Abstract
An axial electron beam gun system, which emits the electron beam power of 50 kW, has been manufactured. The electron beam gun consists of two parts. One is the electron beam generation part. including the filament, cathode, and anode. The maximum beam current is 2 A and the acceleration voltage is 25 kV. The other part includes the focusing-, deflection-, and scanning coils. The beam diameter and ham trajectory can be controlled by these coils. The characteristic of each part is measured ior the optimum condition of evaporation process. Moreover, Helmholtz coil is installed inside the vacuum chamber to adjust the incident angel of the beam to the melting surface for the maximum evaporation. We report on the evaporation rates for zirconium(Zr) and gadolinium(Gd) metals which have the high melting temperatures.
50 kW급 출력의 전자빔을 발생시킬 수 있는 축선 방식 전자총 (axial electron beam gun)과 전원장치를 제작하였다. 전자총은 전자빔 발생장치와 전자빔 궤적제어장치로 이루어졌다. 전자빔 발생장치는 필라멘트와 음극(cathode), 양극(anode)으로 구성되었고 전자빔의 최대전류는 2A, 가속전압은 평균 25kV이다. 전자빔 궤적제어장치는 전자빔의 크기를 조절하는 초점 (focusing) 코일과 전자빔의 방향을 조절하는 편향(deflection) 코일 및 주사 (scanning) 코일로 구성되었다. 전자총과 별개로 진공용기 내부에 Helmholtz 코일을 설치하여 시료의 표면에 입사되는 전자빔의 입사각도를 최적화시켰다. 각 부분의 동작 특성을 측정한 결과와 제작된 전자총으로 고융점 원소인 지르코늄 (zirconium, Zr)과 가돌리늄(gadolinium, Gd) 금속을 증발시킨 결과를 정리하였다.