• Advanced Composite Materials
• /
• 제16권2호
• /
• pp.135-149
• /
• 2007

In the automobile industry, structural health monitoring of fiber reinforced polymer composite parts is a widespread need for maintenance before breakdown of the functional elements or a complete vehicle. High performance sensors are generally used in many of the structural health monitoring operations. Within this study, a carbon fiber sewing thread has been used as a low cost laminate failure sensing element. The experimentation plan was set up according to the electrical conductance and flexibility of carbon fiber threads, advantages of preforming operations, and sewing mechanisms. The influence of the single thread damages by changing the electrical resistance and monitoring the impact location by using carbon thread sensors has been performed. Innovative utilization of relatively cost-effective carbon threads for monitoring the delamination of metallic inserts from the basic composite laminate structure is a highlighting feature of this study.

• 공업화학
• /
• 제30권1호
• /
• pp.23-28
• /
• 2019

탄소 실의 표면에 코팅 된 3차원 다공성 그래핀으로 구성된 슈퍼커패시터 케이블 소자를 보고하고자 한다. 그래핀의 3D 다공성 구조는 그래핀옥사이드로 코팅된 탄소 실을 사용하여 마이크로웨이브 활성화 방법에 의해 제작하였다. 마이크로파 조사의 사용은 환원제 없이 그래핀옥사이드를 환원된 그래핀옥사이드로 전환시키고 그래핀 시트를 박리 및 다공성 그래핀 시트로 활성화시켰다. 두 개의 와이어 전극을 고분자 겔 전해질과 결합하여 성공적으로 케이블 구조 형태의 슈퍼커패시터 소자를 제작하였다. 슈퍼커패시터 케이블은 매우 유연하기 때문에 다양한 형태의 장치로 변형될 수 있고 섬유 품목으로 통합될 수 있다. 주사 속도 10 mV/s에서 38.1 mF/cm의 높은 정전용량이 얻어졌다. 이용량은 500 mV/s에서 원래 값의 88%를 유지하였다. 장수명특성은 구부러진 형태에서도 10,000회 동안 충전/방전 과정을 반복함으로써 96.5%의 높은 정전용량 유지율을 증명하였다.

• Advanced Composite Materials
• /
• 제16권2호
• /
• pp.95-113
• /
• 2007

Experimental investigations of interlaminar mechanical properties for carbon fiber reinforced plastic (CFRP) laminates were carried out using aramid fiber ($Kevlar^{(R)}$-29 1000d) and carbon fiber (TR40-1K 612d, Mitsubishi Rayon) stitching. Various carbon fiber (CF) stitch densities were used to prepare a number of CF stitched CFRP laminates for double cantilever beam (DCB) tests. An insert tongue-type loading fixture, developed by the Japan Aerospace Exploration Agency (formerly the National Aerospace Laboratory of Japan), was also employed in the DCB test. Interlaminar tension tests were carried out under an out-of-plane directional loading using a single CF stitch thread in the CFRP laminates. The DCB test results clarified that the relationship between the volume fractions of the CF stitch thread ($V_{ft}$) and mode I critical energy release rate ($G_{Ic}$) showed a mostly linear function with a higher gradient than that of the $Kevlar^{(R)}$ stitched CFRP laminates. The CF stitched CFRP tension test results indicated that the consumption energy per unit area ($E_i$) was larger than that of $Kevlar^{(R)}$ stitched CFRP laminates.

• 한국초등과학교육학회지:초등과학교육
• /
• 제23권2호
• /
• pp.152-158
• /
• 2004

The purpose of this study was to find the difficulties and problems in the carbon dioxide production experiment and to suggest the device for the improvement. Many students have misconception for the smell of carbon dioxide. I found that the smell of carbon dioxide of producting through the experiment didn't concern with the quantity of calcium carbonate. I certificated that the smell of carbon dioxide was related with the concentration of hydrochloric acid. I built two trap applicaing suction in the gas production device to exclude fully the smell of carbon dioxide. So the smell of carbon dioxide was not present by passing the two trap. To find the ideal experimental conditions I perform the experiment step by step. As the result enough carbon dioxide to use for the property experiment was collected under the condition that is 60 mL of 3 molarity hydrochloric acid and 30 g calcium carbonate. I certificated to mesuring flowing quantity of carbon dioxide using the flow meter of carbon dioxide. In the improvement experiment of the property of carbon dioxide, I proposed the experiment device regarding as spreading of the gas and children's interest. To improve the problem of gas production experiment, I proposed the gas certification device using a thread.

