• Journal of Fisheries and Marine Sciences Education
• /
• v.20 no.1
• /
• pp.78-89
• /
• 2008

This study is intended to analyse the economic sensitivity of imported fishery products due to decrease in or elimination of tariff rates through the progress of free trade. Forty-seven species of fishes were selected for this study on the basis of the HS Code. The substitution and price effects were calculated using the price elasticities of both domestic and imported demands for fishery products under the assumption of 5% decrease in a tariff rate. Seven main economic variables were extracted from the fishery industry which can mediate the substitution and price effects. A multiple regression analysis was conducted to obtain the influence weights of these main economic variables on both effects. The order of sensitivity of the fishes was calculated using these weights. The 47 fish species were classified into four groups according to their sensitivity based on the means and the standard deviations of their total scores on seven main economic considerations. Nine fish species such as squids, hair tails, shellfishes, and crabs belonged to the hyper-sensitive group, whereas 15 fishes such as eels, sea breams, and sea weeds belonged to the sensitive group. Twelve species including common sea basses, cods, and abalones were among the less-sensitive group, and 11 species including skate rays and mud fishes comprised the non-sensitive group.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.4
• /
• pp.11-16
• /
• 2004

A simple stopping criterion for iterative decoding based on min-sum processing is presented. While most stopping criteria suggested in the literature, are based on Cross Entropy (CE) and its simplification, the proposed stopping criterion is to check if a decoded sequence is a valid codeword along the encoder trellis structure. This new stopping criterion requires less computational complexity and saves mem4)ry compared to the conventional stopping rules. The numerical results are presented on the 3GPP turbo code and a Serially Concatenated Convolutional Cods (SCCC).

• Structural Engineering and Mechanics
• /
• v.27 no.4
• /
• pp.425-438
• /
• 2007

Large changes in stiffness associated with cracking and yielding of reinforced concrete sections may be expected to occur during the dynamic response of reinforced concrete frames to earthquake ground shaking. These changes in stiffness in stories that experience cracking might be expected to cause relatively large peak interstory drift ratios. If so, accounting for such changes would add complexity to seismic design procedures. This study evaluates changes in an index parameter to establish whether this effect is significant. The index, known as the coefficient of distortion (COD), is defined as the ratio of peak interstory drift ratio and peak roof drift ratio. The sensitivity of the COD is evaluated statistically for five- and nine-story reinforced concrete frames having either uniform story heights or a tall first story. A suite of ten ground motion records was used; this suite was scaled to five intensity levels to cause varied degrees of damage to the concrete frame elements. Ground motion intensity was found to cause relatively small changes in mean CODs; the changes were most pronounced for changes in suite scale factor from 0.5 to 1 and from 1 to 4. While these changes were statistically significant in several cases, the magnitude of the change was sufficiently small that values of COD may be suggested for use in preliminary design that are independent of shaking intensity. Consequently, design limits on interstory drift ratio may be implemented by limiting the peak roof drift in preliminary design.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.3
• /
• pp.391-401
• /
• 1999

For proper communication among manufactures in various countries and for consumers' convenience in purchasing garments imported from foreign countries the ISO revised the size designation system in 1969. Since 1970's various countries have revised their standard sizing system by adapting the ISO system . The purpose of this study is (1) to satisfy domestic consumer's needs by developing a sizing system based on that of ISO for Korean women in their early twenties and (2) to contribute to entering the international fashion market by manufacturing high quality apparel products The results were as follows: (1) By measuring and analyzing of 464 female between the ages for 18 and 24 the data indicated that body height could be divided into following three groups. S(Short) : 152cm (19.2%) R(Regular) : 160cm (57.8%) L(Long) : 165cm(22.6%) (2) According to the results to analyzing body type of this study the medium hip(drop 6) is 47.4% the large hip(over drop 12) is 42.7% the 2 types covers 90.3% (3) Comparing Korean women's size with foreign women's size DOB size code is 17 JIS size code is 9AR, FNOR size codes are 36n. 38n. and Italian size cods are 40, 42

