• Journal of Korean Association for Spatial Structures
• /
• v.21 no.1
• /
• pp.71-78
• /
• 2021

The U-flanged truss hybrid beam is a new composite beam made by pouring concrete into the U-flanged truss beam. In this study, an experimental study was performed to verify the shear capacity of U-flanged truss hybrid beams with the newly developed end reinforcement details. For all specimens, the maximum shear strength was determined by shear failure of concrete in the loading point The detail reinforced with stirrups at the end zone can exhibit the greatest shear strength, but the method of reinforcing the end zone using vertical steel plates, which is a relatively easy method to manufacture, is considered to be the most effective detail in terms of shear strength and ductility. Also, in the case of U-flanged truss hybrid beams reinforced with vertical steel plates at the end zone, the shear strength can be evaluated on the safety side by using the Korea Design Standard formula.

• Journal of architectural history
• /
• v.31 no.3
• /
• pp.7-16
• /
• 2022

Fen(分°) is the proportional dimension unit of the standard timber section on Yingzaofashi(營造法式), and there is a phrase that not only structural members but the whole structural design of a building also use Fen as the dimension unit on the book. But in fact only the section dimensions of structural members are recorded by Fen, but the design dimensions are recorded by Chi(尺) on the book. Other historical records also described the building size by Chi. So there has been long-standing debate on the phase in Chinese architectural history society, including the recent confrontation on the analysis of survey figures of the east great hall of Foguangsi temple(佛光寺 東大殿). This paper analyzes all the records about the size of structural members and section planning on the book to make various calculation and evaluation. And it makes a survey of Cai(材) as the dimension and design unit between Chi and Fen through geometric analysis. Cai might be a rough unit of measurement in terms of structural and proportional scheming on Yingzaofashi, and the full size Cai(足材) had been a building scheming module before the Song dynasty.

• Journal of architectural history
• /
• v.30 no.6
• /
• pp.33-44
• /
• 2021

The traditional Korean heating system ondol, one of the most important characteristics of Korean architecture, still remains as hydronic floor heating. Various studies have been conducted on the modernization of ondol, but the process of introducing the hydronic floor heating has not been seriously studied so far. Therefore, this paper aims to demonstrate how the hydronic floor heating had been introduced to Korea, taking the 1950s and 1960s Haengchon, Jongam, and Mapo Apartments for example - these three are regarded as the first Korean apartment houses after the Korean War. While Western advanced construction technology was imported for these apartments, various methods of modernizing ondol were also considered. What was remarkable in these attempts is that hydronic floor heating first appeared in Mapo 1st Apartment in 1962, because this is the universal heating method in the present Korea. This fact signifies that the traditional principle of floor heating has been maintained, and it would also be meaningful in terms of architectural exchanges between East and West, if considered along with Wright's application of the Korean heating principle to his houses since 1930s.

• Computers and Concrete
• /
• v.32 no.3
• /
• pp.339-349
• /
• 2023

Fast-built construction is a key feature for successful applications of precast concrete (PC) moment frame system in recent construction practices. To this end, by introducing some unique splicing details in precast connections, especially between PC columns including panel zones, use of temporary supports and bracings can be minimized based on their self-sustaining nature. In addition, precast wide beams are commonly adopted for better economic feasibility. In this study, three self-sustaining precast concrete (PC) wide beam-column connection specimens were fabricated and tested under reversed cyclic loadings, and their seismic performances were quantitatively evaluated in terms of strength, ductility, failure modes, energy dissipation and stiffness degradation. Test results were compared with ASCE 41-17 nonlinear modeling curves and its corresponding acceptance criteria. On this basis, an improved macro modeling method was explored for a more accurate simulation. It appeared that all the test specimens fully satisfy the acceptance criteria, but the implicit joint model recommended in ASCE 41-17 tends to underestimate the joint shear stiffness of PC wide beam-column connection. While, the explicit joint model along with concentrated plastic hinge modeling technique is able to present better accuracy in simulating the cyclic responses of PC wide beam-column connections.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.1
• /
• pp.81-92
• /
• 2023

