• Radiation Oncology Journal
• /
• v.36 no.1
• /
• pp.54-62
• /
• 2018

Purpose: To investigate set-up errors, suggest the adequate planning target volume (PTV) margin and image-guided radiotherapy frequency in head and neck (H&N) cancer treated with intensity-modulated radiotherapy (IMRT) assessed by kV cone-beam computed tomography (CBCT). Methods: We analyzed 360 CBCTs in 60 patients with H&N cancer treated with IMRT. The target delineation was contoured according to ICRU62. PTVs were generated by adding a 3-5 mm margin in all directions to the respective clinical target volumes. The kV CBCT images were obtained at first three days of irradiation and weekly thereafter. The overall mean displacement, range, systematic (${\Sigma}$) and random (${\sigma}$) errors were calculated. Adequate PTV margins were calculated according to the van Herk formula ($2.5{\Sigma}+0.7r$). Results: The mean of set-up errors was less than 2 mm in any direction. The overall frequency of set-up displacements greater than 3 mm was 3.9% in medial-lateral (ML) direction, 8% in superior-inferior (SI) direction, and 15.5% in anterior-posterior (AP) direction. The range of translations shifts was 0-9 mm in ML direction, 0-5 mm in SI direction and 0-10 mm in AP direction, respectively. After systematic set-up errors correction, the adequate margin to overcome the problem of set-up errors was found to be less than 3 mm. Conclusion: Image-guided kV CBCT was effective for the evaluation of set-up accuracy in H&N cancer. The kV CBCT at first three fractions and followed-by weekly appears adequate for reducing significantly set-up errors in H&N cancer treated with IMRT technique. Finally, 3-5 mm PTV margins appear adequate and safe to overcome the problem of set-up errors.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.12
• /
• pp.37-42
• /
• 1999

In this paper, some of main processes for the next generation integrated circuits, such as Cu damascene process using CMP, electron beam lithography, $SiO_2$ CVD and RIE, Ti/Cu-CVD were carried cut and then, two level Cu interconnects were accomplished. In the results of CMP unit processes, a 4,635 ${\AA}$/min of removal rate, a selectivity of Cu : $SiO_2$ of 150:1, a uniformity of 4.0% are obtained under process conditions of a head pressure of 4 PSI, table and head speed of 25rpm, a oscillation distance of 40 mm, and a slurry flow rate of 40 ml/min. Also 0.18 ${\mu}m\;SiO_2$ via-line patterns are fabricated using 1000 ${\mu}C/cm^2$ dose, 6 minute and 30 second development time and 1 minute and 30 second etching time. And finally sub-0.2 ${\mu}$ twolevel metal interconnects using the developed processes were fabricated and the problems of multilevel interconnects are discussed.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.10
• /
• pp.4147-4152
• /
• 2014

Standard therapy for advanced head and neck cancer consists of a combination of surgery and radiation. However, survival of this patient population has not improved during the past 20 years. Many different multimodality treatment schedules have been proposed, and chemotherapy is often used with the intent of organ preservation. The present study was intended to establish the efficacy of concomitant chemoradiation with a single agent carboplatin in advanced head and neck cancers.The objectives were to investigate the feasibility of concomitant administration of carboplatin, monitor acute toxicity during radiotherapy, and determine subacute side effects, such as wound healing following surgery after chemoradiotherapy. A prospective study was conducted wherein a total of 40 patients with stage III and IV squamous cell carcinomas of oral cavity, oropharynx, hypopharynx and larynx were enrolled. All patients were treated with external beam radiotherapy and weekly carboplatin area under curve (AUC of 5). Radiotherapy was given in single daily fractions of 1.8-2 grays (Gy) to a total dose of 66-72 Gy. Salvage surgery was performed for any residual or recurrent locoregional disease. Neck dissection was recommended for all patients with neck disease showing less than a complete response after chemoradiation. A total of 40 patients were enrolled of whom 32 were males and 8 were females. Highest incidence of cancer was seen in the 5th-6th decades of life with a median age of 47.7 years. Oropharyngeal tumours constituted a maximum of 21 patients followed by hypopharynx in 10, larynx in 7 and oral cavity in 2. 80% of the patients had a neck node on presentation of which 40% had N2-N3 nodal status. TNM staging revealed that 58% of patients were in stage III and 43% in stage IV. Evaluation of acute toxicity revealed that 50% had grade II mucositis, 25% grade III mucositis, 2.5% grade IV mucositis. 50% of patients had grade I skin reactions, 65% of patients had grade I thrombocytopenia, and 24% of patients had grade I anaemia. After completion of treatment 65% of patients had complete response at the primary and regional sites, and 35% of patients had a partial response of whom 23% underwent neck dissection and 5% of them underwent salvage surgery at the primary site. At the end of one year there were six deaths and four recurrences and 70% were free of disease. Concurrent chemoradiation with carboplatin provided good locoregional control for locally advanced head and neck cancers. This regimen, although toxic, is tolerable with appropriate supportive intervention. Primary site conservation is possible in many patients. Chemoradiotherapy appears to have an emerging role in the primary management of head and neck cancers.

