• Proceedings of the KIEE Conference
• /
• 2008.04c
• /
• pp.163-165
• /
• 2008

A S/W testing for vital railway signaling system have been important because of the increase of software usage for signaling. And also the safety of vital signaling system is required by int'l std. such as IEC 61508. While much efforts have been reported to improve electronic hardware's safety, not so much systematic approaches to assessment software's safety. In this paper, we propose a automation schemen of software testing tool for railway signaling system. From that, we show the functional architecture and internal components of the tool.

• International Journal of Precision Engineering and Manufacturing
• /
• v.1 no.1
• /
• pp.118-126
• /
• 2000

Die-casting burr to casting process is removed by post-process for assembly and quality control of product. Though robot has been widely used for deburring job before. CNC exclusive machine is currently developed for high power, high speed machining and quick tool change. Deburring tool path with complex 3D curve type is defined to make out deburring NC program. But there is no efficient method to define it currently used methods with teaching probe on machine. In this study the efficient method to make out deburring NC program is developed. 5-axis digitizing machine is used to receive data of deburring path. And the post process for NC program generation is developed in consideration of the machining conditions. The developed system is not dependent on the skill of operator and has the advantage to maintain the flexibility of job to modify NC program due to the wear of tool and aging of the die casting.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.485-491
• /
• 1999

A burr is formed in every corner of parts as a result of machining, which produces undesirable edge geometry and influence deeply to surface quality of workpiece. Therefore these burrs must be removed certainly. The cost of removing these burrs is directly proportional to their size. Burrs have been among the most troublesome obstruction to high productivity and automation of machining processes. The proper selection of cutting condition and tool geometry will be helpful to reduce the occurrence of burrs. In paper will observe burr formation along helix angle in end milling and certificate experimentally mechanics relation of helix angle and burr formation.

• Journal of Korean Institute of Industrial Engineers
• /
• v.14 no.2
• /
• pp.71-80
• /
• 1988

The primary purpose of this study is to develop an automation tool capable of converting the specification of structured analysis into that of structured design. Structured Analysis and Structured Design Language (SASDL) is a computer-aided description language based on ERA model and particulariged by ISLDM/SEM. The automation tool utilizes the specifications of data flow diagram described in SASDL to produce their corresponding SASDL specification of structure chart. The main idea behind the automatic conversion process is to categorize the bubbles in data flow diagram and to determine the positions of the bubbles in structure chart according to their categories and the relative locations in data flow diagram. To make the problem into manageable size, the whole system is broken down into separate parts called activity units. A great deal of manual jobs, such as checking processes leveling, checking data derivation of processes, deriving structure chart from data flow diagram, checking any inconsistency between data flow diagram and structure chart and so forth, can be automated by using SASDL and conversion tool. The specification of structure chart derived by conversion tool may be used in an initial step of design to be refined by SASDL users.

• Structural Engineering and Mechanics
• /
• v.49 no.5
• /
• pp.645-660
• /
• 2014

This paper presents the design and project of an innovative concept for a Single Point Incremental Forming (SPIF) Machine. Nowadays, equipment currently available for conducting SPIF result mostly from the adaptation of conventional CNC machine tools that results in a limited range of applications in terms of materials and geometries. There is also a limited market supply of equipment dedicated to Incremental Sheet Forming (ISF), that are costly considering low batches, making it unattractive for industry. Other factors impairing a quicker spread of SPIF are large forming times and poor geometrical accuracy of parts. The following sections will depict the development of a new equipment, designed to overcome some of the limitations of machines currently used, allowing the development of a sounding basis for further studies on the particular features of this process. The equipment here described possesses six-degrees-of freedom for the tool, for the sake of improved flexibility in terms of achievable tool-paths and an extra stiffness provided by a parallel kinematics scheme. A brief state of the art about the existing SPIF machines is provided to support the project's guidelines.