According to the 2020 industrial accident reports of the Ministry of Employment and Labor, the number of fatal accidents in the construction industry over the past 5 years has been higher than in other industries. Of these more than 50% of fatal accidents are initially caused by fall accidents. The central government is intensively managing falling/jamming protection device and the use of personal protective equipment to eradicate the inappropriate factors disrupting safety at construction sites. In addition, although efforts have been made to prevent safety accidents with the proposal of the Special Act on Construction Safety, fatalities on construction sites are constantly occurring. Therefore, this study developed a model that automatically detects the wearing state of the worker's safety helmet and belt using computer vision technology. In considerations of conditions occurring at construction sites, we suggest an optimization method, which has been verified in terms of the accuracy and operation speed of the proposed model. As a result, it is possible to improve the efficiency of inspection and patrol by construction site managers, which is expected to contribute to reinforcing competency of safety management.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.3
• /
• pp.297-304
• /
• 2020

Design for Safety(DfS) at the design stage is introduced and executed in order to fundamentally reduce the occurrence of construction safety accidents in Korea. Therefore, in this study, the construction method selected by Design for Safety can reduce safety accidents, but the effects on construction duration and costs were examined to confirm the effectiveness of various aspects. The construction method of the structural frame for the exterior wall cladding of the building, which have the factors for the fall accident, was selected for construction safety and compared and analyzed in terms of construction duration and costs. As a result, it was found to be effective not only in terms of safety, but also in terms of construction duration and costs. Therefore, it is considered that the construction method selected by the Design for Safety at the design stage will have a positive effect on the entire construction project.

• Journal of architectural history
• /
• v.21 no.1
• /
• pp.171-186
• /
• 2012

The objective of this study is to find out the recent trends of hanok design based on 58 hanoks appeared in architecture magazines in the last 10 years. The cases are analyzed in terms of location, size, building form, spatial organization, material, roof form, and the ceiling form of living room. The consequences of this study is as follows; Most of the recent hanoks are built in rural area (91.4%), which shows the hanok is not accepted as an urban house type. Hanoks tend to be built in 2 stories whose 2nd floor is smaller than the 1st floor. (34.5%) The preferred size is total floor area of $99.2{\sim}165.2m^2$ (62.0%), 3 rooms (46.6%) with a traditional ondol room (60.3%). The buildings with ㄱ-shape (43.1%) and linear-shape (27.6%) are preferred, and the compact plan type similar with apartment house appears (13.8%). In the roof design that greatly influences the appearance of building, the traditional design factors such as half-hipped roof (55.2%), double eaves (27.6%), and eaves curve tend to be sustained. In terms of spatial organization, most of recent hanoks have double-layed plan (74.2%). The living room mostly has separately defined space. (82.8%) The indoor and outdoor tend to be connected by a narrow wooden veranda (39.7%), while some cases don't have any wooden floor space (48.3%). The entrance is adopted as an important spatial element in front part of building (75.9%), and it influences the appearance of building. The living room, the counterpart of the wooden floor hall in traditional hanok, and kitchen tend to be interiorized. In terms of material, the cement roof tile and red clay brick are preferred. Consequently, the walls of recent hanoks have the image of brick structure rather than the wooden frame structure of traditonal hanok.

• Journal of the Korean Society of Costume
• /
• v.58 no.2
• /
• pp.78-92
• /
• 2008