• Journal of Electrochemical Science and Technology
• /
• v.12 no.1
• /
• pp.21-32
• /
• 2021

This study reports for the first time the application of electrocoagulation (EC) from laboratory to pilot scales for the treatment of printing wastewater, a hazardous waste whose treatment and disposal are strictly regulated. The wastewater was taken from three real printing companies with strongly varying characteristics. The treatment process was performed in the laboratory for operational optimization and then applied in the pilot scale. The weight loss of the electrode and the generation of sludge at both scales were compared. The results show that the raw wastewater should be diluted before EC treatment if its COD is higher than about 10,000 mg/L. Pilot scale removal efficiencies of COD and color were slightly lower compared to those obtained from the laboratory scale. At pilot scale, the effluent CODs removal efficiency was 81.9 - 88.9% (final concentration of 448 - 992 mg/L) and color removal efficiency was 95.8 - 98.6% (final level of 89 - 202 Pt-Co) which proved the feasibility of EC treatment as an effective pre-treatment method for printing wastewater as well as other high colored and hard-biodegradable wastewaters.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.5
• /
• pp.553-560
• /
• 2015

Fracture mechanics analysis for cracked pipes is essential for applying the leak-before-break (LBB) concept to nuclear piping design. For LBB assessment, crack instability and leak rate should be predicted accurately for through-wall cracked pipes. In a nuclear piping system, elbows are connected with straight pipes by circumferential welding; this weld region is often considered a critical location. Hence, accurate crack assessment is necessary for cracks in the interface between elbows and straight pipes. In this study, the stress intensity factor (SIF) and elastic crack opening displacement (COD) were estimated through detailed 3D elastic finite element (FE) analyses. Based on the results, closed-form solutions of shape factors for calculating the SIFs and elastic CODs were proposed for circumferential through-wall cracks in the abovementioned interfaces under internal pressure. In addition, the effect of the elbow on shape factors was investigated by comparing the results with the existing solutions for a straight pipe.

• Journal of Life Science
• /
• v.9 no.6
• /
• pp.692-697
• /
• 1999

For further removal of non-biodegradable CODs and color in biologically treated distillery waster water, we selected a chemical treatment with Fe(III) and cationic polymers and then another chemical treatment with Fenton reagent. We developed Pregenerated Bubble Flotation(PBF) to effectively remove the chemical sludge from each chemical reaction process. The flotation unit was constructed with hydraulic loading rate, 7 ㎥/$m^2$.hr. The CODMn and suspended solids (SS) in biologically treated distillery waste water were reduced by the first PBF from 310-1096 mg/L to 141-303 mg/L and from 160-990 mg/L to 48-385 mg/L, respectively. Again, after the Fenton reaction process, floated SS was skimmed off at the top of the flotation unit and the final effluent was directly discharged without any tap water dilution. The quality of final effluent can be below 40 mg/L-CODMn but IISan Distilery has been maintained effluent quality of 73 mg/L-CODMn and 10-80 mg/L-SS. The chemical cost was saved by more than 30% as compared with that of prior process.

