• Wind and Structures
• /
• 제31권5호
• /
• pp.403-418
• /
• 2020

To investigate the effects of central buckles on the dynamic behavior and flutter stability of long-span suspension bridges, four different connection options between the main cable and the girder near the mid-span position of the Aizhai Bridge were studied. Based on the flutter derivatives obtained from wind tunnel tests, formulations of self-excited forces in the time domain were obtained using a nonlinear least square fitting method and a time-domain flutter analysis was realized. Subsequently, the influences of the central buckles on the critical flutter velocity, flutter frequency, and three-dimensional flutter states of the bridge were investigated. The results show that the central buckles can significantly increase the frequency of the longitudinal floating mode of the bridge and have greater influence on the frequencies of the asymmetric lateral bending mode and asymmetric torsion mode than on that of the symmetric ones. As such, the central buckles have small impact on the critical flutter velocity due to that the flutter mode of the Aizhai Bridge was essentially the symmetric torsion mode coupled with the symmetric vertical mode. However, the central buckles have certain impact on the flutter mode and the three-dimensional flutter states of the bridge. In addition, it is found that the phenomenon of complex beat vibrations (called intermittent flutter phenomenon) appeared in the flutter state of the bridge when the structural damping is 0 or very low.

• 대한임베디드공학회논문지
• /
• 제18권1호
• /
• pp.31-40
• /
• 2023

Recent advances in flash technologies, such as 3D processing and multileveling schemes, have successfully increased the flash capacity. Unfortunately, these technology advances significantly degrade flash's reliability due to a smaller cell geometry and a finer-grained cell state control. In this paper, we propose an asymmetric BER-aware reliability optimization technique (aBARO), new flash optimization that improves the flash reliability. To this end, we first reveal that bit errors of 3D NAND flash memory are highly skewed among flash cell states. The proposed aBARO exploits the unique per-state error model in flash cell states by selecting the most error-prone flash states and by forming narrow threshold voltage distributions (for the selected states only). Furthermore, aBARO is applied only when the program time (tPROG) gets shorter when a flash cell becomes aging, thereby keeping the program latency of storage systems unchanged. Our experimental results with real 3D MLC and TLC flash devices show that aBARO can effectively improve flash reliability by mitigating a significant number of bit errors. In addition, aBARO can also reduce the read latency by 40%, on average, by suppressing the read retries.

• 디지털콘텐츠학회 논문지
• /
• 제12권2호
• /
• pp.141-150
• /
• 2011

최근 다양한 기기에서 플래시 메모리 저장장치인 SSD가 활용되고 있다. SSD 기반 시스템에서 기존 하드 디스크 기반 버퍼 교체 알고리즘은 플래시 메모리의 특성을 고려하지 않고 이는 시스템의 성능 저하의 원인이 된다. 본 논문에서는 SSD의 특성을 고려하여 읽기 버퍼와 쓰기 버퍼를 분리하고 각각의 버퍼에 서로 다른 크기의 교체 단위와 서로 교체 알고리즘을 적용하는 ABM (Asymmetric Buffer Management) 정책을 제안한다. 추가적으로 제안한 정책을 보완하기 위해 쓰기 교체 지연 정책, 동적 크기 적응화 알고리즘을 적용하였다. 제안한 ABM 정책은 효과적으로 성능을 향상시키는 것으로 나타났으며, 특히 여러 알고리즘 중 가장 성능이 좋은 ABM-LRU-CLC의 경우 기존의 LRU에 비해 최대 32% 성능이 향상되는 것으로 나타났다.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권12호
• /
• pp.1185-1194
• /
• 2020

This study aims to test Voluntary Disclosure, Quality of Financial Reporting and Information Asymmetry as Moderation Variables. The Voluntary Disclosure variable is calculated using the Index Disclosure. This research uses quantitative methods and uses partial least square with EViews data analysis. The research sample consisted of 225 manufacturing companies listed on the Indonesian stock exchange for the period 2016-2018. The results of the study state that voluntary disclosure has a positive and significant effect on the quality of financial reporting through asymmetric information. The relationship between voluntary disclosure and asymmetric information has a negative effect on the quality of financial reporting, states that the disclosure of voluntary reports to companies can prevent information asymmetry, as well as the relationship of voluntary disclosure to information asymmetry states that companies that make voluntary disclosure will increase the interest of investors and other stakeholders. The quality of financial reporting states that if there is information asymmetry, the quality of financial reporting will also decline. The low value of relevance will affect the level of large or small information gaps between management and investors. The quality of financial reporting with increased relevance means that asymmetric information will have a negative impact on financial reporting.

• Computers and Concrete
• /
• 제14권2호
• /
• pp.109-125
• /
• 2014

The force transfer mechanism in positive moment continuity details for prestressed concrete girder bridges is investigated in this paper using a three-dimensional detailed finite element model. Positive moment reinforcement in the form of hairpin bars as recommended by the National Cooperative Highway Research Program Report No 519 is incorporated in the model. The cold construction joint that develops at the interface between girder ends and continuity diaphragms is also simulated via contact elements. The model is then subjected to the positive moment and corresponding shear forces that would develop over the service life of the bridge. The stress distribution in the continuity diaphragm and the axial force distribution in the hairpin bars are presented. It was found that due to the asymmetric configuration of the hairpin bars, asymmetric stress distribution develops at the continuity diaphragm, which can be exacerbated by other asymmetric factors such as skewed bridge configurations. It was also observed that when the joint is subjected to a positive moment, the tensile force is transferred from the girder end to the continuity diaphragm only through the hairpin bars due to the lack of contact between the both members at the construction joint. As a result, the stress distribution at girder ends was found to be concentrated around the hairpin bars influence area, rather than be resisted by the entire girder composite section. Finally, the results are used to develop an approach for estimating the cracking moment capacity at girder ends based on a proposed effective moment of inertia.