• 연구논문집
• /
• s.25
• /
• pp.121-128
• /
• 1995

The early day of manufacturing automation systems are NC machine tool Based automation, and now it become FA, DNC, FMC, FMS, CIM and IMS. Manufacturing Automation Technology is applied the increase of all industrial manufacturing competitve power. so the demand of this skill is repidly increase. This Technology can solve lack of manpower, decrease of productivity, and become weakened international competitive. But, automation rate of our country is 30-40%, because the level of domestic technology is low, so we need systemic research of manufacturing automation. The targets of this study are increase the data processing ability of CNC controller, and development of autonomous manufacturing system that can decision making between production module such as setup, manufacturing, inspection and transportation and part that object of manufacturing.

• Proceedings of the ESK Conference
• /
• 1993.10a
• /
• pp.252-262
• /
• 1993

The subject on office automation is gradually gaining more improtance due to the fact that the efficiency of office systems contribute to the increase of productivity as much as manufactoring systems themselves. For successful implementation of office automation, one must carefully plan and execute various steps such as the analysis of office tasks, personnel training, workplace design, equipment design, and so on. The previous studies related to the subject has not been concrete enough to be practically helpful for the actual realization of office automation. In this paper, a new analysis method of the office task is proposed. This analysis method is based on the Rasmussen's and Bennette's methods. The Rasmussen's method describes a way of quantifying mental workload while the Bennette's method provides a tool for the analysis of the office task. The posner's and Rouse's methods are also employed for the detailed division of tasks. The method proposed in this paper is believed to be easier for use and expected to be more helpful for us to cope with the clear definition of office tasks that is vital to successful implementation of office automation.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.479-484
• /
• 2004

For the rational design of welded joint, it is needed to assess repeatedly the fatigue life of the joint with various dimensions and welding conditions. In this paper, an automation of repeated process of fatigue life assessment for welded cruciform joint was studied. The process is related to stress analysis in vicinity of weld-toe and fatigue life assessment based on analyzed stress distribution. With the change of design condition including dimensions and/or welding heat input, the above two works have to be performed. Using the commercial tool for system integration, ModelCenter, an automation of the repeated process for welded cruciform joint based on 2D modeling was achieved. In this automation system, data exchanges between programs regardless of commercial or in-house one work well, and parametric studies for optimal design can be performed.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.231-234
• /
• 2002

This thesis is to introduce development process and application for domestic production of Automation System for High Density and Perpendicular Storage used in the industrial field. Most of the traditional Automation Systems for High Density and Perpendicular Storage are imported and using in the industrial field. As a result of this condition, foreign competitive power is decreased cause increasing of production cost. In spite of economical burden to protect a loss with management in the case of the industrial field dealing with various products, imported Automation System for High Density and Perpendicular Storage is used. On this developed Automation System for High Density and Perpendicular Storage solved these problems. Developed system uses managing computer, it is easy to manipulate input and output of production and inventory management. Moreover, Developed system accomplished shortened driving time and mechanical safety.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.517-517
• /
• 2000

Welding automation is one of the most important manufacturing issues in shipbuilding in order to lower the cost, increase the quality, and avoid the labor problems. Generally the on-line teaching is utilized on the robot that is used in the welding automation system, but it requires much effort and long time to program. Especially, if the system is composed of more than two cooperating robots, it demands much more skill to program the robots' motion. Thus, a convenient programming tool is required for efficient utilization of welding automation system. In this study, a convenient programming tool is developed for welding automation in which gantry-robot system is used. The system is composed of a gantry transporter and two robots mounted on the gantry to cover the wide work range in the ship building application. As a programming tool, an off-line programming software based on PC is developed. By using this software, field operator does not need to concern about coding of task programs for three control units, one is for gantry and two are for robots. The task programs are automatically generated by assembling the program modules in database according to geometrical information of workpiece and welding condition, which become the only concern of field operator, The feasibility of the generated programs can be verified via a motion simulator previously to on-line running.