• 복식
• /
• 제55권8호
• /
• pp.73-84
• /
• 2005

Collections in the buddhist statue owned by Dr. Jong-Hm Baik(白宗欽) included 3 ancient documents and 2 wooden cylinders that showed a clear historical order. The temple and buddhist statue that these objects were belonged to were not known, however, according to the document, it could be inferred as Chunsukwaneumsang(천수관음상) created in 1322 and reformed in 1614 from the list of donator for the statue. Inside a wooden cylinder, a bundle of ivory, yellow, green, orange, and dark brown fabrics that were folded up and tided up with 5 different colored thread strands and aromatic trees and rice plant was placed on the bottom. All the fabrics were silk. Three thread strands were silk. The white and blue strands were cotton fibers as a result of analysis of IR spectrum and the microscope. According to a radioactive carbon isotope dating by accelerator mass spectroscopy, years before present was 160$\pm$40, and cablibrated ages were 1680-1890 (79.3$\%$), 1910-1960(16.1$\%$) in 95.4$\%$ probability. Accordingly, the fabrics in the buddhist statue proved to be reformed in 1614 not the original ones in 1322.

• 한국압력기기공학회 논문집
• /
• 제15권1호
• /
• pp.62-70
• /
• 2019

The APR1400 reactor may be operated for a long time under high temperature and pressure conditions, causing damage to the stud holes and causing stud bolts and holes to stick. The present practice is to manually remove the anti-sticking agent and foreign matter remaining in the APR1400 reactor stud hole and to visually check the surface condition of the thread to check the damage status of the threads. In the case of the APR1400 reactor stud holes, manually cleaning the threads increases the risk of radiation exposure and operator's fatigue. To avoid this, the autonomous mobile robot is used to automatically clean the reactor stud holes. The purpose of this study is to optimize the cleaning performance of the mobile robot by looking at the behavior of the surface roughness of the stud surface cleaned by the brush attached to the mobile robot due to changes in brush material, thickness of wire, and rotation speed. A microscopic approach to the surface roughness of the flank is needed to investigate the effects of the newly proposed brush of the autonomous mobile robot on the thread holes. According to this experiment, it is reasonable to use STS brush rather than Carbon one. Optimal operating conditions are derived and the safety of APR1400 reactor stud holes maintenance can be improved.

• The Journal of Advanced Prosthodontics
• /
• 제16권3호
• /
• pp.189-199
• /
• 2024

PURPOSE. This study was conducted to evaluate the effects of plasma treatment of sandblasted and acid-etched (SLA) titanium implants on surface cleansing and osseointegration in a beagle model. MATERIALS AND METHODS. For morphological analysis and XPS analysis, scanning electron microscope and x-ray photoelectron spectroscopy were used to analyze the surface topography and chemical compositions of implant before and after plasma treatment. For this animal experiment, twelve SLA titanium implants were divided into two groups: a control group (untreated implants) and a plasma group (implants treated with plasma). Each group was randomly located in the mandibular bone of the beagle dog (n = 6). After 8 weeks, the beagle dogs were sacrificed, and volumetric analysis and histometric analysis were performed within the region of interest. RESULTS. In morphological analysis, plasma treatment did not alter the implant surface topography or cause any physical damage. In XPS analysis, the atomic percentage of carbon at the inspection point before the plasma treatment was 34.09%. After the plasma treatment, it was reduced to 18.74%, indicating a 45% reduction in carbon. In volumetric analysis and histometric analysis, the plasma group exhibited relatively higher mean values for new bone volume (NBV), bone to implant contact (BIC), and inter-thread bone density (ITBD) compared to the control group. However, there was no significant difference between the two groups (P > .05). CONCLUSION. Within the limits of this study, plasma treatment effectively eliminated hydrocarbons without changing the implant surface.

