Journal of the Korean Society of Visualization (한국가시화정보학회지)

The Korean Society of Visualization (한국가시화정보학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Gas-Liquid Reaction Intensification by Using Rotating Flow

회전유동을 이용한 기체-액체 반응 촉진 기술 연구

  • Received : 2023.06.22
  • Accepted : 2023.07.19
  • Published : 2023.07.31
Download PDF
⟨ Previous Next ⟩

Abstract

In the present study, we propose new type of a spinning disk reactor(SDR) with high performance and very convenient structure to make a large scale equipment from lab-scale than the conventional one. A split-disk experimental equipment, based on new type of spinning disk reactor, has been developed to generate an energy to break a bulk of injected gas into smaller gas bubble. Several cases of an experimental observation make it to confirm that a bulk of injecting gas could be continuously break into smaller bubbles. It shows the feasibility to make a scale-up of SDR by using the characteristic of Taylor-Proudman column in rotating flow. A theoretical study on single phase liquid flow is given to predict a liquid induced shear stress, which make the present study to be self-containment.

Keywords

References

  1. Stankiewicz, A.I. and Moulijn, J.A., 2000, "Process Intensification: Transforming Chemical Engineering", Chemical engineering progress, pp.22~34.
  2. K. Boodhoo and A. Harvey, 2013, "Process Intensification: An Overview of Principles and Practice," Process Intensification for Green Chemistry: Engineering Solutions for Sustainable Chemical Processing, Harvey. pp.1~31.
  3. R.J.J. Jachuck and C. Ramshaw, 1994, "Process Intensification-heat Transfer Characteristics of Tailored Rotating Surfaces, Heat Recovery Syst". CHP Vol.14 (5), pp.475~491. https://doi.org/10.1016/0890-4332(94)90051-5
  4. A. Auone and C. Ramshaw, 1999, "Process Intensification: Heat and Mass Transfer Characteristics of Liquid Films on Rotating Discs", Int. J. Heat Mass Transfer, Vol.42, pp.2543~2556. https://doi.org/10.1016/S0017-9310(98)00336-6
  5. J.S. Park, 2017, "An Ecperimental Study on Small-bubble Generation by Using Stewartson Layer in Rotating Flow", KSFM J. Fluid Machinery, Vol.20 (5), pp.46~53. https://doi.org/10.5293/kfma.2017.20.5.046
  6. J.S. Park, 2022, "On the Near Wall Coating Flow in a Sloshing Flow of Highly-Viscous Fluid in a Rectangular Box", J.KSV, Vol.20 (3), pp.27~35.
  7. N.M. Fischer, P. Tobler, M. Dressler, P. Fischer and E.J. Windhab, 2008, "Single Bubble Deformation and Breakup in Simple Shear Flow", Experiments in Fluids, Vol.45, pp.917~926. https://doi.org/10.1007/s00348-008-0509-1
  8. H.P. Greenspan, 1980, The Theory of Rotating fFuids, Cambridge Univ. Press.
  9. J.S. Park and J.M. Hyun, 1997, "Transient Stewartson Layers of a Rotating Compressible Fluid", Fluid Dyn. Research, Vol.19, pp.303~325. https://doi.org/10.1016/S0169-5983(96)00051-2
  10. J.S. Park and J,M, Hyun, 2002, "Transient Motion of a Confined Stratified Fluid Induced Simultaneously by Sidewall Thermal Loading and Vertical Throughflow", J. Fluid Mech., Vol.451, pp.295~317. https://doi.org/10.1017/S002211200100653X
  11. J.S. Park and J.G. Sohn, 2011, "Flow Analysis in a Rotating Container with Axial Injection and Radial Ejection", J.KSV, Vol.9 (1), pp.49~54. https://doi.org/10.5407/JKSV.2011.9.1.049