• Journal of Biosystems Engineering
• /
• 제26권4호
• /
• pp.323-330
• /
• 2001

The regular maintenance and repair status of major farm machinery such as power tiller, farm tractor, rice transplanter and combine harvester etc., were surveyed and analyzed for the full-time farmers in order to get basic information for promoting farm machinery productivity. The survey was carried out through 209 farmers from 9 provinces. The results of this study can be summarized as follows; 1. The regular maintenance of farm machinery was conducted at repair shop(49.5%) or dealer agency(12.0%), and also conducted by farmers at their house(34.9%). 2. For the status on the cleanness or exchange times of engine oil, fuel filter and air cleaner, most farmers conducted fewer times than the necessary times. And, 5.3%, 7.7%, and 2.9% of surveyed farmers experienced breakdowns due to the insufficient cleanness or exchange oil, fuel filer, and air cleaner, respectively. 3. Most farmers(76.1%) recognized the necessity of farm machinery training or education, and they preferred one week for the training period, simple or easy maintenance for the training level, agricultural technical center or farm machinery manufacturer for the training agency. 4. Complete recognition of operation manual and sufficient maintenance before-, during-, and after-operation for the farm machinery can minimize the breakdowns, enlarge the endurance prevent the safety accidents, and promote productivity of farm machinery. And, these can be accomplished by the thorough training or education for agricultural machinery.

• 교육시설 논문지
• /
• 제24권6호
• /
• pp.11-18
• /
• 2017

Education facilities have much affect to make a good condition for the learning environment. Therefore, various approaches have been conducted to improve the physical, social and educational achievement. Especially, the physical aspect is very important to get rid of the building defect and improve the student their learning environment. For these, it needs to explain the performance and function of components and materials, which is linked with the deterioration degree. The deterioration degree is a imperative factor to make a decision whether the component would be repaired or not and to provide the repair scope of its component. In this paper, it aimed at making the deterioration degree model of roof proof under the hypothesis of which deterioration degree would be equal the repair cost at this time. Results of the study are shown that first, the $3^{rd}$ function is most proper to explain the deterioration degree model among 11 functions in view of resulted statistics. Second, the inflection of deterioration is shown at 15yr of the elementary school and 13yr of the middle and high school. This study has a limit of disclassification of the component or materials and it is, therefore, favorable to include the classification of waterproof material and work. These results would make a change from the breakdown maintenance to preventive maintenance and give a decent the learning environment for student.

• 한국건축시공학회지
• /
• 제21권3호
• /
• pp.221-229
• /
• 2021

시대적 요구 및 변화에 따라 공공임대주택이 증가하고 있으나 관리적 측면에서의 선진화가 부족한 실정이다. 국내 건축물 자산관리는 여전히 고장 후 수리의 개념에서 벗어나지 못하고 있어 공공재로서의 자산관리 개념의 도입을 통한 사회적 비용 절감이 필요한 실정이다. 이에 본 연구는 국내외 문헌의 고찰을 통해 국내 공공임대주택 자산관리의 개념과 기존의 평가지표를 파악하여 공공임대주택 자산관리를 위한 관리 지표를 제시하는 것을 목적으로 한다. 이를 위해 본 연구는 해외에서 제시하고 있는 관리요인을 파악하고 국내 공공임대주택의 수선 사례 및 이력을 분석하여 국내 실정에 적합한 지속가능한 관리 지표를 제시하였다. 이를 통해 본 연구는 향후 공공재로서의 임대주택 관리를 위한 기본 방향을 제시하였다.

• 한국건설관리학회논문집
• /
• 제12권6호
• /
• pp.101-109
• /
• 2011

온실가스 배출로 인한 기후변화가 심각한 문제로 대두되면서, 국내 외에서 건물 에너지 절감을 위한 노력이 전개되고 있다. 특히, 국내 주거용 건축물 사용단계의 에너지 사용에 따른 온실가스 배출량은 전 생애주기에서 매우 큰 비중을 차지하고 있으며, 노후 공동주택의 수가 급격히 증가하고 있는 상황에서 기존 공동주택의 개선을 통한 에너지 절감의 중요성은 더욱 높아지고 있다. 그러나, 기존 공동주택의 개선에 대한 의사결정 과정에서, 에너지 절감에 대한 부분은 주요 고려사항으로 반영되지 못하고 있으며, 이를 반영하기 위해 필요한 의사결정 지원도구 역시 미비한 실정이다. 본 논문은 공동주택 개선여부의사결정 단계에서 활용할 수 있는 의사결정 지원 시스템을 개발하는 첫 단계로서, 유사 특성을 지닌 공동주택 단지간의 군집을 형성하는 분류체계를 구축하고자 했다. 이를 위해 데이터마이닝 기법 중 하나인 의사결정나무를 활용하여 공동주택 단지 특성 및 전력, 가스, 지역난방 에너지 사용량 기반의 군집을 형성했다. 향후 본 연구의 결과를 더욱 발전시켜 공동주택 개선단계에서의 의사결정 시 에너지 사용량을 고려사항으로 반영함으로써, 노후 공동주택 개선을 통한 에너지 절감 및 이산화탄소 배출량 감축 효과를 극대화할 수 있을 것으로 기대된다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.423-427
• /
• 2009

전력계통이 초고압, 대규모화되고 이를 구성하고 있는 대용량 전력설비들의 고신뢰도 운전이 한층 요망되고 있는 환경에서 예방진단기술을 활용한 설비운영의 중요성은 나날이 커지고 있다. GIS 등 설비의 최적화 및 효율적인 관리를 위한 예방진단기술의 정착은 현재 유지보수 비용의 절감과 설비의 안정성 향상 및 체계적인 운영을 가능하게 한다는 점에서 전력설비의 성공적인 운영에 없어서는 안 될 핵심기술로서 자리매김하고 있으며, 설비의 잔존수명예측 등 향후 예방진단기술의 발전을 위한 지속적인 연구와 관심이 뒷받침되어져야 할 것이다.