The mutual relationship between fashion and architecture and the similarities in their form and structure have been continuously debated over the decades, considering that both spheres are objects used in human life. Both spheres bring about the creation of three-dimensional space structures that are completed by the human body and material, based on a design targeted for people. The similarities between fashion and architecture in terms of form and structure have been debated by western architecture scholars focusing on the support that holds the garment's shape, the tailoring of a men's suit and also the material. The debate originates from the discussion of F. Th. Vischer, Kritische Gnge, and Gottfried Semper during the nineteenth century on the similarities between crinoline and the form of architecture and also the similarities between sewing and architecture. However, architects always regarded fashion as the inferior creative process that follows architecture in viewing the relationship between fashion and architecture. During the mid to end of the twentieth century, contrary to previous decades, the sense of fashion in architecture stood out, as an issue and a different approach was taken in discussing architecture that incorporates fashion. Accordingly, in the mid 1990's, architecture scholars such as Deborah Fausch and Mark Wigley began to conduct close observation of the mutual relationship between fashion and architecture from a more equal point of view. Notwithstanding, their point of view was still biased towards architectural standards. Commencing the Millennium, fashion has become the primary work of creation which leads style in all spheres, and under these circumstances this point of view has transferred from architecture to fashion when thinking about relationships between these spheres. The discussion on fashion and architecture form fashion's point of view is currently concentrated on the post 1990's phenomenon and illustrates the environment that is related to architecture. In general, the discussion is limited to determining a work of an individual designer as 'being architectural' when explaining the sculptural form of fashion. Therefore, this research aims to renew the discussion on twentieth century fashion design, which was neglected in any studies on observing architecture and fashion. The aim of this research is to classify the architectural paradigm of twentieth century fashion design and to observe the architectural forms of the respective eras. It is necessary to have a close observation of the architectural paradigm in twentieth century fashion design where support tools such as the crinoline was avoided and the form and functionality of the garment itself was emphasized. I will conduct this research by considering the architectural form shown in fashion as a practical three-dimensional creation that exists in space.

• Journal of the Korean Institute of Rural Architecture
• /
• v.24 no.3
• /
• pp.59-66
• /
• 2022

This study aims to find out how architectural designers applied the design process and what content is applied in the practical process of architectural design in Korea, and to improve it if there is a problem. So the study is carried out by investigating 13 architects(Including one person who wants to keep his work private) with extensive experience in architectural design. The architects were questioned on how and what content the design process was used for their representative works that had been designed. And interviews and field surveys were conducted on other matters to be improved. The survey was conducted from November 2021 to July 2022. According to the conclusion of this study, First, Most architects were applying the design process in the architectural design practice. These are caused by an impact on education, but there was also an aspect of preparation in terms of guidelines such as the Architects Association and storage rights. Second, Although the design process differed in each name and phase, it was generally carried out in the order of the start phase, the planning work phase, the basic design phase, the intermediate design phase, the implementation quarterly, and construction. Third, The step-by-step work of the design process differed slightly depending on the architect, but counseling and contract work were mainly performed at the start-up phase, and field surveys, legal investigations, and case studys were conducted at the planning phase. In the basic design phase, some contents related to architectural programming, basic drawings, images, and models were used as main work contents. In the intermediate design phase, secondary contents such as licensed books and facility facilities were the main tasks. In the implementation design phase, detailed maps and various frost facilities were finally inspected. Since then, construction and supervision have been carried out in the order of progress. Forth, As for the contents to be improved in the future, the architect's ability, the designer's knowledge of the overall architecture, the design supervision system, and the expansion of time for the initial design process were answered.

• Architectural research
• /
• v.13 no.4
• /
• pp.3-10
• /
• 2011

This research focuses on how the 'Koreanity' inherent in many traditional Korean houses of the upper class is expressed in contemporary 'Korean-style' houses, and how aspects regarded as configurational characteristics of traditional houses are expressed in them. Three types of Korean house (traditional upper class, contemporary Korean-style and contemporary architect) are quantitatively analysed using the space syntax method to investigate of the spatial configuration and their syntactic properties. The research results show that the spatial configuration of traditional houses is more integrated than that of contemporary houses. Furthermore, contemporary Korean-style houses are similar to architect's houses in terms of their spatial configurations. The configurational analyses reveal that the way in which spatial configuration is expressed in contemporary Korean-style houses is significantly different from traditional Korean houses. This result is in direct contrast to the architects' claim that their houses maintain the configurational chracteristics of traditional Korean houses.