• Journal of architectural history
• /
• v.18 no.1
• /
• pp.7-29
• /
• 2009

In understranding the essence of the Korea traditional Architecture, it is important to consider the jointing methods of architectural members, architectural technologies, etc. Especially the purpose of this study is understanding on the Jointing Method of Wooden Members in the period of Unified Silla Architecture. It's conclusion is summarized as follows. 1. A section of column has very close to do with the foundation stone. The structures of foundation stone and column are generally concluded by butt joint, arrow-head joint, housed joint by Grang-e method. Judu is structured by arrow-head joint And, in general, beam is structured by Sagaematchum Chumcha and sagaljudu of Don direction. At the head of Pyungju and the body of Goju, Changbang is structed by Jangbumachum with arrow-head joint or by jumukchang-machum. Also, it is surmised that Gyisoseum and Anssolim methods had been applied to columns from former ages. The example can be found at Bagjae Mireuksaji stone pagoda. Bagjae Mireuksaji stone pagoda taking wooden-pagoda form adopts Gyisoseum and Anssolim methods. We can also find such a sort of methods from other stone constructions like Budo, etc. 2. Injahwaban is structured by short Changbumachum with arrowed-head joint at upper members, and by Anjangmachum at the lower part. This sort of Gongpo style can be seen in the mural painting of tomb of Koguryo and in Buplyungsa, Buplyunsa, Bupkisa-located in Japan, which are influenced by Bakjae or Unified Silla. It is considered that at the end of the late United Silla, Injawhaban had been replaced with Chumcha and Soro on the Pyungbang under influence of Dapo style from China.

• Korean Journal of Bronchoesophagology
• /
• v.3 no.2
• /
• pp.287-292
• /
• 1997

We report 22 cases of well -differentiated thyroid carcinoma infiltrating the upper airway tract. This retrospective study was undertaken to evaluate the prognosis md to determine optimal therapy for thyroid carcinoma adhering to or invading the trachea or larynx from 1984.3 to 1996.12. The treatment was individualized depending on the extent of the cancer. There were 12 cases dissected free by an laryngotracheal shaving, 7 cases removed by an tracheal resection with end to end anastomosis, 3 cases removed by an total laryngectomy. In all of these cases, we performed a total thyroidectomy with an accompanying neck dissection. There were no major complications during the operation. Over the 5-years observation period, 11 patients are alive without a sign of recurrence, 4 Patients are alive with recurrence, 7 died of thyroid carcinoma; 2 of 12 in an laryngotracheal shaving cases, 2 of 7 in an tracheal resection with end to end anastomosis case, 3 of 3 in an total laryngectomy case. The result showed an radical operation for thyroid carcinoma invading the laryngotrachea improves the survival rate, but limits improving the cure rate, and the invasion of the thrchea or larynx must be treated whenever possible by an total resection followed by radioiodine and external beam radiation.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.2
• /
• pp.220-227
• /
• 1998

