• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.8 s.338
• /
• pp.7-14
• /
• 2005

This paper presents a new low power BIST TPG scheme. It uses a transition monitoring window (TMW) that is comprised of a transition monitoring window block and a MUX. When random test patterns are generated by an LFSR, transitions of those patterns satisfy pseudo-random gaussian distribution. The Proposed technique represses transitions of patterns using a k-value which is a standard that is obtained from the distribution of U to observe over transitive patterns causing high power dissipation in a scan chain. Experimental results show that the Proposed BIST TPG schemes can reduce scan transition by about $60\%$ without performance loss in ISCAS'89 benchmark circuits that have large number scan inputs.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.7
• /
• pp.74-80
• /
• 2002

VLSI intergrated circuits like SOC(system on chip) often require a multi-clock design style for functional or performance reasons. The problems of the clock domain transition due to clock skew and clock ordering within a test cycle may result in wrong results. This paper describes a new BIST(Built-in Self Test) architecture for multi-clock systems. In the new scheme, a clock skew is eliminated by a multi-capture. Therfore, it is possible to perform at-speed test for both clock inter-domain and clock intra-domain.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.11
• /
• pp.84-91
• /
• 2009

A high speed serial link transmitter using multi-level signaling is proposed. To achieve high data rate m high speed serial link, 4-pulse amplitude modulation (PAM) is used. By transmitting 2 bit data in each symbol time, high speed data transmission, two times than binary signaling, is achieved. The transmitter transmits current-mode output instead of voltage-mode output Current-mode output is much faster than voltage-mode output, so higher data transmission is available by increasing switching speed of driver. $2^5-1$ pseudo-random bit sequence (PRBS) generator is contained to perform built-in self test (BIST). The 4-PAM transmitter is designed in Dongbu HiTek $0.18{\mu}m$ CMOS technology and achieves 8 Gb/s, 160 mV of eye height with 1.8 V supply voltage. The transmitter consumes only 98 mW for 8 Gb/s transmission.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.2
• /
• pp.114-121
• /
• 2013

As the weight of embedded memory within Systems-On-Chips(SoC) rapidly increases to 80-90% of the number of total transistors, the importance of testing embedded memory in SoC increases. This paper proposes IEEE std. 1500 wrapper based Programmable Memory Built-In Self-Test(PMBIST) architecture which can support various kinds of test algorithm. The proposed PMBIST guarantees high flexibility, programmability and fault coverage using not only March algorithms but also non-March algorithms such as Walking and Galloping. The PMBIST has an optimal hardware overhead by an optimum program instruction set and a smaller program memory. Furthermore, the proposed fault information processing scheme guarantees improvement of the memory yield by effectively supporting three types of the diagnostic methods for repair and diagnosis.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.7
• /
• pp.81-88
• /
• 2002

A new pattern generator of BIST based on the pattern clustering is developed. The proposed technique embeds a pre-computed deterministic test set with low hardware overhead for test-per-clock environments. The test control logic is simple and can be synthesized automatically. Experimental results for the ISCAS benchmark circuits show that the effectiveness of the new pattern generator compared to the previous methods.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.2
• /
• pp.105-112
• /
• 1998

In this paper, we propose a ESP(Extended Scan Path) architecture for multi-board testing. The conventional architectures for board testing are single scan path and multi-scan path. In the single scan path architecture, the scan path for test data is just one chain. If the scan path is faulty due to short or open, the test data is not valid. In the multi-scan path architecture, there are additional signals in multi-board testing. So conventional architectures are not adopted to multi-board testing. In the case of the ESP architecture, even though scan path is either short or open, it doesn't affect remaining other scan paths. As a result of executing parallel BIST and IEEE 1149.1 boundary scan test by using the proposed ESP architecture, we observed that the test time is short compared with the single scan path architecture. By comparing the ESP architecture with single scan path responding to independency of scan path, test time and with multi-scan path responding to signal, synchronization, we showed that the architecture has improved results.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.8
• /
• pp.9-16
• /
• 2004

For a System-on-a-Chip(SoC) comprised of multiple IP cores, test control techniques have been developed to perform the internal and external test efficiently relying on the various design for testability techniques such as scan and BIST(Built-In Self-Test). However the test area overhead is too expensive to guarantee diverse test link configurations. In this paper, at first we introduce a new flag based Wrapped Core Linking Module(WCLM) that enables systematic integration of IEEE 1149.1 TAP'd cores and P1500 wrapped cores. Then a simple test control technique, which can interconnect internal scan chains of different cores, is described with requiring least amount of area overhead compared with other state-of-art techniques. The design preserves compatibility with standards and scalability for hierarchical access.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.2
• /
• pp.38-45
• /
• 2014

This paper proposes a characterization method based on the reference memory to characterize memory compiler quickly and accurately. In order to maintain the accuracy of the memory complier and to minimize characterization time, the proposed method models the trends of the generated memories by selecting the reference memories after analyzing the timing trends of the memory compiler. To validate the proposed method, we characterized the 110nm memory compiler derived from 130nm memroy compiler. The average error rate of the characteristics of the memories generated by the proposed method and SPICE simulation is lower than ${\pm}0.1%$. Furthermore, we designed memory BIST test chips at 110nm and 180nm processes and the results of the function test show that the yield is 98.8% and 98.3%, respectively. Therefore, the proposed method is useful to characterize the memory compiler.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.2
• /
• pp.127-138
• /
• 2007

In this paper, we propose a new X-masking scheme for utilizing logic built-in self-test The new scheme exploits the phase-shifting network which is based on the shift-and-add property of maximum length pseudorandom binary sequences(m-sequences). The phase-shifting network generates mask-patterns to multiple scan chains by appropriately shifting the m-sequence of an LFSR. The number of shifts required to generate each scan chain mask pattern can be dynamically reconfigured during a test session. An iterative simulation procedure to synthesize the phase-shifting network is proposed. Because the number of candidates for phase-shifting that can generate a scan chain mask pattern are very large, the proposed X-masking scheme reduce the hardware overhead efficiently. Experimental results demonstrate that the proposed X-masking technique requires less storage and hardware overhead with the conventional methods.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.2
• /
• pp.14-25
• /
• 1999

The IEEE standard 1149.1, which was proposed to increase the observability and the controllability in I/O pins, makes it possible the board level testing. In the boundary-scan environments, many shift operations are required due to their serial nature. This increases the test application time and the test application costs. To reduce the test application time, the method based on the parallel opereational multiple scan paths was proposed, but this requires the additional I/O pins and the internal wires. Moreover, it is difficult to make the designs in conformity to the IEEE standard 1149.1 since the standard does not support the parallel operation of data shifts on the scan paths. In this paper, the multiple scan path access algorithm which controls two scan paths simultaneously with one test bus is proposed. Based on the new algorithm, the new algorithm, the new board level BIST architecture which has a relatively small area overhead is developed. The new BIST architecture can reduce the test application time since it can shift the test patterns and the test responses of two scan paths at a time. In addition, it can reduce the costs for the test pattern generation and the test response analysis.