• Fibers and Polymers
• /
• 제7권1호
• /
• pp.42-50
• /
• 2006

In this paper, elasto-plastic constitutive equations for highly anisotropic and asymmetric materials are developed and their numerical implementation is presented. Some engineering materials such as fiber reinforced composites show different material behavior in the different material directions (anisotropy) as well as in tension and compression (asymmetry). Although these materials have mostly been analyzed using the anisotropic elastic constitutive equations, the necessity of consideration of plastic properties has been frequently reported in the previous works. In order to include both the anisotropic and asymmetric properties of composite materials, the Drucker-Prager yield criterion is modified by adding anisotropic parameters and initial components of translation. The implementation procedure for the developed theory and algorithms is presented based on the implicit finite element scheme. The measured data from the previous work are used to validate the present constitutive equations.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권8호
• /
• pp.1955-1971
• /
• 2013

This paper studies relay selection and power allocation for amplify-and-forward (AF) based two-way relay networks (TWRN) with asymmetric traffic requirements (ATR). A joint relay selection and power allocation algorithm is proposed to decrease the outage probability of TWRN with ATR. In this algorithm, two sources exchange information with the help of the relay during two time slots. We first calculate the optimal power allocation parameters based on instantaneous channel state information (CSI), and then derive a tight lower bound of outage probability. Furthermore, we propose a simplified relay selection criterion, which can be easily calculated as harmonic mean of instantaneous channel gains, according to the outage probability expressions. Simulation results verified the theoretical analyses we presented. It is shown that the outage probability of our algorithm improves 3-4dB comparing with that of other existing algorithms, and the lower bound is tight comparing with actual value for the entire signal-to-noise ratio (SNR) region.

• Fibers and Polymers
• /
• 제7권3호
• /
• pp.276-285
• /
• 2006

Development and numerical implementation for an elastoplastic constitutive model for anisotropic and asymmetric materials are presented in this paper. The Coulomb-Mohr yield criterion was modified to consider both the anisotropic and asymmetric properties. The modified yield criterion is an isotropic function of the principal values of a symmetric matrix which is linearly transformed from the Cauchy stress space. In addition to the constitutive equation, the numerical treatment for the singularity in the vertex region of yield surface and stress integration algorithm based on elastoplasticity were presented. In order to assess the accuracy of numerical algorithm, isoerror maps were considered. Also, extension of a strip with a circular hole was simulated and results compared with those obtained using the (smooth) Mises yield criterion to validate stress output for a complex stress state.

• Transactions on Electrical and Electronic Materials
• /
• 제11권1호
• /
• pp.15-19
• /
• 2010

In this paper, we discuss design considerations for an n-channel metal-oxide-semiconductor field-effect transistor (MOSFET) with a lateral asymmetric channel (LAC) doping profile. We employed a $0.35\;{\mu}m$ standard complementary MOSFET process for fabrication of the devices. The gates to the LAC doping overlap lengths were 0.5, 1.0, and $1.5\;{\mu}m$. The drain current ($I_{ON}$), transconductance ($g_m$), substrate current ($i_{SUB}$), drain to source leakage current ($i_{OFF}$), and channel-hot-electron (CHE) reliability characteristics were taken into account for optimum device design. The LAC devices with shorter overlap lengths demonstrated improved $I_{ON}$ and $g_m$ characteristics. On the other hand, the LAC devices with longer overlap lengths demonstrated improved CHE degradation and $I_{OFF}$ characteristics.

• Journal of Contemporary Eastern Asia
• /
• 제20권2호
• /
• pp.210-236
• /
• 2021

China's Belt and Road Initiative infrastructure connectivity and other projects are presented in much of the discourse as a grand strategy to trap developing nations in debt, to exert asymmetric power and construct a new world economic order. The asymmetric relationship between China and Myanmar might therefore be expected to generate a range of political risks for stakeholders. Myanmar itself presents a "perfect storm" of problems, with dysfunctional governance, civil conflict, under-development and growing economic dependence on China. The Kyaukphyu port project and associated Special Economic Zone in Myanmar's troubled Rakhine state is investigated as a case study of risks on the Belt and Road. While worst case fears China might seize military control of the port appear unlikely, at least in current conditions, empirical observation indicates the complexity on the ground generates an array of other risks - as well as opportunities, should conditions allow. Further, despite challenges and constrained capacity, Myanmar governments have demonstrated agency, including by re-negotiating control and costs of the Kyaukphyu project. The case underlines that conditions are more complicated than simply China's asymmetric power. A sceptical approach is taken to normative discourses in order to build inductive understanding of how stakeholders and local experts perceive dynamics underway. A political risk approach is deployed to develop a framework to identify, analyse and assess risks for actors in relation to the Kyaukphyu project. The research findings are presented on an interim basis, given current constraints on field interviews due to the current crisis.