In substitution of beam-nonlinear spring model for real-car, it may have errors due to complicated characteristics of joint and overestimation of joints stiffness. In this research, a method for the joint modeling was suggested by nonlinear static and dynamic analyses of beam and shell joint models and verified by the application of accomplished joint modeling method to simplified full car model. In consequence, modified simplified full car model was improved in local acceleration and rigid wall force. Finally, the frontal crash analyses with the dummy were established and the accelerations of accelerations of head, chest and pelvis had good agreements with those of shell model.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.6
• /
• pp.696-702
• /
• 2012

In this study, a noncontact laser ultrasonic system is proposed for rail defect detection. An Nd-Yag pulse laser is used for generation of ultrasonic waves, and the corresponding ultrasonic responses are measured by a laser Doppler vibrometer. For the detection of rail surface damages, the shape of the excitation laser beam is transformed into a line. On the other hand, a point source laser beam is used for the inspection of defects inside a rail head. Then, the interactions of propagating ultrasonic waves with defects are examined using actual rail specimens. Amplitude attenuation was mainly observed for a surface crack, and reflections were most noticeable from an internal damage. Finally, opportunities and challenges associated with real-time rail inspection from a high-speed train are discussed.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.17-20
• /
• 2000

We have enhanced the yield of 0.25 ${\mu}{\textrm}{m}$ T-gate $Al_{0.25}$G $a_{0.75}$As/I $n_{0.2}$G $a_{0.8}$As P-HEMT using three-layer E-beam lithography process and selective etching process. The three-layer resist structure (PMMA/copolymer/ PMMA=2000 $\AA$/3000 $\AA$/2000 $\AA$) and three developers (Benzene：IPA=1：1,Methanol：IPA =1：1,MIBK：IPA=1：3) were used for fabrication of a wide-head T-gate by the conventional double E-beam exposure technology. Also 1 wt% citric acid： $H_2O$$_2$：N $H_{4}$OH(200m1：4ml：2.2ml) solution were used for uniform gate recess. The etching selectivity of GaAs over $Al_{0.25}$G $a_{0.75}$As is measured to be 80. So these P-HEMT processes can be used in X-band MMIC LNA fabrication.ion.ion.ion.

• Proceedings of the KWS Conference
• /
• 2006.05a
• /
• pp.248-250
• /
• 2006

The study on a surface transformation hardening of a rod-shaped SM45C carbon steel is carried out by using CW Nd:YAG laser. Conventionally, $CO_2$ laser has been usually used as a laser source for a transformation hardening. however, it is needed to an additional absorbent coating like a colloidal graphite owing to a lower absorbtion rate. On the other hand, no cost and post-removal process of coating is required to Nd:YAG laser, due to a higher absorbtion rate relatively. Moreover, there is a merit which is capable of building up the more flexible processing system resulted from a beam delivery through a optical fiber. In this study, we were going to recognize characteristics of a transformation hardening using a optic head with a gaussian beam distribution.

• The korean journal of orthodontics
• /
• v.45 no.2
• /
• pp.66-73
• /
• 2015

Objective: To compare condylar position and morphology among different vertical skeletal patterns. Methods: Diagnostic cone-beam computed tomography images of 60 adult patients (120 temporomandibular joints) who visited the orthodontic clinic of Hallym University Sacred Heart Hospital were reviewed. The subjects were divided into three equal groups according to the mandibular plane angle: hypodivergent, normodivergent, and hyperdivergent groups. Morphology of the condyle and mandibular fossa and condylar position were compared among the groups. Results: The hypodivergent and hyperdivergent groups showed significant differences in superior joint spaces, antero-posterior condyle width, medio-lateral condyle width, condyle head angle, and condylar shapes. Conclusions: Condylar position and morphology vary according to vertical facial morphology. This relationship should be considered for predicting and establishing a proper treatment plan for temporomandibular diseases during orthodontic treatment.