• Journal of Biomedical Engineering Research
• /
• v.8 no.2
• /
• pp.231-240
• /
• 1987

This Paper introduces a new design of motorized wheel chair for the disabled, which is intended to improve the quality of the disabled's indoor life. This vehicle was based on high manoeuvrability of the omnidirectional drive and saftey. Usually, the vehicle controlled by a joystick but also the voice control system to be prepared for the severely disabled. This voice control system responds to the result of voice recognition, state of system or warning of dangers with voices, which has real time response and 95.3% recognition ratio and satisfactory synthesis voice Quality Therefore this system is able to provide independency in driving and the disabled's daily life.

• Journal of the Korea Furniture Society
• /
• v.23 no.3
• /
• pp.305-316
• /
• 2012

This study considered stools not just as a tool for sitting but with their symbolicity as well. Regarding the changes and meanings of general stools and X-stools, this paper studied their images and explanations as well as literatures by quoting as it limited their range from the ancient times till Neo-classicism. In conclusion, the origin of stools exists in consciousness and also the social hierarchy of authority. There still remain the elements of X in any way along with the functions. This proves that furniture has reason for existence even today not just for its functions but something beyond that. Along with the historic flow of X-stools, we should know that there is diversity of thinking in the area of stools. In understanding furniture design or furniture, now is the time to approach to it in various ways, and it is expected that new design can be born through that thinking.

• International Journal of Fluid Machinery and Systems
• /
• v.6 no.4
• /
• pp.177-187
• /
• 2013

A scaling method valid for most turbomachines based on first principles is derived. It accounts for axial and centrifugal turbomachines with respect to relative gap width/tip clearance, relative roughness, Reynolds number and/or Mach number for design and off-design operation as well. The scaling method has been successfully validated by a variety of experimental data obtained at TU Darmstadt. The physically based, hence reliable and universal method is compared with previous, empirical scaling methods.

• Archives of design research
• /
• v.17 no.1
• /
• pp.347-360
• /
• 2004

This study concerns the structural analysis of chairs, that are significant in the history of furniture, for objective data by taking 347 samples. Categorical standards have been made that are all applicable to these samples, and they are organized in 43 different structural cases. From this, we can discover 6 structural complicity connected in its form which provides a penetrating perspective for the structure of chairs.

• Journal of the Korea Furniture Society
• /
• v.27 no.4
• /
• pp.343-351
• /
• 2016

This study was jointly conducted by the department of nursing science in a college of natural sciences and the furniture design department in the art and physical education to research the critical factors for the furniture development for the Elderly in consideration of the surging number of senior citizens not only in Korea but also globally. On the basis of the Elderly's physical and mental characteristics investigated by the department of nursing science, the furniture design guideline for the Elderly was presented. The following points should be considered at designing the furniture for the Elderly. First, multiple functions like chair with removable toilet bowl and part lighting in bed are advantageous. Second, the dimension of furniture such as chair, bed and sofa should be ergonomically thought in terms of structure for the Elderly's convenience. Third, the bright and vivid color of furniture should be chosen from the aspect of the design, while the different kinds of blue should be avoided. Small patterns and high glossy are not recommendable, but various kinds of feelings in different shapes are suggested. Forth, the material should contribute to the fracture prevention and for that sponge, fabric and leather smoothing the surface of furniture are recommendable as the finishing treatment in a wide variety of colors.

• Proceedings of the KSR Conference
• /
• 2006.05b
• /
• pp.1112-1117
• /
• 2006

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.1327-1328
• /
• 2010

• Archives of design research
• /
• v.12 no.3
• /
• pp.73-80
• /
• 1999

Many domestic users complain about severe pain to the waist, neck, and shoulder as well as work performance because the domestic chair design was developed with western anthropometry dimension and design criteria. Ergonomic design standards are needed for office chair design to reduce stress and poor physical posture for various user body types. In this study, we have suggested design dimensions recommended from previous studies and Korean anthropometry data. We also have reviewed users' preference dimension through measured subjects and analyzed differences between users' preference dimension and the previous design criteria to verify physical appropriateness. We evaluated general office chairs and adjustable chairs which can adjust to fit each person. we also analyzed how each design dimension was reached and affected the human body by evaluation of physical discomfort and comfort. We have found seat height is very important in a workstation. If the seat height is high, it effects the thigh. If width, height, and angle of the backrest are wrong, fatigue to the shoulder, neck, and waist, etc.. As a result of this experiment, we suggested that the height of a seat for Koreans be 425mm for the fixed type and 365-484mm for the adjustable type. Also other design recommendations were suggested in the thesis. In conclusion, our research will be very important in the database because it provides adjustable ranges to fit user's body types in the various design fields.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.2
• /
• pp.357-363
• /
• 2011

Objective: The aim of this study is to set the design direction of the lift chair's tilting seat for development. Background: Great attention has been shown to the development of senior friendly product, because of increasing elderly population rapidly in Korea. Therefore, we need to study on sit-to-stand(STS) motion of elderly systematically for developing lift chair that is one of senior friendly products. Method: In this study, we analyzed joint moment(knee, hip) and muscle activity (Erector spinae, Rectus femoris, Vastus lateralis) on STS motion of elderly(female, 60~70: 7) and young people(female, 20~30: 7) using 3 dimension motion capture camera, force plate, wireless EMG. Results: The results of muscle activity showed a similar trend but the results of joint moment were a lot of differences between the young and the elderly. Conclusion: The results of knee joint moment suggest the angle(10~30deg)-adjustable seat that can be better than to find the optimal seat's angle. Application: The method and results of this study are expected to develop senior friendly product and verification as well as be available to various application.

• Journal of The Korean Association For Science Education
• /
• v.9 no.2
• /
• pp.47-53
• /
• 1989

The standard of chair and desk is decided to design a science laboratory which would help students giving the chance to show their ability and participating spontaneously. The standard is come by the middle school students physical size of the 1986 national physical standard and they are classified into large, medium and small size. The size of laboratory is determined by the size of desk. the distance between desks and the number of students accommodated. By the middle school students physical standard, the heights of chair are 32, 34, 37cm and the widths of chair are 35, 37, 40cm. The desks heights are 53, 58, 63cm and the size is $110{\times}160cm$. The distance between rear and front of desk is 120cm and the left and right side of desk is 150cm. When 24, 36, 60 students are accommodated in laboratory, the size of laboratories are $9.6{\times}10.5m$, $12.7{\times}10.5m$ and $18.8{\times}10.5m$ respectively.