable EMCL, it can replace the air gun and applied to split Hopkinson pressure bar (SHPB).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1580-1581
• /
• 2011

The linear accelerator of Pohang Accelerator Laboratory(PAL) will drive a top-up mode operation in PLS-II(Pohang Light Source-II). Due to this kind of the operation mode, the electron gun is expected to have shorter life time of the cathode. Further in the PLS-II, two gate valves will be installed in front of the electron gun. The distance between the pre-bunching section and the electron gun will increase by 400 mm compared to the existing system due to the insertion of these gate valves. As a result the incident electron beam. One of the goals to improve the beam pulse width is by incorporating suitable biased voltage. In this paper, we will present test results of beam pulse width as a function of different biased voltage and focusing solenoid coil.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권4호
• /
• pp.437-444
• /
• 2012

본 논문은 지열을 이용한 코일 침적형 히트펌프 시스템의 운전변수에 대한 최적 설계를 위해서 히트펌프의 성능 특성을 실험적으로 조사하였다. 본 연구에서 고려된 작동변수로는 과냉각도, 증발온도, 응축온도 등이다. 그 실험결과를 요약하면 다음과 같다. 지열 이용 코일 침적형 히트펌프 시스템의 증발온도와 과냉각도가 증가할수록, 응축온도는 감소할수록 성능계수는 증가함을 알 수 있다. 즉, 지열 이용 코일 침적형 히트펌프 시스템의 증발온도, 응축온도, 과냉각도는 냉방과 난방의 성능계수에 영향을 미치는 것을 알 수 있다. 따라서 본 연구에서 제안하는 히트펌프 시스템이 최고의 성능을 나타내기 위한 최적의 운전조건을 결정할 필요가 있다.

• 한국진공학회지
• /
• 제12권1호
• /
• pp.1-6
• /
• 2003

50 kW급 출력의 전자빔을 발생시킬 수 있는 축선 방식 전자총 (axial electron beam gun)과 전원장치를 제작하였다. 전자총은 전자빔 발생장치와 전자빔 궤적제어장치로 이루어졌다. 전자빔 발생장치는 필라멘트와 음극(cathode), 양극(anode)으로 구성되었고 전자빔의 최대전류는 2A, 가속전압은 평균 25kV이다. 전자빔 궤적제어장치는 전자빔의 크기를 조절하는 초점 (focusing) 코일과 전자빔의 방향을 조절하는 편향(deflection) 코일 및 주사 (scanning) 코일로 구성되었다. 전자총과 별개로 진공용기 내부에 Helmholtz 코일을 설치하여 시료의 표면에 입사되는 전자빔의 입사각도를 최적화시켰다. 각 부분의 동작 특성을 측정한 결과와 제작된 전자총으로 고융점 원소인 지르코늄 (zirconium, Zr)과 가돌리늄(gadolinium, Gd) 금속을 증발시킨 결과를 정리하였다.

• Journal of Magnetics
• /
• 제15권2호
• /
• pp.70-73
• /
• 2010

A magnetic phase is partly produced in a steam generator tube due to stress and heat, because steam generator tubes are exposed to high temperature, high pressure and radioactivity conditions. This adversely affects the safety of steam generator tubes. However, it is difficult to detect it using conventional eddy current methods. Therefore, a new type of probe is needed to separate the signals from the defects and magnetic phases. In this study, a new U-type yoke, which contained two types of coils, a magnetizing coil and detecting coil, was designed. In addition, the signal induced by the magnetic phase and defect in an Inconel 600 plate were simulated.

