• Journal of Plant Biology
• /
• v.38 no.3
• /
• pp.227-234
• /
• 1995

Exogenous putrescine of 0.5 mM or higher concentratons applied during a 16 h inductive dark period could elevate putrescine content in cotyledons of Pharbitis nil Choisy cv. Violet, a short-day plant, resulting in complete blocking of photoperiodic floral induction. Titers of putrescine, spermidine and spermine in the cotyledons were traced throughout a 16 h dark period. While non-induced cotyledons under continous light slightly increased levels of polyamines, induced tissue maintaiend its putrescine, spermidine and spermine levels as low as 66.4%, 60.9% and 84.9% of non-induced levels respecitvely. Endogenous polyamines kept at lower levels in the inductive dark period were found to upsurge by a night break treatment of 10 min light in the middle of the dark and consequently the inductive dark effect was canceled. Elevation of polyamine titers could also be induced by 100 $\mu$L/L ethylene treatment which completely suppressed floral induction. Compared to untreated cotyledons, ehtylene-treated tissues increased putrescine content by as much as 136.5% in 12 h and spermidine level by up to 130.1% in 8 h. Ethylene-treated cotyledons not only increased endogenous polyamine content but also liberate ethylene in the second half of the inductive dark period accumulating up to three to fourfold level supporting a hypothesis that ethylene-treated tissues are stimulated to produce ethylene which in turn accelerates polyamine biosynthesis in the tissues. It is postulated that substantially low polyamine titers in the inductive dark period would be one of the necessary factors controlling photoperiodic induction of flowering in Pharbitis nil and the inhibitory effects of night break and exogenous ethylene treatment may be atributed to their action to stimulate endogenous polyamine production.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.12
• /
• pp.1691-1701
• /
• 1998

Fly ash produced in coal combustion is a fine-grained material consisting mostly of spherical, glassy, and porous particles. A study on the formation mechanism of the fly ash from coal particles in the pulverized coal power plant is investigated with a physical, morphological, and chemical characteristic analysis of fly ash collected from the Samchonpo power plant. This study may contribute to the data base of domestic fly ash, the improvement of combustion efficiency, fouling phenomena and ash collection in the electrostatic precipitator. The physical property of fly ash is determined using a particle counter for the measurement of ash size distribution. Morphological characteristic of fly ash is performed using a scanning electron micrograph. The chemical components of fly ash are determined using an inductively coupled plasma emission spectrometry(ICP). The distribution of fly ash size was bi-modal and ranged from 12 to $19{\mu}m$ in mass median diameter. Exposure conditions of flue gas temperature and duration within the combustion zone of the boiler played an important role on the morphological properties of the fly ash such as shape, particle size and chemical components. The evolution of ash formation during pulverized coal combustion has revealed three major mechanisms by large particle formation due to break-up process, gas to particle conversion and growth by coagulation and agglomeration.

• Journal of ILASS-Korea
• /
• v.23 no.1
• /
• pp.30-35
• /
• 2018

The objective of this study is to predict numerically the effect of intake humidification on the injected diesel fuel spray characteristics in a compression ignition engine. In this work, Wave model and Ducowicz model were applied as the break-up model and evaporation model, respectively. The amount of water vapor for the humidification was changed from 0% to 30% of injected fuel mass. The number of applied meshes was generated from 49,000 to 110,000. At the same time, the results of this work were compared in terms of spray tip penetration, SMD and equivalence ratio distributions. It was found that the cylinder temperature and cylinder pressure were decreased with increasing water vapor mass by vaporization latent heat and specific heat, however, the difference was very small. So, the spray tip penetration was not different by water vapor mass. Also, higher equivalence ratio distributions were observed with increasing water vapor mass by the improvement of fuel atomization.