• Korean Chemical Engineering Research
• /
• 제56권6호
• /
• pp.901-908
• /
• 2018

흑연은 리튬이온전지에 사용 되는 대표적인 음극활물질이다. 그러나 최대 이론 용량이 $372mA\;h\;g^{-1}$으로 제한되기 때문에 고용량의 리튬이온전지 개발을 위해서는 새로운 음극 소재 활물질이 필요하다. 실리콘의 최대 이론 용량은 $4200mA\;h\;g^{-1}$으로 흑연보다 높은 값을 나타내지만 부피 팽창이 400%로 크기 때문에 음극 소재 활물질로 바로 적용하기에는 적합하지 않다. 따라서 부피 팽창으로 인한 방전 용량의 감소를 최소화하기 위해 건식 방법으로 실리콘을 분쇄 하여 기계적 응력 및 반응상의 체적 변화를 감소시키고 입도 제어 된 실리콘 입자에 탄소를 코팅하여 체적의 변화를 억제하였다. 그리고 탄소 섬유를 입자 표면에 실타래처럼 성장시켜 2차적으로 부피 팽창을 제어하고 전기전도성을 개선하였다. 실험 변수에 따른 재료들의 물리화학적 특성을 XRD, SEM 및 TEM을 사용하여 측정하였고 전기화학적 특성을 평가 하였다. 본 연구에서는 실리콘의 수명 특성을 향상시켜 음극 소재 활물질로 사용 할 수 있는 합성 방법에 대하여 알아보았다.

• 한국세라믹학회지
• /
• 제34권8호
• /
• pp.854-860
• /
• 1997

The tribological property of ceramics is very important for use in seal rings, pump parts, thread guides and mechanical seal, etc. In the present study, which RBSC/graphite composites were manufactured by adding graphite powders with different particle sizes to mixtures of SiC powder, metallic silicon, carbon black and alumina, effects on the tribological property of each RBSC/graphite composite was investigated in accordance with the particle size of the added graphite powder. The water absorption, the bending strength and the resistance for the friction and wear were measured, and the crystalline phase and the microstructure were respectively examined by using XRD and SEM. In case that the particle size of the graphite powder was fine(2${\mu}{\textrm}{m}$), the formation of $\beta$-SiC was accelerated, thereby making the increase of the bending strength and the decrease of the water absorption, but no improvement for the tribological properties. Furthermore, in case that the particle size of the graphite powder was some large(88~149${\mu}{\textrm}{m}$), the formation of $\beta$-SiC was not accelerated, to thereby make the decrease of the bending strength and the increase of the water absorption, but the improvement for the tribological property of only the composite having the graphite powder of 20 vol%. In addition, in case that the particle size distribution of the graphite powder was large (under 53 ${\mu}{\textrm}{m}$), there was no improvement for every properties. However, the composites, which the graphite powder with the particle size of 53~88 ${\mu}{\textrm}{m}$ was added in 10~15 vol%, had the most increased resistance for the friction and wear which show the worn out amount of 0.4~0.6$\times$10-3 $\textrm{cm}^2$, and the value of the bending strength is 380~520 kg/$\textrm{cm}^2$.

• 미생물학회지
• /
• 제33권2호
• /
• pp.142-148
• /
• 1997

제한통성 메탄올 자호세균인 Methylovorus sp. strain SS1은 최적 성장 조건하에서는 소량의 세포외 다당류(EPS)를 생산하였지만, 질소원이 결핍된 성장 조건하에서는 성장속도는 느렸지만 다량의 EPS를 생산하였다. EPS는 배지내의 탄소대 질소 비율이 5.2일 때 가장 많이 생산되었다. EPS 생산을 위한 최적 온도는 30^{\circ}C.$이고 최적 pH는 6.5였다. EPS는 탄수화물과 단백질 및 약간의 피루브산으로 구성되어 있었고, 환원당으로는 다량의 포도당과 소량의 mannose가 존재하였다. 에탄올을 처리한 EPS(EPSae)에는 에탄올을 처리하지 않은 EPS(EPSbe)에 존재하던 피루브산이 존재하지 않았고, EPS보다 단백질의 양도 적고 점성도 낮았다. EPSbe의 점성은 NaCl에 의해 큰 영향을 받았는데, 0.5%(w/v) 농도의 NaCl 용액에서도 점성이 크게 떨어졌으며, 높은 온도에서는 점성이 비가역적으로 크게 증가하였다. Gel filtration 방법으로 조사한 EPSae의 분자량은 $2.5{\times}$10^6$ - $3.5{\times}$10^6$이었다. 냉동건조한 다당류를 전자현미경으로 관찰하였을 때, EPSbe는 섬유모양을 하였고, EPSae는 벌집모양의 망상구조를 하고 있었다.