• 전기전자학회논문지
• /
• 제16권3호
• /
• pp.217-223
• /
• 2012

본 논문은 트리거 시간을 조절하여 펄스 성형이 가능한 150 MW 펄스 파워 시스템의 설계와 동작특성을 알아보았다. 이 시스템은 2개의 커패시터 뱅크 모듈로 구성되어 있고, 각 커패시터 뱅크 모듈은 병렬로 연결되어 있다. 그리고 커패시터 뱅크 모듈은 메인스위치, 커패시터, 에너지 덤프회로, 크로바 회로, 펄스 성형 인덕터로 구성되어 있다. 또한 이 시스템의 모듈 선택과 트리거 시간은 트리거 제어부에서 조정된다. Pspice 시뮬레이션은 실험회로의 결과를 예측하고, 시스템의 구성품의 파라미터를 결정하기 위한 것으로 사용하였다. 실험 결과, 시뮬레이션은 실험결과와 잘 일치하였다. 출력 전류의 펄스폭은 커패시터 뱅크 모듈에서의 순간적 점화 시간 제어로 300~650 us의 펄스폭이 형성되었다. 그리고 최대 전류값은 2개의 커패시터 뱅크 모듈이 동시에 트리거 되었을 때 약 40 kA 정도이다. 이 150 MW 펄스 파워 시스템은 파암 전원, Rail Gun, Coil Gun, 나노분말 제조, HPM 등과 같은 대전류 펄스 파워 시스템에 적용할 수 있다.

• Journal of Mechanical Science and Technology
• /
• 제16권8호
• /
• pp.1089-1094
• /
• 2002

Mobile communication industry powered by electronics and information technology is building a transforming way for human communication. The latest electronics is so saturated to forget the difficulty in size reduction of electronic parts. However, mechanical parts, such as dynamic speakers and vibration motors, are intrinsically not easy to realize size reduction due to their construction. In this paper, a hexahedral type with simpler configuration is introduced to substitute for the conventional vibration motors. For uneven magnetic field analysis of the hexahedral type, FEM was used to determine magnetic flux density. After an analysis of magnetic and mechanical characteristics, it is shown that the coil configuration is the most important parameter to increase the output torque, and thus vibration. For optimization, genetic algorithm is used to find the optimal configuration of coil to maximize the output torque. Experimental results are also followed to confirm the validity of the proposed design.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2005년도 생물공학의 동향(XVI)
• /
• pp.420-422
• /
• 2005

TMC (Tautomycetin) is a liner polyketide immunosuppressive antifungal compound produced by Streptomyces spp. Inhibition of T cell proliferation with TMC was observed highly efficient at 100-fold lower than those needed to achieve maximal inhibition with cyclosporin A. To elucidate the biosynthetic pathway of TMC, a genomic DNA library was constructed using a E. coil-Streptomyces shuttle cosmid vector, pOJ446. The DNA libraries were screened by colony blot hybridization using several polyketide ${\beta}-ketosynthase$ (KS) probes amplified from TMC-producing Streptomyces genomic DNA using polymerase chain reaction (PCR), of which the degenerate primers were designed based on the highly conserved sequences present in KS domains of various type I polyketide synthase genes in Streptomyces species. This library construction and screening approach led to the isolation of several positive cosmid clones representing type I polyketide biosynthetic gene clusters. In addition, a Streptomyces regulatory gene called afsR2 (a global regulatory gene stimulating antibiotic production in both S. coelicolor and S. lividans) was successfully integrated into the TMC-producing Streptomyces chromosome via E. coil-Streptomyces heterologous conjugation mehtod. The more detailed results of production improvement and genetic characterization of TMC-producing Streptomyces spp. will be discussed.

• 한국소음진동공학회논문집
• /
• 제16권2호
• /
• pp.183-189
• /
• 2006

In mobile phones of multimedia era, microspeakers of high qualify sound are essential parts to generate human voice in speaker phone and MP3 song player. In this paper, two types of microspeakers, outer permanent magnet (PM) and combined PM type, are analyzed using electromagnetic, mechanical and their coupling analysis. For performance comparison, voice coil diameter is chosen as a design parameter to change excitation position and magnet volume for both types. For combined PM type, sound pressure level (SPL) is improved due to increased PM volume compared to outer PM type. Also, with the decreased voice coil diameter for combined PM type, the 1st resonant mode of the diaphragm is more efficiently excited due to concentrative excitation, resulting in lower and broader frequency range. Therefore, it can be said that the combined PM type microspeakers are more advantageous for high performance microspeaker which are essential for multimedia era.