• Nuclear Engineering and Technology
• /
• v.51 no.5
• /
• pp.1307-1313
• /
• 2019

Recent analysis results with realistic assumptions provide the variability of operator allowable time for the initiation of aggressive cooldown under small break loss of coolant accident or steam generator tube rupture with total failure of high pressure safety injection. We investigated how plant risk may vary depending on the variability of operators' failure probability of timely initiation of aggressive cooldown. Using a probabilistic safety assessment model of a nuclear power plant, we showed that plant risks had a linear relation with the failure probability of aggressive cooldown and could be reduced by up to 10% as aggressive cooldown is more reliably performed. For individual accident management, we found that core damage potential could be gradually reduced by up to 40.49% and 63.84% after a small break loss of coolant accident or a steam generator tube rupture, respectively. Based on the importance of timely initiation of aggressive cooldown by main control room operators within the success criteria, implications for improvement of emergency operating procedures are discussed. We recommend conducting further detailed analyses of aggressive cooldown, commensurate with its importance in reducing risks in nuclear power plants.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.915-916
• /
• 2007

There are many equipments for the Short Circuit Test, for example Short Circuit Generator, Induction Motor, Sequence Timer, Exciter, CLR, Back Up Breaker, Making Switch and TRV etc. Especially Back up Breaker and Making Switch are very important equipments to test the short circuit test. A role of a Back up Breaker is to break high-voltage and high-current for short circuit test and a Making Switch should be operated always same speed/time and kept electrical-mechanical characteristics to make the voltage and current of short circuit test. This study introduces to the short circuit test also to kinds, principal movements and compare them of Back up Breaker and Making Switch.

• Journal of the Korean Society of Visualization
• /
• v.21 no.2
• /
• pp.45-54
• /
• 2023

In the present study, we propose new type of a spinning disk reactor(SDR) with high performance and very convenient structure to make a large scale equipment from lab-scale than the conventional one. A split-disk experimental equipment, based on new type of spinning disk reactor, has been developed to generate an energy to break a bulk of injected gas into smaller gas bubble. Several cases of an experimental observation make it to confirm that a bulk of injecting gas could be continuously break into smaller bubbles. It shows the feasibility to make a scale-up of SDR by using the characteristic of Taylor-Proudman column in rotating flow. A theoretical study on single phase liquid flow is given to predict a liquid induced shear stress, which make the present study to be self-containment.

• Journal of Technologic Dentistry
• /
• v.34 no.2
• /
• pp.95-103
• /
• 2012

Purpose: Fracture strength of all-ceramic 3-unit fixed partial dentures manufactured by CAD/CAM and copy-milling systems were evaluated. Methods: Zirconia cores were made by milling the pre-sintered zirconia block by CAD/CAM or copy milling method followed by subsequent sintering. By building-up the corresponding porcelains on the core, all-ceramic bridges were fabricated, and those were evaluated in comparison with PFM fixed partial denture. Results: During the flexural test of the 3-unit PFM bridge, the porcelain started to chip or break at 507.28(${\pm}62.82$)kgf and the metal framework did not break until the maximum load level of 800kgf which was set in the testing instrument of this study. However, among all-ceramic restoration test groups, Everest(EV) group showed a peeling off or breakage of the porcelain from 365.64(${\pm}64.96$)kgf and the core was broken at 491.77(${\pm}55.62$)kgf. Those values of Zirkonzahn(ZR) were 431.03(${\pm}58.47$)kgf and 602.74(${\pm}48.44$)kgf, respectively. The break strength of the porcelain of PFM(PM) group was significantly higher than that of EV (p<0.05) group and there was no significant difference when comparing to that of ZR (p>0.05). ZR group showed higher break strength than that of EV group however there was no significant difference (p>0.05). The break strength of cores were in the increasing order of EV < ZR < PM (p<0.05). Conclusion: We could find that even though the PM group fractured at much higher value than all-ceramic cores, the breakage values of the porcelain of PM group with crack formation or delamination, which will be regarded as clinical failure, was significantly higher than that of EV group and not significantly higher than that of ZR group at p-values of 0.05. The break strength of ZR group was higher than that of EV group at an insignificant level(p>0.05).