• 한국항공운항학회지
• /
• 제23권4호
• /
• pp.117-124
• /
• 2015

RAM (Reliability, Availability and Maintenance) has been applied to design and analysis tools which affects system's operational sustainability and its life cycle cost as RAM-c(2009 DoD). RAM-c plays also an important role to guarantee the system engineering for mission assurance. Reliability is highly related to the probability of system failure. Availability means mission capability or the condition of ready to mission. Maintenance includes both the repair to recover the system in the event of failure/unexpected breakdown and proactive maintenance to prolong the design service life of the system or machinery. It is the purpose that this paper is to analyze and conclude the objective service life of UAV. The more UAV is operated, the less the level of its reliability becomes. Repairing failures and supplying spare parts on time, system reliability could be improved up until the time over target. Applying statistical Weibull distributions, this paper suggests the analysis of the design service life and economic life of UAV based on RAM-c with operational data.

• 대한안전경영과학회지
• /
• 제7권1호
• /
• pp.101-115
• /
• 2005

This study deals with the procedure of safety improvement, productivity increase ,and tact-time reduction through setting up the system about preventive maintenance. Actually, it is hard to establish and carry out preventive maintenance, even though we recognize the importance of the system concerning time, cost, labor, and so forth. In this study in the viewpoint of cost we are for achieving maximum efficiency by change and reduction of planning process adapted to the special work group. At first we briefly will mention the kind ,the necessity ,and the concept of preventive maintenance ,and then divide the equipment used in the assembly line into the two whether it is necessary or not by way of estimating the breakdown loss ,comparing with general establishment of preventive maintenance and modifying it to the case. At the second step we will establish the operation system of plan management related to production and quality in the special case. Check period and category will be set by dividing the assembly equipment into LCL and Focus in the third step. The forth step will contain the operation procedure in detail. And then we must make check and repair record periodically. Finally, on the basis of the record the selection of checking of significance will be conducted. This results in safety improvement, tact time reduction, and productivity improvement.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 추계학술대회
• /
• pp.131-141
• /
• 2004

This study deals with the procedure of safety improvement, productivity increase, and tact-time reduction through setting up the system about preventive maintenance. Actually, it is hard to establish and carry out preventive maintenance, even though we recognize the importance of the system concerning time, cost, labor, and so forth. In this study in the viewpoint of cost we are for achieving maximum efficiency by change and reduction of planning process adapted to the special work group. At first we briefly will mention the kind, the necessity, and the concept of preventive maintenance, and then divide the equipment used in the assembly line into the two whether it is necessary or not by way of estimating the breakdown loss, comparing with general establishment of preventive maintenance and modifying it to the case. At the second step we will establish the operation system of plan management related to production and quality in the special case. Check period and category will be set by dividing the assembly equipment into LCL and Focus in the third step. The forth step will contain the operation procedure in detail. And then we must make check and repair record periodically. Finally, on the basis of the record the selection of checking of significance will be conducted. This results in safety improvement, tact time reduction, and productivity improvement.

• 국제학술발표논문집
• /
• The 2th International Conference on Construction Engineering and Project Management
• /
• pp.837-847
• /
• 2007

The study focused on the evaluation of maintenance management strategies used in public hospital buildings in Lagos state. It also assessed the labour composition for maintenance operations. In achieving these objectives, opinions of maintenance officers of ten (10) different hospitals in different local government areas of the state were sampled through well structured questionnaires. The data collected were analyzed using descriptive and inferential statistics. From the analysis, the study revealed that majority of those public hospitals do not have specific budget for maintenance programmes, maintenance policies, maintenance log book and maintenance manual to guide the operatives. About 98% of them do not understand the type of maintenance strategy being used for their maintenance operations. 78% of the maintenance work are only executed when there is a breakdown or in response to user's request. For labour composition, the cleaning of interior and exterior of the building, inspection of building elements, repairs and replacements of building elements are mainly carried out by in-house staff, while the repair and replacement of equipment is by outsourcing. The study also revealed that using in- house staff, reduces costs and provides a higher security while outsourcing provides more flexibility in staffing reduces equipment expenditures and provide better access to special skills. The study recommended proactive measures to provide necessary training and support for maintenance staff and users of these facilities and a means of securing sufficient funds for maintenance programmes.

• 산업경영시스템학회지
• /
• 제45권1호
• /
• pp.83-90
• /
• 2022

This study deals with replacement analysis of deteriorated equipment for improving productivity of production system. Frequent breakdown of the deteriorated equipment causes a situation that reduces productivity such as low product quality, process delay, and repair cost. However, the replacement of new equipment will be required a high initial investment cost, so it is important to analysis the economic feasibility. Therefore, we analyze the effect of the production system due to the aging effect of the equipment and the feasibility of equipment replacement based on the economic analysis. The process flow, working time, logistics movement, etc. are analyzed in order to build the simulation modeling for a ship and land switchboard production system. Using numerical examples, the economic feasibility analysis of equipment replacement through replacement of existing deteriorated equipment and additional arrangement of new facilities is performed.