• Clean Technology
• /
• v.27 no.4
• /
• pp.367-371
• /
• 2021

The oxy-combustion system is one of the carbon recovery and storage technologies (CCS: Carbon capture & storage) that performs coal combustion using pure oxygen and recirculated flue gas. This is a technology that facilitates storage of carbon dioxide by generating an exhaust gas consisting of only carbon dioxide without a process of separating carbon dioxide and nitrogen when coal is burned using pure oxygen and recirculated flue gas mixture instead of a conventional air combustion system that produces carbon dioxide and nitrogen mixed exhaust gas. In this study, the characteristics of generated NO and SO₂ as atmospheric pollutants during oxy-combustion were examined using O₂/CO₂ mixed simulation gas. The reaction temperature was varied from 900 ℃ to 1200 ℃ and oxygen partial pressure was varied from 30% to 50%. The results showed that NO and SO₂ concentrations in flue gas increased as the oxygen concentration and the reaction temperature in the furnace increased. The partial pressure of CO₂ in flue gas also increased as the oxygen concentration and the reaction temperature in the furnace increased. As a results of comparing NO production of 30% O₂/CO₂ oxy-combustion with air combustion, NO in flue gas increased with reaction temperature in both experiments and NO of oxy-combustion was 40 ~ 80 ppm lower than that of air combustion.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4698-4706
• /
• 2014

In this study, the simulation was performed for the CO removal process using a composite membrane in DME production. The composite membrane, PEI-PDMS (polyetherimide- polydimethyl siloxane) manufactured by Airrane Co. Ltd., was used in the modeling through a commercial simulation design program, PRO/II with PROVISION 9.2 by Invensys. To simulate the process, the permeability constants of each of the pure component from Airrane Co. Ltd. were determined by regression analysis from the experimental data. The required separation membrane area and utility cost in the CO removal process were obtained using a chemical process simulator and composite membrane with a compatible permeability constant.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.27 no.3
• /
• pp.67-74
• /
• 2024

In the context of rapid temperature rise in mid-to-high latitude regions, cold region wetlands have become a hotspot for current wetland carbon cycle research due to their high sensitivity to climate change. Strengthening the monitoring of CO₂ fluxes in wetland ecosystems is of great practical significance for clarifying the carbon balance of wetlands and maintaining the ecological balance of wetland ecosystems in China's high latitude regions. In this study, the carbon flux (NEE, Net ecosystem exchange; GPP, Gross Primary Production; RECO, Ecosystem response) of Jingxin Wetland was monitored by eddy correlation method from August 2021 to March 2024.2022-2023 shows CO₂ sinks, absorbing 349.4 g C·m^-2·yr^-1 annually. The correlation analysis showed that Ta, VPD and PPFD were the main environmental factors affecting CO₂ flux in Jingxin wetland.

• Journal of the Korean Chemical Society
• /
• v.66 no.5
• /
• pp.416-419
• /
• 2022

• Journal of Wetlands Research
• /
• v.21 no.4
• /
• pp.257-266
• /
• 2019

In this study, we selected 6 vegetation sites (reed community) and 6 non-vegetation sites (tidal flat) in the Muan tidal flat of Hampyeong Bay, and observed seasonal changes in carbon dioxide concentration, flux and soil temperature at low tide conditions. The study was conducted to identify the characteristics of seasonal changes in vegetation and non-vegetation areas through the data observed in May 30, August 8, 2012 and January 31, 2013. The average carbon dioxide concentration in the vegetation area was the highest in winter, followed by spring and summer, and the non-vegetation area showed the same concentration change as the vegetation area. The carbon dioxide flux in the vegetation area showed a positive (+) value in both spring and summer, but it was negative (-) in the winter. The average value of carbon dioxide flux was the highest in spring, but it was almost similar to summer, and winter was the lowest negative value. Non-vegetation areas showed positive emission in spring, and negative uptake in summer and winter; mean values were the highest in spring, and the difference between summer and winter was small. In summary of seasonal change characteristics of the research area, the emission of carbon dioxide was dominant in both areas in spring. In summer, carbon dioxide emission was dominant in the vegetation area, and the non-vegetation area was observed to uptake by photosynthesis of phytoplankton, but it was very small. In winter, changes in flux in both areas were very slight.