• Journal of East Asia Management
• /
• v.3 no.2
• /
• pp.43-64
• /
• 2022

Exploring innovations for latecomers to catch up has been a popular concern in industry and academia. Over the last decade, more and more East Asian latecomer firms have moved beyond imitation and are delivering innovative products and services to the market. However, the semiconductor latecomers from China have limited success in catching up with more mature semiconductor firms. Our study examines how semiconductor latecomers to break through the latecomer's dilemma by innovation and achieve catch-up. We use a single-case approach for the Semiconductor Manufacturing International Corporation (SMIC) vertical development process to analysis its innovation path of catching up. The study's results showed that SMIC relied on the government's policy and funding support, and based on the strategic endurance of entrepreneurs, it persisted in technology R&D investment and independent innovation for 20 years. SMIC finally smashed the dilemma of latecomers and successfully achieved catch-up. With these findings, we believe that the path of catching up innovation for semiconductor latecomers should be equipped with independent innovation of technology, strategic leadership of entrepreneurs and support of government policies. As these factors are combined, latecomer firms' position is expected to rise and catch-up will become visible. Our study contributes to some enlightenment on the innovation path for latecomers in China and global semiconductors to achieve their catch-up.

• Journal of Digital Convergence
• /
• v.17 no.8
• /
• pp.447-452
• /
• 2019

Modern people are investing a lot of time and economically in their appearance as a means of expressing their aesthetic desires. They have a lot of hair dyes that make up most of their appearance, but their hair damage is serious. Especially, they use hair dyes which are very popular among the hair cosmetics that make up most of their appearance, but their hair damage is serious. The purpose of this study is to investigate the hair tensile strength of hair with oxidative hair dye to induce styling while minimizing hair damage. The results showed that the Max. load, Max. stress, Max. elongation, break load, break stress, break elongation, maximum modulus and tangential modulus according to evaluation interval were significantly different between control and 8N-10N experimental groups. The maximum modulus and tangential modulus for the strain interval did not show tendency to increase or decrease constantly, although there was a difference between the control and experimental group. Therefore this study was conducted to investigate the correlation between hair loss and hair damage through the treatment of high grade oxidative hair dye, which is widely used in ield of industry. We want to provide application data.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.5
• /
• pp.597-603
• /
• 1997

Orostachys japonicus, Wasong as herb medicine, has been artificially cultivated as an anti-tumor medicinal. The experiment was carried out to examine the effect of natural daylength as control or night-break treatment (NB) imposed at June 20, July 18 or Aug. 15 on its growth, dry weights of leaf and bract, stem, floret and root, and morphological characters including bolting and floret flowering. After a plant was grown in a 15cm plastic pot containing a 2 : 1 soil : peat moss mixture on May 23, three treatments with above differing night-break had been imposed around midnight up to Nov. 7. The plants were sampled 3 times at the same day forced to night-break and then done 6 times by 2-week interval after the final NB. Plant height and inflorescence length of all the NB increased with delayed NB but declined in comparison with the natural daylength. No. of leaves including bracts showed similar response to plant height although NB given before July 18 showed less leaves and bracts. Stem diameters of NB were continuously increased to middle Sept. to middle Oct. while that of natural daylength decreased after middle Oct. Natural daylength or NB given on Aug. 15 had greater fraction, shoot and total dry weights resulting from increment of leaf and bract up to Aug. or of floret, stem and root after Sept. The earlier NB, the later formation of florets and the less number of flowering florets whereas in natural daylength florets on inflorescence begun to be formed from middle Sept. were sharply increased up to middle Oct. when all the plants were flowered. Bolting was not formed in the plant of the earliest NB of June 20, and thereby no anthesis of florets up to early Nov. It was concluded that year-round cultivation of Orostachys japonicus plants was possible through controlling the NB timing because its bolting and flowering of florets separately occurred.