• Atmosphere
• /
• v.29 no.4
• /
• pp.501-509
• /
• 2019

Asian Dust is a meteorological phenomenon that sand particles are raised from the arid and semi-arid regions-Taklamakan Desert, Gobi Desert and Inner Mongolia in China-and transported by westerlies and deposited on the surface. Asian dust results in a negative effect on human health as well as environmental, social and economic aspects. For monitoring of Asian Dust, Korea Meteorological Administration operates 29 stations using a continuous ambient particulate monitor. Kim et al. (2016) developed an automatic quality check (AQC) algorithm for objective and systematic quality check of observed PM₁₀ concentration and evaluated AQC with results of a manual quality check (MQC). The results showed the AQC algorithm could detect abnormal observations efficiently but it also presented a large number of false alarms which result from valid error check. To complement the deficiency of AQC and to develop an AQC system which can be applied in real-time, AQC has been modulated. Based on the analysis of instrument status codes, valid error check process was revised and 6 status codes were further considered as normal. Also, time continuity check and spike check were modified so that posterior data was not referred at inspection time. Two-year observed PM₁₀ concentration data and corresponding MQC results were used to evaluate the modulated AQC compared to the original AQC algorithm. The results showed a false alarm ratio decreased from 0.44 to 0.09 and the accuracy and the probability of detection were conserved well in spite of the exclusion of posterior data at inspection time.

• The Research Journal of the Costume Culture
• /
• v.18 no.1
• /
• pp.13-28
• /
• 2010

This study is focused on the elucidation of efficient and correct marking methods by comparing and analyzing marker efficiency depending on the marking job condition such as interval of checking-pattern and marker orientation using woman's Jacket and Slacks. Research Method intended to compare the marking efficiency of Jacket and Slacks, check-less and check- patterned materials with the intervals of $1.5{\times}1.5cm$ and $5{\times}5cm$ were selected. First, in the comparison of marking efficiency depending on check-pattern interval, regardless of the direction of marker position, single-item makers and set-item makers, the efficiency of check-less materials was higher than those of check-patterned materials and increasing the intervals decreased marking efficiency and vice versa. Marking efficiency of Slacks was less influenced than marking efficiency of Jacket by check-pattern interval. Second, in the comparison of marking efficiency depending on the direction of marker position, regardless of check-pattern interval and number of maker pieces, the efficiency of nap-up-and-down position was higher than those of nap-one-way position. Third, the marking efficiency of single-item was more effective than one of set-item in all working condition except nap-one-way position in checkless materials.

• Journal of agricultural medicine and community health
• /
• v.9 no.1
• /
• pp.39-45
• /
• 1984

This research was done to gain the health information in one of the target areas(rural area) of the Korea University Community Health Project, and to improve and standardize the methodology of the health interview survey. There were two types of questions;one was the simple open-ended question and the other was check list in the interview survey for a total of 1,406 inhabitants. And so the result obtained from the above survey was analysed. The results as follows; 1) The morbidity rate in general was 11.2% by simple open-ended question and 32.5% by check list during recent 20 days in interview method. 2) Women had higher morbidity rate in both kinds of method. 3) The most prevalent diseases in the interview method using check list were the ones of the musculo-skeletal system and connective tissue (22.5%), and diseases of the respiratory system (19.8%) and digestive system (13.7%) were in order of frequency. 4) By the position in the family, housewives had highest morbidity rate in the interview method unrespectedly, and the reason seemed that the respondents were houseweives themselves and the morbidity rate was the one by spell not by person. But morbidity rate by the socio-economic status had no significant difference in both methods. 5) The agreement rate on simple open-ended question and check list was 72.5%, but if limiting respondents themselves only, the rate was falled to 54%. 6) The morbidities were diverse in the review of the results of previous morbidity surveies, but the morbidity rate was higher and less variable in case of using check list and getting the replies individually than using simple open-ended question and proxy respondents.

• Progress in Medical Physics
• /
• v.25 no.2
• /
• pp.65-71
• /
• 2014

A Varian Portal Dosimetry system was compared to an isocentrically mounted MapCHECK 2 diode array for volumetric modulated arc therapy (VMAT) QA. A Varian TrueBeam STx with an aS-1000 digital imaging panel was used to acquire VMAT QA images for 13 plans using four photon energies (6, 8, 10 and 15 MV). The EPID-based QA images were compared to the Portal Dose Image Prediction calculated in the Varian Eclipse treatment planning system (TPS). An isocentrically mounted Sun Nuclear MapCHECK 2 diode array with 5 cm water-equivalent buildup was also used for the VMAT QAs and the measurements were compared to a composite dose plane from the Eclipse TPS. A ${\gamma}$ test was implemented in the Sun Nuclear Patient software with 10% threshold and absolute comparison at 1%/1 mm (dose difference/distance-to-agreement), 2%/2 mm, and 3%/3 mm criteria for both QA methods. The two-tailed paired Student's t-test was employed to analyze the statistical significance at 95% confidence level. The average ${\gamma}$ passing rates were greater than 95% at 3%/3 mm using both methods for all four energies. The differences in the average passing rates between the two methods were within 1.7% and 1.6% of each other when analyzed at 2%/2 mm and 3%/3 mm, respectively. The EPID passing rates were somewhat better than the MapCHECK 2 when analyzed at 1%/1 mm; the difference was lower for 8 MV and 10 MV. However, the differences were not statistically significant for all criteria and energies (p-values >0.05). The EPID-based QA showed large off-axis over-response and dependence of ${\gamma}$ passing rate on energy, while the MapCHECK 2 was susceptible to the MLC tongue-and-groove effect. The two fluence-based QA techniques can be an alternative tool of VMAT QA to each other, if the limitations of each QA method (mechanical sag, detector response, and detector alignment) are carefully considered.