• Journal of the Korean Electrochemical Society
• /
• v.11 no.3
• /
• pp.165-169
• /
• 2008

The effect of reduction of carbon dioxide by CODH(Carbon Monoxide Dehydrogenase) was compared on glassy carbon and gold working electrodes. In case of gold electrode, the choice of the optimum applied potential is very important since $H_2$ evolution can be mixed with $CO_2$ reduction. On the other hand, efficient $CO_2$ reduction was observed up to -650 mV vs. NHE on glassy carbon in neutral solution due to the larger overpotential for $H_2$ evolution on glassy carbon surface than that on gold surface. The optimum potential for $CO_2$ reduction was found to be $-570{\sim}600\;mV$ vs. NHE. The current efficiency of $CO_2$ to CO decreased dramatically at more negative potential according to the activity of enzyme decrease and the hydrogen evolution.

• Tribology and Lubricants
• /
• v.24 no.6
• /
• pp.374-377
• /
• 2008

Due to the environmental concerns, especially the greenhouse effect and GWP (Global Warming Potential), the carbon dioxide was investigated as an alternative natural refrigerant to replace HFCs (HydroFluoroCarbons) in refrigerator or air conditioning systems. Because new compressor with carbon dioxide is going to be operated under the high pressure, the tribology of sliding surfaces in the compressor becomes very important. To improve of wear resistance in compressor parts, especially rotary type, the friction and wear characteristics of improved sliding surfaces between vane and flange were evaluated in this paper. The method of reformed sliding surface, such as micro-dimple processes, was applied on surfaces in order to improve the tribological characteristics, and their performances were evaluated experimentally. The vane-on-flange type lubricated sliding tests were performed with a high pressure wear tester using carbon dioxide. Test results showed that the reformed surfaces were very effective to reduce the friction and the wear amounts of vane surfaces. The method of improved surfaces showed good tribological properties at vane and flange.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.5
• /
• pp.38-47
• /
• 2000

Carbon dioxide is a major greenhouse gas causing climate change. This study quantified annual direct and indirect uptake of carbon by urban greenspace, and annual carbon release from vegetation maintenance and fossil fuel consumption. The study area was whole Chuncheon and Kangleung, and also two districts of Kangnam and Junglang in Seoul, cities located in middle Korea. Carbon uptake by urban greenspace played an important role through offsetting carbon release by 6-7% annually in Chuncheon and Kangleung. For Kangnam and Junglang, where the population density was relatively higher, urban greenspace annually offset carbon release by 1-2%. Future possible tree plantings could double annual carbon uptake by existing trees in urban lands (except natural and agricultural lands) of a study city. Based on study results, planning and management guidelines for urban greenspace were suggested to save energy and to reduce atmospheric $CO_2$ concentrations. They included selection of optimum tree species, proper planting location from buildings, design of multilayered planting, amendment of existing regulations for greenspace enlargement, avoidance f intensive vegetation maintenance, and conservation of natural vegetation.

• Applied Chemistry for Engineering
• /
• v.8 no.3
• /
• pp.382-388
• /
• 1997

Reforming of propane by carbon dioxide using NiO/${\gamma}$-$A1_2O_3$ was carried out in a pulse or continuous kid bed reactor. NiO/${\gamma}$-$Al_2O_3$ showed higher dissociation ability of $CO_2$ than NiO/${\gamma}$-$Al_2O_3$, and the former exhibited higher conversion of propane than the latter. The presence of oxygen in the reaction mixture of propane and $CO_2$ increased the conversion of propane and reduced the amount of carbon deposit on the catalyst surface. Mechanical mixture catalyst of NiO/${\gamma}$-$Al_2O_3$ and $Ga_2O_3$ showed higher stability to deactivation than NiO/${\gamma}$-$Al_2O_3$ itself. The synergistic effect between NiO/${\gamma}$-$Al_2O_3$ and $Al_2O_3$ was also observed in this study.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.3
• /
• pp.449-456
• /
• 2016

This study was aimed to quantify the amount of carbon dioxide emissions and to suggest suitable plans which consider the carbon emission reduction in the manufacturing process of the domestic structural glued laminated timber. Field investigation on two glued laminated timber manufacturers was conducted to find out material flow input values such as raw materials, transportation, manufacturing process, and energy consumption during manufacturing process. Based on the collected data and the relevant literatures about life cycle inventory (LCI), the amount of carbon dioxide emission per unit volume was quantified. Results show that the carbon dioxide emissions for sawing, drying and laminating process are 31.0, 109.0, 94.2 kg $CO_2eq./m^3$, respectively. These results show 13% lesser amount of total carbon dioxide emissions compared with the imported glued laminated timber in Korea. Furthermore, it was decreased about 37% when the fossil fuel would be replaced with biomass fuel in drying process. Findings from this study is effectively used as the basic data on the life cycle assessment of wooden building.