• Journal of Ginseng Research
• /
• v.3 no.1
• /
• pp.54-65
• /
• 1979

To investigate the feeding value of the concentrated feedstuff including the Korean ginseng meal instead of wheat bran, Holstein milk cows were fed by this feedstuff (10kg/day) for 80 days, and the amounts of milk production and quality of milk were checked. The results are as follows: 1. Milk production of cows fed by the concentrated feedstuff including the ginseng meal was increased as averaged as 1.25kg/day compared with those of controlled cows during same period(SA) and before feeding treatment (SB). Significant different of milk production was found between cows treated and cows of SB plot, but there was no significant difference of milk production between cows treated and cows of SA plot. 2. Milk fat content was significantly increased as moth as 0.22%, 0.69% and 0.455% by the feeding of ginseng meal compared with that of SB Plat and that of SA Plot, and as average value, respectively. 3. Solid not fat (SNF) of milk from cows fed by the ginseng meal was also significantly increased as much as 0.845%, 1.339% and 1.0925 tempered with these of cows before treatment (SB) and cows controlled (SA), and as average value, respectively. 4. Specific gravity of milk produced from cows treated was higher as average as 0.0055 than those of controlled plots (SA and SB). Significant difference of specific gravity was found between cows treated and cows of SA plot, but there was no significant difference between tows treated and cods of SB plot. 5. Acidity of milk produced from cows treated was lower as averaged as 0.0045 than those of controlled plots (SA and SB). Significant difference between cows treated and cows of SA plot was found, but there was no significant difference between cows treated and cows treated and cows of SB plot.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.4
• /
• pp.203-215
• /
• 2006

Field observations on the spatio-temporal distribution of organic matter of the surface sediment were carried out at 15 stations in the central parts of the South Sea of Korea from April 2002 to January 2003. The range of water temperature and salinity in bottom waters, mud content and water content of surface sediment were $8.06{\sim}23.35^{\circ}C,\;29.20{\sim}34.51\;psu,\;71.2{\sim}99.9%$ and $38.7{\sim}68.9%$, respectively. Measured parameters on the surface sediments of ignition loss (IL), chemical oxygen demand (CODs), phaeopigment, particulate organic carbon (POC) and particulate organic nitrogen (PON) also ranged in $3.9{\sim}l2.5%,\;9.60{\sim}44.05\;mgO_2/g-dry,\;1.58{\sim}29.51\;{\mu}g/g-dry,\;3.12{\sim}13.01\;mgC/g-dry$ and $0.49{\sim}2.00\;mgN/g-dry$, respectively. The spatio-temporal distribution of organic matter demonstrated higher concentrations offshore than at lesions near the coastal line. Higher concentrations occurred in the summer and spring. The results indicated that the origin of organic matter in surface sediments in the central part of the South Sea was autochthonous rather than allocthonous because the organic matter had an average C/N ratio of 6.44 (${\pm}0.51$). However, the composition of autochthonous organic matter was mainly derived from detritus rather than living phytoplankton, which was Indicated by the results of the POC/phaeopigment ratio. A principal component analysis (PCA) indicated that 73.2% of the variability in the data was described by two factors: 1) an 'environmental factor concerning the accumulation of materials (57.3%)' and 2) 'origin of organic matter and the composition by primary production (15.9%)'. The sedimentary environment in the central part of the South Sea was divided into four regions from the factor score of the PCA by the concentrations of organic matter and the composition ratio of organic matters from phytoplankton in surface sediments.

• Korean Journal of Ichthyology
• /
• v.19 no.4
• /
• pp.318-323
• /
• 2007

The feeding habits of Pacific cod (Gadus macrocephalus) were studied based on the examination of stomach contents of 192 specimens collected from November, 2005 to January, 2006 in the coastal waters off Gadeok-do, Korea. The size of Pacific cod ranged from 35 to 82 cm in standard length (SL). Pacific cod mainly consumed shrimps such as Eualus spathulirostris, Crogon hakodatei and C. affinis and fishes. Its diet also included small quantities of cephalopods, amphipods, hermit crabs and crabs. Individuals between 35 cm and 45 cm SL mainly consumed shrimps. The portion of shrimps decreased with increasing fish size, and this decrease was paralleled with increased consumption of fishes and cephalopods. In this study we found Syngnathus schlegeli in the stomach contents of many Pacific cod specimens. S. schlegeli is a typical seagrass fish species which inhabits in seagrass beds, This fact means that Pacific cods stay in the seagrass beds during spawning period. Therefore migration of Pacific cod to coastal waters off Gadeok-do during spawning period seems to be a survival strategy for its larvae and small juveniles to stay in seagrass beds which provide with abundant foods and shelters to many commercial fish species.