• Journal of the Korean Society for Heat Treatment
• /
• v.25 no.5
• /
• pp.244-248
• /
• 2012

ITO/$TiO_2$ films were deposited by RF magnetron sputtering on glass substrates and then the effect of vacuum annealing on the structural, optical and electrical properties of the films was investigated. The structural, optical and electrical properties are strongly related to annealing temperature. The films annealed at $300^{\circ}C$ showed a grain size of 40.9 nm, which was larger than as-deposited amorphous films. The optical transmittance in the visible wavelength region also increased, while the electrical resistivity decreased. The ITO/$TiO_2$ films annealed at $300^{\circ}C$ showed the highest optical transmittance of 81% and also showed the lowest electrical resistivity of $3.05{\times}10^{-4}{\Omega}cm$, in this study.

• The KIPS Transactions:PartC
• /
• v.12C no.6 s.102
• /
• pp.793-798
• /
• 2005

We focus on the RP (Rendezvous Point) system model in the multicast network based on BcN (Broadband Convergence Network) integrating broadcasting, telecommunication and Internet with one. Based on the condition multiple queues with different service and single server, when the arrivals tome in group with the site of the group geometrically distributed, we define the relationship between incoming arrival rate and corresponding buffer size. We also investigate the Profit according to both Service Provider and Network Operator Then we make a decision whether a new service request is accepted or not based on given interning rate range.

• KIEAE Journal
• /
• v.11 no.6
• /
• pp.139-149
• /
• 2011

This study focuses on design tendencies in office buildings of public institutions after tightening up Korea's building energy performance criteria. Important office design criteria and recommendations pay attention to the issues such as building orientation, greening buildings, building form, space and envelop by intensifying building energy performance related laws, government guidelines and evaluation systems. The design tendencies explored in this research are as follows. Office buildings mainly face south and have various types of indoor and roof green spaces not for ecological reasons but for the rest. Building depth becomes thinner and atria are inserted into office buildings to improve daylighting and natural ventilation. Building cores are located on north or west and east sides acting as buffer spaces to reduce heat loss and to block solar radiation. Office building envelop design includes various creative ideas to control or utilize solar energy as like three dimensional or double structured skin and window size variation to cope with the intensity of solar radiation. Further, solar energy generation systems are integrated with building component such as roofs, sun screens and windows. This study demonstrates that government's reinforcement of the building energy performance criteria drives the change in design methods and approach.

• Progress in Superconductivity
• /
• v.12 no.1
• /
• pp.68-73
• /
• 2010

Y123 films have been deposited on $LaAlO_3$ (100) single-crystal and IBAD substrates by spray pyrolysis method using nitrate precursors. Ultrasonic atomization was adopted to decrease the droplet size, spraying angle and its moving velocity toward substrate for introducing the preheating tube furnace in appropriate location. A small preheating tube furnace was installed between spraying nozzle and substrate for fast drying and enhanced decomposition of precursors. C-axis oriented films were obtained on both LAO and IBAD substrates at deposition temperature of around $710{\sim}750^{\circ}C$ and working pressures of 10~15 torr. Thick c-axis epitaxial film with the thickness of $0.3{\sim}0.6\;{\mu}m$ was obtained on LAO single-crystal by 10 min deposition. But the XRD results of the film deposited on IBAD template at same deposition condition showed that the buffer layers of the IBAD metal substrate was affected by long residence of metal substrate at high temperature for YBCO deposition.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.589-589
• /
• 2012

Indium sulfide thin films have been grown onto glass substrates using radio frequency magnetron sputtering at room temperature. The as-deposited film were annealed in nitrogen atmosphere at different temperatures of 100, 200, 300, 400 and $500^{\circ}C$ with an 1 h annealing time. The effect of annealing temperature on composition, structure, morphology and optical properties of the as-grown In2S3 films has been studied. The XRD results indicate that the as-deposited films are composed by a mixture of both cubic ${\alpha}$ and ${\beta}$ crystalline phases, with some fraction of tetragonal phase. The thermal annealing on the films produces the conversion of the cubic crystalline phases to the tetragonal ${\beta}$ one and a crystalline reorientation of the latter phase. The surface morphological analysis reveals that the films grown at $300^{\circ}C$ have an average grain size of ~ 58 nm. These films show a S/In ratio of 0.99. The optical band gap is found to be direct and the films grown at $300^{\circ}C$ shows a higher optical transmittance of 80% and an energy band gap of 2.52 eV.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.3
• /
• pp.29-40
• /
• 1997