• Journal of environmental and Sanitary engineering
• /
• v.18 no.4
• /
• pp.52-63
• /
• 2003

This paper investigated Taxi drivers physical subjective symptoms and what factors were interviewed caused the symptoms. The 600 owning taxi-drivers in Seoul during four months from August 1st, 2003 to November 30th, 2003. 1. The average age of the owning taxi-drivers was generally quite high 54 years old. It was very high index compared with the Todai Health Index(THI) and Cornell Medical Index(CMI) of health check tables. 2. According to the age in THI health check table, the complains of mental subjective symptom by reason of age was high among 31 to 40 years old. People who belonged that age group showed high fabrication(L), digestion(C) and aggressiveness(F). The results showed the complains of mental subjective symptom. All items except tiredness(I), melancholia(N), and hypersensitivity(P) were commonly reported by people in their sixties. On the other hand, melancholia(N) and hypersensitivity(P), people in their forties were investigated highly. Statistically, the items of heartㆍblood stream(C) and digestion(D) systems were similar between the two ages, but anger(Q) was different. (p<0.05) 3. From the complains of mental and physical subjective symptoms about work satisfaction on the THI health check table, all items except eyeㆍskin trouble(B) showed strong dissatisfaction. From the complains of mental and physical subjective symptoms about work satisfaction on the CMI health check table, the items of respiratory system(B), digestion(D), nervous system(G), miscellaneous(K), inadequancy(M), and anger(Q) showed similar results. Otherwise, heartㆍblood stream(C) showed statistically different. 4. From the complains of mental and physical subjective symptoms on salary satisfaction in the THI health check table, in the case of people receiving around 1 million won, the complains of physical symptoms showed high among all items except for the respiratory(A) and digestion(C) systems. The eyeㆍskin trouble(B) item showed statistical similarity. The complains of mental and physical subjective symptoms according to a salary degree on the CMI health check table was completely different from the above results. In people received around 1~1.5million won, all items except anxiety(O) showed high. The hypersensitivity(P) item showed statistically different.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.26-32
• /
• 2008

Middle Route Project, the largest water conveyance system in China delivers the water of Changjiang River to North China. In order to create canal operation simulation system, mathematical models are established based on the analysis of hydraulics about steady flow, unsteady flow, and check gate. By simulating the canal operation behavior, we improved the check gate control algorithm and predicted the change process of water surface and flow profile which is very valuable to actual canal operation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.1102-1107
• /
• 1992

Existing CAD systems do nto provide the advanced function for systematic checking of design and drafting errors in mechanical drawings. This paper describes a method for sytematic checking of global parts in mechanical drawings. The checking items are deficiency and redundancy of dimensions, input-errors in dimension figures and symbols, etc. Checking for deficiency and redundancy of global dimensions has been performed applying Graph Theory. This system has been applied to several examples and we have confirmed the feasibility of this checing method.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2002.11a
• /
• pp.173-178
• /
• 2002

An increase in population of advanced age people according to medical development and progress of small family system by industrial development, changed our traditional large family system and paved way for creating a new dwelling culture in Korea. The purpose of this study are consisted of user paid welfare housing for elderly, pointing out the typical problems on present the elderly housing by check- list.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.3
• /
• pp.161-168
• /
• 1998

This paper presents the on-vehicle information system that displays the states of the vehicle in brief words instead of symbols. Main functions of this system include a system check function, trip function, warning function, and clock function. With this system, a driver can obtain all sorts of useful information related to various conditions of the vehicle, and if any problem arises in the vehicle, he can recognize it by the displayed words with a warning sound. Also, this system is very helpful for safety driving because it displays whatever a driver wants to have concerning trip information. By experimental test and driving test, the development system shows good results for each function.

• Journal of Power System Engineering
• /
• v.3 no.4
• /
• pp.28-35
• /
• 1999

An application of scroll compressor to the residential air conditioning and heat pump markets has generated many reliability problem, especially abnormal noise. Most of these noise problems is due to the check valve and compliance between FS(Fixed Scroll) and OS(Orbiting Scroll). FS and OS are the main parts of scroll compressor and are the main pumping part. But check valve has the role of protection of reverse rotation of OS when power is off. Check valve have several noise problems. Among them, shut down noise and valve movement noise is more than severe than any other problem. In this paper covers with these two noise problem.