Two asymptotic analyses of the queue length distribution at a statistical multiplexor supporting heterogeneous exponential on-off sources are considered. The first analysis is performed by approximating the cell generation rates as a multi-dimensional Ornstein-Uhlenbeck process and then applying the Benes queueing formula. In the second analysis, w state with a system of linear equations derived from the exact expressions of the dominant eigenvalue of the matrix governing the queue length distribution. Assuming that there are a large number of sources, we obtain asymptotic approximations to the dominant eigenvalue. Based on the analyses, we define a traffic descriptor to include the mean and the variance of the cell generation rate and a burstiness measure. A simple expression for the quality of service (QoS) in cell loss rate is derived in terms of the traffic descriptor parameters and the multiplexor parameters (output link capacity and buffer size). The result is then used to quantify the factors determining the required capacity of a call taking the statistical multiplexing gain into consideration. As an application of the analyses, we can use the required capacity calculation for simple yet effective connection admission control(CAC) algorithms.

• YAKHAK HOEJI
• /
• v.41 no.1
• /
• pp.30-37
• /
• 1997

In order to formulate a controlled release system for oral drug delivery, the microcapsules were prepared in w/o emulsion containing cefaclor as a water-soluble model drug by th e method of interfacial polycondensation. Gelatin wis selected as a suitable polymer for interfacial polycondensation. Gelatin solution containing drug was emulsified in an organic phase under mechanical stirring. After emulsification, terephthaloyl chloride was added as cross linking agent, followed by mechanical stirring, washing and drying. Physical characteristics of microcapsules were investigated by optical microscopy, scanning electron microscopy and particle size analysis. Mean particle sizes of gelatin microcapsules were, in the range, of about 20~50 ${\mu}$m. The microcapsules were in good apperance with spherical shapes before washing, but were destroyed partially after washing and drying, even though some microcapsules were still maintained in their shapes. Contents of cefaclor in the microcapsules were calculated by UV spectrophotometry after 3 days extraction with pH 4 carbonate buffer solution. The effects of cross linking time. pH. concentration of cross-linking agent, and temperature on drug release kinetics have been discussed extensively.

• Journal of the Korea Society of Computer and Information
• /
• v.5 no.4
• /
• pp.82-89
• /
• 2000

This study analyzes the cell loss probability of an ATM multiplexer with real time and non-real time bursty traffics. It is assumed that an ATM multiplexer with loss priority control for the analysis. The loss priority control uses the CLP Reld of cell header. For easy analysis and less computation. the multiplexed traffic of the ATM multiplexer was modeled by the MMDP. The ATM multiplexer is simulated by the MMDP/MMDP/l/K queueing system. From the above results, The connection admission of an ATM multiplexer with loss priority control is determined by the cell loss probability with low priority as well as the size of threshold buffer. Therefore, to increase the statistical multiplexing gain it will be good to utilize the loss priority control in order.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.264-267
• /
• 2002

This paper presents the design of a pipelined virtual output queue routing engine for an advanced input-queued ATM switch, which has a serial cross bar structure. The proposed routing engine has been designed for wire-speed routing with a pipelined buffer management. It provides the tolerance of requests and grants data transmission latency between the routing engine and central arbiter using a new request control method that is based on a high-speed shifter. The designed routing engine has been implemented in a field programmable gate array (FPGA) chip with a 77MHz operating frequency, 16$\times$16 switch size, and 2.5Gbps/port speed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.5
• /
• pp.892-900
• /
• 1994

Recently, ITU-TSS recommends a service specific connection oriented protocol (SSCOP) which assures the successful transmission of signalling information for B-ISDN. In the SSCOP, there is a mechanism to exchange periodically status informations for both error and flow controls. In this paper, we analyze the SSCOP with a discrete-time queueing model. We consider two cases for link-by-link and end-to-end controls. As the performance measures, we investigate delay, throughput, and buffer size of the receiver. The average values of these measures are analyzed with respect to the loss probability of messages, the traffic load, and the exchange period of status information. We also verify the accuracy of this model with simulations.